component
PCA9548ARGER
Public Made by Adomby adom
Texas Instruments Interface - Specialized, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownPCA9548ARGER
Texas Instruments · Interface - Specialized · VQFN-24(4x4)
PCA9548ARGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD0 | bidirectional | Serial data 0. Connect to VCC through a pull-up resistor. |
| 2 | SC0 | bidirectional | Serial clock 0. Connect to VCC through a pull-up resistor. |
| 3 | SD1 | bidirectional | Serial data 1. Connect to VCC through a pull-up resistor. |
| 4 | SC1 | bidirectional | Serial clock 1. Connect to VCC through a pull-up resistor. |
| 5 | SD2 | bidirectional | Serial data 2. Connect to VCC through a pull-up resistor. |
| 6 | SC2 | bidirectional | Serial clock 2. Connect to VCC through a pull-up resistor. |
| 7 | SD3 | bidirectional | Serial data 3. Connect to VCC through a pull-up resistor. |
| 8 | SC3 | bidirectional | Serial clock 3. Connect to VCC through a pull-up resistor. |
| 9 | GND | power_in | Ground. |
| 10 | SD4 | bidirectional | Serial data 4. Connect to VCC through a pull-up resistor. |
| 11 | SC4 | bidirectional | Serial clock 4. Connect to VCC through a pull-up resistor. |
| 12 | SD5 | bidirectional | Serial data 5. Connect to VCC through a pull-up resistor. |
| 13 | SC5 | bidirectional | Serial clock 5. Connect to VCC through a pull-up resistor. |
| 14 | SD6 | bidirectional | Serial data 6. Connect to VCC through a pull-up resistor. |
| 15 | SC6 | bidirectional | Serial clock 6. Connect to VCC through a pull-up resistor. |
| 16 | SD7 | bidirectional | Serial data 7. Connect to VCC through a pull-up resistor. |
| 17 | SC7 | bidirectional | Serial clock 7. Connect to VCC through a pull-up resistor. |
| 18 | A2 | input | Address input 2. Connect directly to VCC or ground. |
| 19 | SCL | bidirectional | Serial clock bus. Connect to VCC through a pull-up resistor. |
| 20 | SDA | bidirectional | Serial data bus. Connect to VCC through a pull-up resistor. |
| 21 | VCC | power_in | Supply voltage. |
| 22 | A0 | input | Address input 0. Connect directly to VCC or ground. |
| 23 | A1 | input | Address input 1. Connect directly to VCC or ground. |
| 24 | RESET | input | Active-low reset input. Connect to VCC through a pull-up resistor, if not used. |
| 25 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24(4x4) |
| Category | Interface |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
PCA9548ARGER - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm - 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
pca9548arger-etched.step/pca9548arger-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9548arger.step/pca9548arger.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
0ad97d70ad4250c5, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).