main
Ray Publish 0.1.0 8592c2d
{
  "slug": "pca9538dwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments I/O Expanders, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "pca9538dwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9538dwr.kicad_sym",
    "pca9538dwr.kicad_mod",
    "pca9538dwr.glb",
    "pca9538dwr.step",
    "pca9538dwr.lbr",
    "docs/hero.png",
    "docs/pca9538dwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pca9538dwr-hero.glb",
    "pca9538dwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "PCA9538DWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "I/O Expanders",
    "datasheet": "http://www.ti.com/cn/lit/gpn/pca9538",
    "parts": {
      "symbol": "pca9538dwr.kicad_sym",
      "footprint": "pca9538dwr.kicad_mod",
      "model_3d": "pca9538dwr-hero.glb",
      "model_3d_plain": "pca9538dwr.glb",
      "model_3d_step": "pca9538dwr-etched.step",
      "model_3d_step_plain": "pca9538dwr.step",
      "lbr": "pca9538dwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2878559",
      "digikey": "296-21768-2-ND",
      "mouser": "595-PCA9538DWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T13:13:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-21768-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-PCA9538DWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Address input; connect directly to VCC or ground to select the I2C slave address."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Address input; connect directly to VCC or ground to select the I2C slave address."
      },
      {
        "number": "3",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input; connect to VCC through a pullup resistor if no active connection is used."
      },
      {
        "number": "4",
        "name": "P0",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "5",
        "name": "P1",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "6",
        "name": "P2",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "7",
        "name": "P3",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "9",
        "name": "P4",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "10",
        "name": "P5",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "11",
        "name": "P6",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "12",
        "name": "P7",
        "type": "bidirectional",
        "description": "P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA."
      },
      {
        "number": "13",
        "name": "INT",
        "type": "output",
        "description": "Open-drain interrupt output; connect to VCC through a pullup resistor."
      },
      {
        "number": "14",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock bus; connect to VCC through a pullup resistor."
      },
      {
        "number": "15",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data bus; connect to VCC through a pullup resistor."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, 2.3 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table and figure on page 3 are a shared 16-pin layout for the DB, DBQ, DGV, DW and PW packag; INT is an open-drain output per the datasheet, but the schema has no open-drain type, so it is typed; The datasheet does not classify SCL and SDA as ERC types. SCL is typed 'input' and SDA 'bidirectiona"
        ],
        "pages_sent": 44,
        "cost_usd": 0.1825,
        "at": "2026-10-11T13:13:13"
      },
      "datasheet": {
        "url": "http://www.ti.com/cn/lit/gpn/pca9538",
        "pages": 44,
        "sha256": "4beed336a63aeba9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9538dwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9538dwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "74026520859b8fc577a46ea1b4184f0503889d1568b2f637a1bbbde7fdd12625",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}