Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCA9538DWR

Texas Instruments · I/O Expanders · SOIC-16-300mil

PCA9538DWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Address input; connect directly to VCC or ground to select the I2C slave address.
2 A1 input Address input; connect directly to VCC or ground to select the I2C slave address.
3 RESET input Active-low reset input; connect to VCC through a pullup resistor if no active connection is used.
4 P0 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
5 P1 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
6 P2 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
7 P3 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
8 GND power_in Ground.
9 P4 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
10 P5 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
11 P6 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
12 P7 bidirectional P-port input-output with push-pull structure; when configured as an input it may be raised up to 5.5 V, and each I/O must be externally limited to 25 mA.
13 INT output Open-drain interrupt output; connect to VCC through a pullup resistor.
14 SCL input Serial clock bus; connect to VCC through a pullup resistor.
15 SDA bidirectional Serial data bus; connect to VCC through a pullup resistor.
16 VCC power_in Supply voltage, 2.3 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Interface
Pins 16

CAD (KiCad official)

  • Symbol: PCA9538DWR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: pca9538dwr-etched.step / pca9538dwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9538dwr.step / pca9538dwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 4beed336a63aeba9, retrieved 2026-10-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF