main
Ray Publish 0.2.1 7325cf1
{
  "schema_version": 1,
  "type": "component",
  "slug": "pca9535pwr",
  "title": "PCA9535PWR",
  "brief": "Texas Instruments I/O Expanders, TSSOP-24. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "comm-uart",
    "pca9535pwr"
  ],
  "component": {
    "mpn": "PCA9535PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-24",
    "pin_count": 24,
    "category": "Comm/UART",
    "subcategory": "I/O Expanders",
    "datasheet": "https://www.ti.com/lit/ds/symlink/pca9535.pdf",
    "parts": {
      "symbol": "pca9535pwr.kicad_sym",
      "footprint": "pca9535pwr.kicad_mod",
      "model_3d": "pca9535pwr-hero.glb",
      "model_3d_plain": "pca9535pwr.glb",
      "model_3d_step": "pca9535pwr-etched.step",
      "model_3d_step_plain": "pca9535pwr.step",
      "lbr": "pca9535pwr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "INT",
        "type": "output",
        "description": "Open-drain, active-low interrupt output. Asserts when any input state differs from its corresponding Input Port register value; requires an external pullup to VCC."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "I2C address input bit 1. Tie directly to VCC or GND to program the fixed I2C slave address (up to eight devices per bus)."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "I2C address input bit 2. Tie directly to VCC or GND to program the fixed I2C slave address."
      },
      {
        "number": "4",
        "name": "P00",
        "type": "bidirectional",
        "description": "Port 0 bit 0 general-purpose I/O. Push-pull structure, 5-V tolerant; configurable as input or output via the I2C Configuration register. Sink up to 25 mA / source up to 10 mA per pin."
      },
      {
        "number": "5",
        "name": "P01",
        "type": "bidirectional",
        "description": "Port 0 bit 1 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "6",
        "name": "P02",
        "type": "bidirectional",
        "description": "Port 0 bit 2 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "7",
        "name": "P03",
        "type": "bidirectional",
        "description": "Port 0 bit 3 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "8",
        "name": "P04",
        "type": "bidirectional",
        "description": "Port 0 bit 4 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "9",
        "name": "P05",
        "type": "bidirectional",
        "description": "Port 0 bit 5 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "10",
        "name": "P06",
        "type": "bidirectional",
        "description": "Port 0 bit 6 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "11",
        "name": "P07",
        "type": "bidirectional",
        "description": "Port 0 bit 7 general-purpose I/O. Push-pull, 5-V tolerant; octal current limited to 100 mA total for P00-P07."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference. Continuous current through GND rated to -250 mA."
      },
      {
        "number": "13",
        "name": "P10",
        "type": "bidirectional",
        "description": "Port 1 bit 0 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "14",
        "name": "P11",
        "type": "bidirectional",
        "description": "Port 1 bit 1 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "15",
        "name": "P12",
        "type": "bidirectional",
        "description": "Port 1 bit 2 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "16",
        "name": "P13",
        "type": "bidirectional",
        "description": "Port 1 bit 3 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "17",
        "name": "P14",
        "type": "bidirectional",
        "description": "Port 1 bit 4 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "18",
        "name": "P15",
        "type": "bidirectional",
        "description": "Port 1 bit 5 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "19",
        "name": "P16",
        "type": "bidirectional",
        "description": "Port 1 bit 6 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers."
      },
      {
        "number": "20",
        "name": "P17",
        "type": "bidirectional",
        "description": "Port 1 bit 7 general-purpose I/O. Push-pull, 5-V tolerant; octal current limited to 100 mA total for P10-P17."
      },
      {
        "number": "21",
        "name": "A0",
        "type": "input",
        "description": "I2C address input bit 0. Tie directly to VCC or GND to program the fixed I2C slave address."
      },
      {
        "number": "22",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input. Requires an external pullup resistor to VCC; supports Standard and Fast mode up to 400 kHz."
      },
      {
        "number": "23",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data line, open-drain. Requires an external pullup resistor to VCC."
      },
      {
        "number": "24",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, 2.3 V to 5.5 V. Continuous current through VCC rated to 160 mA; bypass locally to GND."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/pca9535.pdf",
        "pages": 51,
        "sha256": "83403a8bf8ce02e6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9535pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9535pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8b1df33b82044aefc6077887d894956edc41b7f0da46c4f946bd29cbfca579d4",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-24",
      "Category": "Comm/UART",
      "Pins": "24"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pca9535pwr"
  ],
  "discovery_pitch": "PCA9535PWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9535pwr.kicad_sym",
    "pca9535pwr.kicad_mod",
    "pca9535pwr.glb",
    "pca9535pwr.step",
    "pca9535pwr-etched.step",
    "pca9535pwr.lbr",
    "docs/hero.png",
    "docs/pca9535pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pca9535pwr-hero.glb",
    "pca9535pwr-hero.overlay.json"
  ],
  "visibility": "public",
  "variants": [
    {
      "mpn": "PCA9535PWR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDB",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDBR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDBQ",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDBQR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDGV",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDGVR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDW",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRDWR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRRGE",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRRGER",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRRTW",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9535PWRRTWR",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T04:08:31.388Z",
  "description": "Texas Instruments I/O Expanders, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}