main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pca9535pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pca9535pwr: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
pca9535pwr-etched.fit.json pca9535pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
pca9535pwr-etched.glb pca9535pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
pca9535pwr-etched.step pca9535pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
pca9535pwr-hero.glb pca9535pwr: hero from the plain model · Ray
pca9535pwr-hero.overlay.json pca9535pwr: hero from the plain model · Ray
pca9535pwr.glb Publish 0.1.0 · Ray
pca9535pwr.kicad_mod Publish 0.1.0 · Ray
pca9535pwr.kicad_sym Publish 0.1.0 · Ray
pca9535pwr.lbr Publish 0.1.0 · Ray
pca9535pwr.step Publish 0.1.0 · Ray
README.md pca9535pwr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

PCA9535PWR

Texas Instruments · I/O Expanders · TSSOP-24

PCA9535PWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Open-drain, active-low interrupt output. Asserts when any input state differs from its corresponding Input Port register value; requires an external pullup to VCC.
2 A1 input I2C address input bit 1. Tie directly to VCC or GND to program the fixed I2C slave address (up to eight devices per bus).
3 A2 input I2C address input bit 2. Tie directly to VCC or GND to program the fixed I2C slave address.
4 P00 bidirectional Port 0 bit 0 general-purpose I/O. Push-pull structure, 5-V tolerant; configurable as input or output via the I2C Configuration register. Sink up to 25 mA / source up to 10 mA per pin.
5 P01 bidirectional Port 0 bit 1 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
6 P02 bidirectional Port 0 bit 2 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
7 P03 bidirectional Port 0 bit 3 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
8 P04 bidirectional Port 0 bit 4 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
9 P05 bidirectional Port 0 bit 5 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
10 P06 bidirectional Port 0 bit 6 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
11 P07 bidirectional Port 0 bit 7 general-purpose I/O. Push-pull, 5-V tolerant; octal current limited to 100 mA total for P00-P07.
12 GND power_in Ground reference. Continuous current through GND rated to -250 mA.
13 P10 bidirectional Port 1 bit 0 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
14 P11 bidirectional Port 1 bit 1 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
15 P12 bidirectional Port 1 bit 2 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
16 P13 bidirectional Port 1 bit 3 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
17 P14 bidirectional Port 1 bit 4 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
18 P15 bidirectional Port 1 bit 5 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
19 P16 bidirectional Port 1 bit 6 general-purpose I/O. Push-pull, 5-V tolerant; direction and polarity set via I2C registers.
20 P17 bidirectional Port 1 bit 7 general-purpose I/O. Push-pull, 5-V tolerant; octal current limited to 100 mA total for P10-P17.
21 A0 input I2C address input bit 0. Tie directly to VCC or GND to program the fixed I2C slave address.
22 SCL input I2C serial clock input. Requires an external pullup resistor to VCC; supports Standard and Fast mode up to 400 kHz.
23 SDA bidirectional I2C serial data line, open-drain. Requires an external pullup resistor to VCC.
24 VCC power_in Supply voltage input, 2.3 V to 5.5 V. Continuous current through VCC rated to 160 mA; bypass locally to GND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-24
Category Comm/UART
Pins 24

Ordering variants

Same part, different packaging or reel option.

  • PCA9535PWR
  • PCA9535PWRDB
  • PCA9535PWRDBR
  • PCA9535PWRDBQ
  • PCA9535PWRDBQR
  • PCA9535PWRDGV
  • PCA9535PWRDGVR
  • PCA9535PWRDW
  • PCA9535PWRDWR
  • PCA9535PWRRGE
  • PCA9535PWRRGER
  • PCA9535PWRRTW
  • PCA9535PWRRTWR

CAD (KiCad official)

  • Symbol: PCA9535PWR
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: pca9535pwr-etched.step / pca9535pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9535pwr.step / pca9535pwr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
pca9535pwr.step 315 KB You want the bare part, or you mark your own boards.
pca9535pwr-etched.step 3.1 MB You want the part with PCA9535PWR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 764 faces against 387 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 83403a8bf8ce02e6, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF