main
Ray Publish 0.1.1 56eb3d4
{
  "schema_version": 1,
  "type": "component",
  "slug": "pca9517dgkr",
  "title": "PCA9517DGKR",
  "brief": "Texas Instruments Signal Buffers, Repeaters, Splitters, MSOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "pca9517dgkr"
  ],
  "component": {
    "mpn": "PCA9517DGKR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "Signal Buffers, Repeaters, Splitters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/pca9517.pdf",
    "parts": {
      "symbol": "pca9517dgkr.kicad_sym",
      "footprint": "pca9517dgkr.kicad_mod",
      "model_3d": "pca9517dgkr-hero.glb",
      "model_3d_plain": "pca9517dgkr.glb",
      "model_3d_step": "pca9517dgkr-etched.step",
      "model_3d_step_plain": "pca9517dgkr.step",
      "lbr": "pca9517dgkr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VCCA",
        "type": "power_in",
        "description": "A-side supply voltage (0.9 V to 5.5 V). Provides the 0.3 x VCCA reference used by the A-side comparators and the power-good detect circuit."
      },
      {
        "number": "2",
        "name": "SCLA",
        "type": "bidirectional",
        "description": "Serial clock bus, A side (open-drain). Connect to VCCA through an external pullup resistor."
      },
      {
        "number": "3",
        "name": "SDAA",
        "type": "bidirectional",
        "description": "Serial data bus, A side (open-drain). Connect to VCCA through an external pullup resistor."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Supply ground reference (0 V)."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Active-high repeater enable input. Internally pulled up to VCCB; drive low to disable the repeater and isolate the two buses. Should only change state when the bus is idle."
      },
      {
        "number": "6",
        "name": "SDAB",
        "type": "bidirectional",
        "description": "Serial data bus, B side (open-drain). Connect to VCCB through an external pullup resistor."
      },
      {
        "number": "7",
        "name": "SCLB",
        "type": "bidirectional",
        "description": "Serial clock bus, B side (open-drain). Connect to VCCB through an external pullup resistor."
      },
      {
        "number": "8",
        "name": "VCCB",
        "type": "power_in",
        "description": "B-side and device supply voltage (2.7 V to 5.5 V). Powers the PCA9517 logic and all I/Os."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/pca9517.pdf",
        "pages": 25,
        "sha256": "bdd9a889c16f5f5a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9517dgkr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9517dgkr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          0.95
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b074833e605c7ce3bc16a427c92c64ad379a6bcaf9f5b2a1ca798c1ae4b16b38",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "MSOP-8",
      "Category": "Interface",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "PCA9517DGKR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9517DGKRD",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9517DGKRDR",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pca9517dgkr"
  ],
  "discovery_pitch": "PCA9517DGKR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9517dgkr.kicad_sym",
    "pca9517dgkr.kicad_mod",
    "pca9517dgkr.glb",
    "pca9517dgkr.step",
    "pca9517dgkr.lbr",
    "docs/hero.png",
    "docs/pca9517dgkr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pca9517dgkr-etched.step",
    "pca9517dgkr-hero.glb",
    "pca9517dgkr-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-25T04:08:15.259Z",
  "description": "Texas Instruments Signal Buffers, Repeaters, Splitters, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}