← Commit history
Publish 0.1.1
4 files changed
+421−11
package.json+151−4@@ -1,6 +1,6 @@ { "slug": "pca9517dgkr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Signal Buffers, Repeaters, Splitters, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,153 @@ "docs/hero.png", "docs/pca9517dgkr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "pca9517dgkr-etched.step",+ "pca9517dgkr-hero.glb",+ "pca9517dgkr-hero.overlay.json"+ ],+ "component": {+ "mpn": "PCA9517DGKR",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "Interface",+ "subcategory": "Signal Buffers, Repeaters, Splitters",+ "datasheet": "https://www.ti.com/lit/ds/symlink/pca9517.pdf",+ "parts": {+ "symbol": "pca9517dgkr.kicad_sym",+ "footprint": "pca9517dgkr.kicad_mod",+ "model_3d": "pca9517dgkr-hero.glb",+ "model_3d_plain": "pca9517dgkr.glb",+ "model_3d_step": "pca9517dgkr-etched.step",+ "model_3d_step_plain": "pca9517dgkr.step",+ "lbr": "pca9517dgkr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VCCA",+ "type": "power_in",+ "description": "A-side supply voltage (0.9 V to 5.5 V). Provides the 0.3 x VCCA reference used by the A-side comparators and the power-good detect circuit."+ },+ {+ "number": "2",+ "name": "SCLA",+ "type": "bidirectional",+ "description": "Serial clock bus, A side (open-drain). Connect to VCCA through an external pullup resistor."+ },+ {+ "number": "3",+ "name": "SDAA",+ "type": "bidirectional",+ "description": "Serial data bus, A side (open-drain). Connect to VCCA through an external pullup resistor."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Supply ground reference (0 V)."+ },+ {+ "number": "5",+ "name": "EN",+ "type": "input",+ "description": "Active-high repeater enable input. Internally pulled up to VCCB; drive low to disable the repeater and isolate the two buses. Should only change state when the bus is idle."+ },+ {+ "number": "6",+ "name": "SDAB",+ "type": "bidirectional",+ "description": "Serial data bus, B side (open-drain). Connect to VCCB through an external pullup resistor."+ },+ {+ "number": "7",+ "name": "SCLB",+ "type": "bidirectional",+ "description": "Serial clock bus, B side (open-drain). Connect to VCCB through an external pullup resistor."+ },+ {+ "number": "8",+ "name": "VCCB",+ "type": "power_in",+ "description": "B-side and device supply voltage (2.7 V to 5.5 V). Powers the PCA9517 logic and all I/Os."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/pca9517.pdf",+ "pages": 25,+ "sha256": "bdd9a889c16f5f5a",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "pca9517dgkr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "pca9517dgkr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b074833e605c7ce3bc16a427c92c64ad379a6bcaf9f5b2a1ca798c1ae4b16b38",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "PCA9517DGKR",+ "brief": "Texas Instruments Signal Buffers, Repeaters, Splitters, MSOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "MSOP-8",+ "Category": "Interface",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "pca9517dgkr"+ ],+ "discovery_pitch": "PCA9517DGKR (Texas Instruments) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "pca9517dgkr", "title": "PCA9517DGKR", "brief": "Texas Instruments Signal Buffers, Repeaters, Splitters, MSOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -192,10 +192,13 @@ "docs/hero.png", "docs/pca9517dgkr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pca9517dgkr-etched.step",+ "pca9517dgkr-hero.glb",+ "pca9517dgkr-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-25T04:08:15.259Z"-}+ "visibility": "public",+ "updated_at": "2026-09-25T04:08:15.259Z",+ "description": "Texas Instruments Signal Buffers, Repeaters, Splitters, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}
pca9517dgkr-hero.glbadded⋯ 1 unchanged line ⋯
pca9517dgkr-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "PCA9517DGKR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 5.85,+ "dash_mm": 0.1462,+ "gap_mm": 0.0878,+ "pad_stroke_mm": 0.0351+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.468,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.45,+ 2.45,+ -1.125,+ 1.125+ ],+ "pads_bbox_mm": [+ -2.925,+ 2.925,+ -1.175,+ 1.175+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "pca9517dgkr-etched.glb",+ "glb_sha256": "e1fc7a4a188d7311ff39615b5930fd06a5aaa699893d2d1e72cf7712a9556bbd",+ "footprint": "pca9517dgkr.kicad_mod",+ "footprint_sha256": "c85207be7edf4b5e1a128249fb05f91b67d622f536fc832d7a9f2a7f1e9a1223",+ "pins": "page.json component.pins",+ "pins_sha256": "0cdc6fd5d539b72f32f984e946a628209b5774c636c7b2a35433b00630a339e1"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "VCCA",+ "x": -3.025,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "SCLA",+ "x": -3.025,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "SDAA",+ "x": -3.025,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -3.025,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "EN",+ "x": 3.025,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "SDAB",+ "x": 3.025,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "SCLB",+ "x": 3.025,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "VCCB",+ "x": 3.025,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ -0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ -0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ 0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.1125,+ 0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ 0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ 0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ -0.325+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.1125,+ -0.975+ ],+ "size_mm": [+ 1.625,+ 0.4+ ],+ "rot": 0.0+ }+ ]+}