PAM2863ECR

{
 "schema": "adom.pads/1",
 "slug": "pam2863ecr",
 "footprint": "Diodes_SO-8EP",
 "generated_from": {
  "footprint": "Diodes_SO-8EP@sha256:e4747640ff122bb4",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.4975,
   -1.905
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "Diodes_SO-8EP@sha256:e4747640ff122bb4"
 },
 "pad_count": 9,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "VIN",
   "type": "power_in",
   "description": "Input supply voltage, 4.5V to 40V (absolute max -0.3V to +40V). Decouple to ground with a 10µF or higher X7R ceramic capacitor placed close to the device.",
   "is_pin1": true,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "ISENSE",
   "type": "input",
   "description": "High-side current-sense input. Connect resistor Rs from this pin to VIN to program the nominal average output current: IOUT(nom) = 0.1V / Rs (VSENSE typical 100mV). Input current typ. 8µA.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "AGND",
   "type": "power_in",
   "description": "Analog ground (0V). Shown as AGND on the pin-assignment diagram; the pin-description table groups pins 3, 7, 8 together as GND. Tie to the ground plane.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VSET",
   "type": "input",
   "description": "Multi-function on/off and brightness control. Leave floating for normal operation. Drive <0.2V to disable output; DC voltage 0.3V-2.5V adjusts output current from 12% to 100% of IOUT(nom); PWM (open-collector/open-drain) at f<500Hz gives 1%-100% range. A capacitor from VSET to GND sets soft-start time (default ~0.1ms; ~1.5ms with 1nF). Abs max -0.3V to +6.0V.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "LX",
   "type": "output",
   "description": "Drain of internal 40V NDMOS switch. Connect to the external Schottky diode / inductor node of the step-down power stage. Rated to 40V, RDS(on) typ. 0.3Ω @ 100mA, peak inductor current limit 2.5A. Pins 5 and 6 are internally tied and should both be soldered.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "LX",
   "type": "output",
   "description": "Drain of internal 40V NDMOS switch (paralleled with pin 5 for current handling / thermal). Same electrical net as pin 5.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "PGND",
   "type": "power_in",
   "description": "Power ground return for the internal NDMOS switch (0V). Pin-assignment diagram labels PGND; pin-description table groups pins 3,7,8 as GND. Tie to ground plane; keep return path to the input capacitor short.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "PGND",
   "type": "power_in",
   "description": "Power ground return for the internal NDMOS switch (0V), paralleled with pin 7.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "rect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.613,
    3.502
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": true,
   "pin": "9",
   "name": "EP",
   "type": "passive",
   "description": "Exposed thermal pad on package underside (SO-8EP). Solder to ground copper for heat dissipation; electrically tied to GND.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}