main
Ray Publish 0.1.0 9eddf9d
{
  "slug": "pac1951t-1e-4mx",
  "version": "0.1.0",
  "type": "component",
  "description": "MICROCHIP TECHNOLOGY Global Sourcing Parts, VQFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "pac1951t-1e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pac1951t-1e-4mx.kicad_sym",
    "pac1951t-1e-4mx.kicad_mod",
    "pac1951t-1e-4mx.glb",
    "pac1951t-1e-4mx.step",
    "pac1951t-1e-4mx.lbr",
    "docs/hero.png",
    "docs/pac1951t-1e-4mx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pac1951t-1e-4mx-hero.glb",
    "pac1951t-1e-4mx-hero.overlay.json",
    "pac1951t-1e-4mx-etched.glb"
  ],
  "component": {
    "mpn": "PAC1951T-1E/4MX",
    "manufacturer": "MICROCHIP TECHNOLOGY",
    "package": "VQFN-16(3x3)",
    "pin_count": 17,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/PAC195X-Family-Data-Sheet-20006539B.pdf",
    "parts": {
      "symbol": "pac1951t-1e-4mx.kicad_sym",
      "footprint": "pac1951t-1e-4mx.kicad_mod",
      "model_3d": "pac1951t-1e-4mx-hero.glb",
      "model_3d_plain": "pac1951t-1e-4mx-etched.glb",
      "model_3d_step": "pac1951t-1e-4mx-etched.step",
      "model_3d_step_plain": "pac1951t-1e-4mx.step",
      "lbr": "pac1951t-1e-4mx.lbr"
    },
    "distributor_links": {
      "lcsc": "C5226663"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T08:45:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SLOW/ALERT1",
        "type": "bidirectional",
        "description": "Default SLOW input: when high, all channels sample at 8 SPS; it may be programmed as the ALERT1 pin (open-drain, needs a pull-up resistor to VDD) or as a GPIO (default input, configurable as open-drain output)."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive power supply input, 2.7V to 5.5V; bypass with a 100 nF ceramic capacitor to ground near the IC."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground for the IC (system ground)."
      },
      {
        "number": "4",
        "name": "SCL",
        "type": "input",
        "description": "SMBus/I2C clock input; requires an external pull-up resistor, except in High-Speed mode, which requires a CMOS driver from the host."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "SMBus/I2C bidirectional data pin; open-drain, requires a pull-up resistor to VDD."
      },
      {
        "number": "6",
        "name": "ADDRSEL",
        "type": "passive",
        "description": "Address selection: connect a single resistor from this pin to ground to set the SMBus client address per Table 6-1."
      },
      {
        "number": "7",
        "name": "SENSE3-",
        "type": "passive",
        "description": "For PAC1951-1 this pin is not connected internally and must be grounded."
      },
      {
        "number": "8",
        "name": "SENSE3+",
        "type": "passive",
        "description": "For PAC1951-1 this pin is not connected internally and must be grounded."
      },
      {
        "number": "9",
        "name": "SENSE4-",
        "type": "passive",
        "description": "For PAC1951-1 this pin is not connected internally and must be grounded."
      },
      {
        "number": "10",
        "name": "SENSE4+",
        "type": "passive",
        "description": "For PAC1951-1 this pin is not connected internally and must be grounded."
      },
      {
        "number": "11",
        "name": "SENSE1+",
        "type": "input",
        "description": "Analog input, 0-FSR, connect to the supply side of the sense resistor; it also serves as the bus voltage (VBUS) input, with a safe operating voltage up to 32V."
      },
      {
        "number": "12",
        "name": "SENSE1-",
        "type": "input",
        "description": "Analog input, 0-FSR, connect to the load side of the sense resistor; safe operating voltage up to 32V."
      },
      {
        "number": "13",
        "name": "SENSE2+",
        "type": "passive",
        "description": "For PAC1951-1 this pin is not connected internally and must be grounded."
      },
      {
        "number": "14",
        "name": "SENSE2-",
        "type": "passive",
        "description": "For PAC1951-1 this pin is not connected internally and must be grounded."
      },
      {
        "number": "15",
        "name": "GPIO/ALERT2",
        "type": "bidirectional",
        "description": "Default GPIO input; may be programmed as the ALERT2 pin or as a GPIO output, both open-drain, requiring a pull-up resistor to VDD."
      },
      {
        "number": "16",
        "name": "PWRDN",
        "type": "input",
        "description": "Active-low power-down input; when pulled low, all circuitry including the SMBus is powered down."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "unconnected",
        "description": "Exposed thermal pad is not electrically connected inside the device; it is recommended to connect it to ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 3-1 note 1 says these pins are not connected inside for PAC1951-1 and must be grounded; typed ; The exposed pad is listed in Table 3-1 as pin 17 (EP) rather than a numbered 1-16 pad; it is include; Table 3-1 types ADDRSEL as Analog I/O, but the datasheet describes it only as a resistor-to-ground a"
        ],
        "pages_sent": 96,
        "cost_usd": 0.4165,
        "at": "2026-11-11T08:45:05"
      },
      "datasheet": {
        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/PAC195X-Family-Data-Sheet-20006539B.pdf",
        "pages": 96,
        "sha256": "52bb78abaa920f4f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pac1951t-1e-4mx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pac1951t-1e-4mx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "57c322b660cd00f11bce2c03551436db966283936aaec4f712d8998fff3c3f18",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "4MX",
      "source_page": 85,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.85,
        "range_mm": [
          0.8,
          0.9
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "pac1951t-1e-4mx.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}