main
Ray
Publish 0.1.0
2535927
PA6582-AL
Coilcraft · IC · Unknown
PA6582-AL from Coilcraft, in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Primary winding (1-2); the two primaries are connected in parallel on the PCB |
| 2 | 2 | passive | Primary winding (1-2) |
| 3 | 3 | passive | Primary winding (3-4) |
| 4 | 4 | passive | Primary winding (3-4) |
| 5 | 5 | passive | Auxiliary winding (5-6) |
| 6 | 6 | passive | Auxiliary winding (5-6) |
| 7 | 7 | passive | Secondary winding (12-7) |
| 8 | 8 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 9 | 9 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 10 | 10 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 11 | 11 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 12 | 12 | passive | Secondary winding (12-7) |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | Unknown |
| Category | |
| Pins | 12 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance at 0 A (primary) | L | -10 | 10 | % | Primary, 150 kHz, 0.1 Vrms, 0 Adc | 1 | |
| Inductance at 0 A (primary) nominal | L | 9 | µH | 150 kHz, 0.1 Vrms, 0 Adc | 1 | ||
| Inductance at Ipk | L | 7.2 | µH | at Ipk | 1 | ||
| DCR primary | DCR | 0.01 | Ohms | Both windings connected in parallel | 1 | ||
| DCR secondary | DCR | 0.162 | Ohms | 1 | |||
| DCR auxiliary | DCR | 0.131 | Ohms | 1 | |||
| Leakage inductance | 0.1 | µH | Primary, secondary windings shorted | 1 | |||
| Peak primary current | Ipk | 10.3 | A | Peak primary current at minimum input voltage | 1 | ||
| Turns ratio pri:sec | 5 | 1:5, primary windings in parallel | 1 | ||||
| Turns ratio pri:aux | 1 | 1:1, primary windings in parallel | 1 | ||||
| Isolation pri and aux to sec | 1500 | Vrms | One minute | 1 | |||
| Isolation pri to aux | 500 | Vrms | 1 | ||||
| Ambient temperature | -40 | 85 | °C | 1 | |||
| Maximum part temperature | 125 | °C | Ambient + temp rise | 1 | |||
| Storage temperature, component | -40 | 125 | °C | Component | 1 | ||
| Storage temperature, tape and reel | -40 | 80 | °C | Tape and reel packaging | 1 | ||
| Input voltage | 6 | 32 | V | Operates at 150 kHz | 1 | ||
| Operating frequency | 150 | kHz | 1 | ||||
| Output voltage | 54 | V | 0.6 A output | 1 | |||
| Output current | 0.6 | A | 54 V output | 1 | |||
| Auxiliary output voltage | 10.2 | V | Output of auxiliary winding | 1 |
CAD (Adom-generated)
- Symbol:
PA6582-AL - Footprint:
Adom_Gen:Coilcraft_PA6582_68fd6b - 3D model: generated to fit the land (STEP)
- 3D model files:
pa6582-al-etched.step/pa6582-al-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pa6582-al.step/pa6582-al.glbare the bare package body.
Provenance
No distributor stocks PA6582-AL yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Coilcraft datasheet (2 pp, sha256
694000b4493be364, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# PA6582-AL
**Coilcraft** · IC · Unknown
PA6582-AL from Coilcraft, in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Primary winding (1-2); the two primaries are connected in parallel on the PCB |
| 2 | 2 | passive | Primary winding (1-2) |
| 3 | 3 | passive | Primary winding (3-4) |
| 4 | 4 | passive | Primary winding (3-4) |
| 5 | 5 | passive | Auxiliary winding (5-6) |
| 6 | 6 | passive | Auxiliary winding (5-6) |
| 7 | 7 | passive | Secondary winding (12-7) |
| 8 | 8 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 9 | 9 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 10 | 10 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 11 | 11 | unconnected | Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected |
| 12 | 12 | passive | Secondary winding (12-7) |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | Unknown |
| Category | |
| Pins | 12 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance at 0 A (primary) | L | -10 | | 10 | % | Primary, 150 kHz, 0.1 Vrms, 0 Adc | 1 |
| Inductance at 0 A (primary) nominal | L | | 9 | | µH | 150 kHz, 0.1 Vrms, 0 Adc | 1 |
| Inductance at Ipk | L | 7.2 | | | µH | at Ipk | 1 |
| DCR primary | DCR | | | 0.01 | Ohms | Both windings connected in parallel | 1 |
| DCR secondary | DCR | | | 0.162 | Ohms | | 1 |
| DCR auxiliary | DCR | | | 0.131 | Ohms | | 1 |
| Leakage inductance | | | | 0.1 | µH | Primary, secondary windings shorted | 1 |
| Peak primary current | Ipk | | 10.3 | | A | Peak primary current at minimum input voltage | 1 |
| Turns ratio pri:sec | | | 5 | | | 1:5, primary windings in parallel | 1 |
| Turns ratio pri:aux | | | 1 | | | 1:1, primary windings in parallel | 1 |
| Isolation pri and aux to sec | | 1500 | | | Vrms | One minute | 1 |
| Isolation pri to aux | | 500 | | | Vrms | | 1 |
| Ambient temperature | | -40 | | 85 | °C | | 1 |
| Maximum part temperature | | | | 125 | °C | Ambient + temp rise | 1 |
| Storage temperature, component | | -40 | | 125 | °C | Component | 1 |
| Storage temperature, tape and reel | | -40 | | 80 | °C | Tape and reel packaging | 1 |
| Input voltage | | 6 | | 32 | V | Operates at 150 kHz | 1 |
| Operating frequency | | | 150 | | kHz | | 1 |
| Output voltage | | | 54 | | V | 0.6 A output | 1 |
| Output current | | | 0.6 | | A | 54 V output | 1 |
| Auxiliary output voltage | | | 10.2 | | V | Output of auxiliary winding | 1 |
## CAD (Adom-generated)
- Symbol: `PA6582-AL`
- Footprint: `Adom_Gen:Coilcraft_PA6582_68fd6b`
- 3D model: generated to fit the land (STEP)
- 3D model files: `pa6582-al-etched.step` / `pa6582-al-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pa6582-al.step` / `pa6582-al.glb` are the bare package body.
## Provenance
> No distributor stocks PA6582-AL yet. This page was built from the datasheet.
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Coilcraft datasheet](https://www.coilcraft.com/getmedia/21ff54fe-ddad-4bf4-9690-375ad1c75496/pa6582.pdf) (2 pp, sha256 `694000b4493be364`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/pa6582-al-datasheet.pdf)