main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pa6582-al: viewers · Ray
pa6582-al-etched.glb pa6582-al: factory component page (tier=mfr) · Ray
pa6582-al-etched.step pa6582-al: factory component page (tier=mfr) · Ray
pa6582-al-hero.glb pa6582-al: hero GLB from the etched model (keeps the MPN mark) · Ray
pa6582-al-hero.overlay.json pa6582-al: hero GLB from the etched model (keeps the MPN mark) · Ray
pa6582-al.glb Publish 0.1.0 · Ray
pa6582-al.kicad_mod Publish 0.1.0 · Ray
pa6582-al.kicad_sym Publish 0.1.0 · Ray
pa6582-al.lbr Publish 0.1.0 · Ray
pa6582-al.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 12 pins · Ray

PA6582-AL

Coilcraft · IC · Unknown

PA6582-AL from Coilcraft, in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Primary winding (1-2); the two primaries are connected in parallel on the PCB
2 2 passive Primary winding (1-2)
3 3 passive Primary winding (3-4)
4 4 passive Primary winding (3-4)
5 5 passive Auxiliary winding (5-6)
6 6 passive Auxiliary winding (5-6)
7 7 passive Secondary winding (12-7)
8 8 unconnected Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected
9 9 unconnected Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected
10 10 unconnected Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected
11 11 unconnected Terminal present (body outline and recommended land show 12) but no winding is drawn to it in the schematic: not connected
12 12 passive Secondary winding (12-7)

Key specifications

Parameter Value
Manufacturer Coilcraft
Package Unknown
Category
Pins 12

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance at 0 A (primary) L -10 10 % Primary, 150 kHz, 0.1 Vrms, 0 Adc 1
Inductance at 0 A (primary) nominal L 9 µH 150 kHz, 0.1 Vrms, 0 Adc 1
Inductance at Ipk L 7.2 µH at Ipk 1
DCR primary DCR 0.01 Ohms Both windings connected in parallel 1
DCR secondary DCR 0.162 Ohms 1
DCR auxiliary DCR 0.131 Ohms 1
Leakage inductance 0.1 µH Primary, secondary windings shorted 1
Peak primary current Ipk 10.3 A Peak primary current at minimum input voltage 1
Turns ratio pri:sec 5 1:5, primary windings in parallel 1
Turns ratio pri:aux 1 1:1, primary windings in parallel 1
Isolation pri and aux to sec 1500 Vrms One minute 1
Isolation pri to aux 500 Vrms 1
Ambient temperature -40 85 °C 1
Maximum part temperature 125 °C Ambient + temp rise 1
Storage temperature, component -40 125 °C Component 1
Storage temperature, tape and reel -40 80 °C Tape and reel packaging 1
Input voltage 6 32 V Operates at 150 kHz 1
Operating frequency 150 kHz 1
Output voltage 54 V 0.6 A output 1
Output current 0.6 A 54 V output 1
Auxiliary output voltage 10.2 V Output of auxiliary winding 1

CAD (Adom-generated)

  • Symbol: PA6582-AL
  • Footprint: Adom_Gen:Coilcraft_PA6582_68fd6b
  • 3D model: generated to fit the land (STEP)
  • 3D model files: pa6582-al-etched.step / pa6582-al-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pa6582-al.step / pa6582-al.glb are the bare package body.

Provenance

No distributor stocks PA6582-AL yet. This page was built from the datasheet.

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Coilcraft datasheet (2 pp, sha256 694000b4493be364, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF