P25Q16SH-UXH-IR

{
  "slug": "p25q16sh-uxh-ir",
  "version": "0.1.0",
  "type": "component",
  "description": "PUYA NOR FLASH, USON-8(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "p25q16sh-uxh-ir",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "p25q16sh-uxh-ir.kicad_sym",
    "p25q16sh-uxh-ir.kicad_mod",
    "p25q16sh-uxh-ir.glb",
    "p25q16sh-uxh-ir.step",
    "p25q16sh-uxh-ir.lbr",
    "docs/hero.png",
    "docs/p25q16sh-uxh-ir-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "p25q16sh-uxh-ir-hero.glb",
    "p25q16sh-uxh-ir-hero.overlay.json",
    "p25q16sh-uxh-ir-etched.glb"
  ],
  "component": {
    "mpn": "P25Q16SH-UXH-IR",
    "manufacturer": "PUYA",
    "package": "USON-8(2x3)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603090573146673152",
    "parts": {
      "symbol": "p25q16sh-uxh-ir.kicad_sym",
      "footprint": "p25q16sh-uxh-ir.kicad_mod",
      "model_3d": "p25q16sh-uxh-ir-hero.glb",
      "model_3d_plain": "p25q16sh-uxh-ir-etched.glb",
      "model_3d_step": "p25q16sh-uxh-ir-etched.step",
      "model_3d_step_plain": "p25q16sh-uxh-ir.step",
      "lbr": "p25q16sh-uxh-ir.lbr"
    },
    "distributor_links": {
      "lcsc": "C7466821"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T01:00:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip select input; the CS# notation denotes active-low selection."
      },
      {
        "number": "2",
        "name": "SO",
        "type": "bidirectional",
        "description": "Serial data output for 1x I/O and serial data input and output for 4x I/O read mode."
      },
      {
        "number": "3",
        "name": "WP#",
        "type": "bidirectional",
        "description": "Write protection input, active low, and serial data input and output for 4x I/O read mode; WP# and HOLD# functions are only available for Standard/Dual SPI."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground of the device."
      },
      {
        "number": "5",
        "name": "SI",
        "type": "bidirectional",
        "description": "Serial data input for 1x I/O and serial data input and output for 4x I/O read mode."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial interface clock input."
      },
      {
        "number": "7",
        "name": "HOLD#/RESET#",
        "type": "bidirectional",
        "description": "Hardware reset pin, active low, or pauses the device without deselecting it; also serial data input and output for 4x I/O read mode, and available only for Standard/Dual SPI."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply of the device, specified for 2.3V to 3.6V."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package naming mismatch: the hint says USON-8(2x3), while the datasheet specifies 8-Land USON 3x2x0.; The package drawing for the 8-Land USON (3x2x0.55mm) is on datasheet page 106, which is not in the p; The datasheet does not state a pin 1 marking, exposed-pad presence, or pad connection for the USON p",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0631,
        "at": "2026-10-19T00:56:45"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603090573146673152",
        "pages": 109,
        "sha256": "d5af0ef8b9726b7e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "p25q16sh-uxh-ir.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          2.0,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f8675d4a862b308a238f414ebbe6735ae1f9f3f853192c09e1ec51020f58a7e9",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "p25q16sh-uxh-ir-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          2.0,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "881be9f1e2f9a36de54625f1a306ffb95d723f50fd3274b503de0b4bdcd82cda",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}