main
Ray
Publish 0.1.0
2fec998
P24C32C-SSH-MIR
PUYA) · EEPROM · SOP-8
P24C32C-SSH-MIR from PUYA), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Slave address setting input (device address bit E0); internally pulled down to GND if left floating. |
| 2 | E1 | input | Slave address setting input (device address bit E1); internally pulled down to GND if left floating. |
| 3 | E2 | input | Slave address setting input (device address bit E2); internally pulled down to GND if left floating. |
| 4 | GND | power_in | Ground. |
| 5 | SDA | bidirectional | Serial data input/output; open-drain driven and may be wire-ORed with other open-drain or open-collector devices. |
| 6 | SCL | input | Serial clock input; positive edge clocks data in and negative edge clocks data out. |
| 7 | WCB | input | Write control input; connected to VCC inhibits all write operations, connected to GND (or floating, internally pulled down) allows normal writes. |
| 8 | VCC | power_in | Power supply, 1.7V to 5.5V for the -MI grade (MPN suffix MI). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PUYA) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (P24C32C-MI) | VCC | 1.7 | 5.5 | V | P24C32C-MI | 4 | |
| Standby Current | Isb | 1 | uA | Vcc = 3.3V, TA = 85°C | 4 | ||
| Standby Current | Isb | 3 | uA | Vcc = 5.5V, TA = 85°C | 4 | ||
| Supply Current Read | ICC1 | 0.2 | 0.4 | mA | Vcc=5.5V, Read at 400Khz | 4 | |
| Supply Current Write | ICC2 | 0.8 | 1.6 | mA | Vcc=5.5V, Write at 400Khz | 4 | |
| Input Leakage Current | ILI | 0.1 | 1 | µA | VIN = VCC or GND | 4 | |
| Output Leakage Current | ILO | 0.05 | 1 | µA | VOUT = VCC or GND | 4 | |
| Input Low Level | VIL | -0.6 | V | max printed as 0.3VCC | 4 | ||
| Input High Level | VIH | 0.7 | xVCC | min printed as 0.7VCC; max printed as VCC+0.5 V | 4 | ||
| Output Low Level VCC = 1.7V (SDA) | VOL1 | 0.2 | V | IOL = 1.5 mA | 4 | ||
| Output Low Level VCC = 3.0V (SDA) | VOL2 | 0.4 | V | IOL = 2.1 mA | 4 | ||
| Input / Output Capacitance (SDA) | CI/O | 8 | pF | VI/O=GND; TA = 25°C, F = 1MHz, Vcc = 5.0V | 4 | ||
| Input Capacitance (E0,E1,E2,WCB,SCL) | CIN | 6 | pF | VIN=GND; TA = 25°C, F = 1MHz, Vcc = 5.0V | 4 | ||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Operation Temperature | -40 | 125 | °C | 4 | |||
| Maximum Operation Voltage | 6.25 | V | 4 | ||||
| Voltage on Any Pin with Respect to Ground | -1 | V | max printed as (Vcc+1.0) V | 4 | |||
| DC Output Current | 5 | mA | 4 | ||||
| Clock Frequency, SCL | fSCL | 400 | kHz | 1.7≤VCC<2.5 | 5 | ||
| Clock Frequency, SCL | fSCL | 1000 | kHz | 2.5≤VCC≤5.5 | 5 | ||
| Clock Pulse Width Low | tLOW | 1.3 | µs | 1.7≤VCC<2.5 | 5 | ||
| Clock Pulse Width Low | tLOW | 0.4 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Clock Pulse Width High | tHIGH | 0.6 | µs | 1.7≤VCC<2.5 | 5 | ||
| Clock Pulse Width High | tHIGH | 0.4 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Clock Low to Data Out Valid | tAA | 0.05 | 0.9 | µs | 1.7≤VCC<2.5 | 5 | |
| Clock Low to Data Out Valid | tAA | 0.05 | 0.55 | µs | 2.5≤VCC≤5.5 | 5 | |
| Noise Suppression Time | tI | 0.1 | µs | 1.7≤VCC<2.5 | 5 | ||
| Noise Suppression Time | tI | 0.05 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Bus Free Time before new transmission | tBUF | 1.3 | µs | 1.7≤VCC<2.5 | 5 | ||
| Bus Free Time before new transmission | tBUF | 0.5 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Start Hold Time | tHD.STA | 0.6 | µs | 1.7≤VCC<2.5 | 5 | ||
| Start Hold Time | tHD.STA | 0.25 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Start Setup Time | tSU.STA | 0.6 | µs | 1.7≤VCC<2.5 | 5 | ||
| Start Setup Time | tSU.STA | 0.25 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Data In Hold Time | tHD.DAT | 0 | µs | 1.7≤VCC≤5.5 | 5 | ||
| Data In Setup Time | tSU.DAT | 0.1 | µs | 1.7≤VCC≤5.5 | 5 | ||
| Inputs Rise Time | tR | 0.3 | µs | 1.7≤VCC≤5.5; ensured by characterization | 5 | ||
| Inputs Fall Time | tF | 0.3 | µs | 1.7≤VCC<2.5; ensured by characterization | 5 | ||
| Inputs Fall Time | tF | 0.1 | µs | 2.5≤VCC≤5.5; ensured by characterization | 5 | ||
| Stop Setup Time | tSU.STO | 0.6 | µs | 1.7≤VCC<2.5 | 5 | ||
| Stop Setup Time | tSU.STO | 0.25 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Data Out Hold Time | tDH | 0.05 | µs | 1.7≤VCC≤5.5 | 5 | ||
| WCB pin Setup Time | tSU.WCB | 1.2 | µs | 1.7≤VCC<2.5 | 5 | ||
| WCB pin Setup Time | tSU.WCB | 0.6 | µs | 2.5≤VCC≤5.5 | 5 | ||
| WCB pin Hold Time | tHD.WCB | 1.2 | µs | 1.7≤VCC<2.5 | 5 | ||
| WCB pin Hold Time | tHD.WCB | 0.6 | µs | 2.5≤VCC≤5.5 | 5 | ||
| Write Cycle Time | tWR | 5 | ms | 1.7≤VCC≤5.5 | 5 | ||
| Endurance | EDR | 1e+06 | Write cycles | 25°C, 3.3V, Page mode | 5 | ||
| Data retention | DRET | 100 | Years | 5 |
CAD (KiCad official)
- Symbol:
P24C32C-SSH-MIR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
p24c32c-ssh-mir-etched.step/p24c32c-ssh-mir-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p24c32c-ssh-mir.step/p24c32c-ssh-mir.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PUYA) datasheet (22 pp, sha256
f5219b8dd0dfcb50, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# P24C32C-SSH-MIR
**PUYA)** · EEPROM · SOP-8
P24C32C-SSH-MIR from PUYA), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Slave address setting input (device address bit E0); internally pulled down to GND if left floating. |
| 2 | E1 | input | Slave address setting input (device address bit E1); internally pulled down to GND if left floating. |
| 3 | E2 | input | Slave address setting input (device address bit E2); internally pulled down to GND if left floating. |
| 4 | GND | power_in | Ground. |
| 5 | SDA | bidirectional | Serial data input/output; open-drain driven and may be wire-ORed with other open-drain or open-collector devices. |
| 6 | SCL | input | Serial clock input; positive edge clocks data in and negative edge clocks data out. |
| 7 | WCB | input | Write control input; connected to VCC inhibits all write operations, connected to GND (or floating, internally pulled down) allows normal writes. |
| 8 | VCC | power_in | Power supply, 1.7V to 5.5V for the -MI grade (MPN suffix MI). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PUYA) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (P24C32C-MI) | VCC | 1.7 | | 5.5 | V | P24C32C-MI | 4 |
| Standby Current | Isb | | | 1 | uA | Vcc = 3.3V, TA = 85°C | 4 |
| Standby Current | Isb | | | 3 | uA | Vcc = 5.5V, TA = 85°C | 4 |
| Supply Current Read | ICC1 | | 0.2 | 0.4 | mA | Vcc=5.5V, Read at 400Khz | 4 |
| Supply Current Write | ICC2 | | 0.8 | 1.6 | mA | Vcc=5.5V, Write at 400Khz | 4 |
| Input Leakage Current | ILI | | 0.1 | 1 | µA | VIN = VCC or GND | 4 |
| Output Leakage Current | ILO | | 0.05 | 1 | µA | VOUT = VCC or GND | 4 |
| Input Low Level | VIL | -0.6 | | | V | max printed as 0.3VCC | 4 |
| Input High Level | VIH | 0.7 | | | xVCC | min printed as 0.7VCC; max printed as VCC+0.5 V | 4 |
| Output Low Level VCC = 1.7V (SDA) | VOL1 | | | 0.2 | V | IOL = 1.5 mA | 4 |
| Output Low Level VCC = 3.0V (SDA) | VOL2 | | | 0.4 | V | IOL = 2.1 mA | 4 |
| Input / Output Capacitance (SDA) | CI/O | | | 8 | pF | VI/O=GND; TA = 25°C, F = 1MHz, Vcc = 5.0V | 4 |
| Input Capacitance (E0,E1,E2,WCB,SCL) | CIN | | | 6 | pF | VIN=GND; TA = 25°C, F = 1MHz, Vcc = 5.0V | 4 |
| Storage Temperature | | -65 | | 150 | °C | | 4 |
| Operation Temperature | | -40 | | 125 | °C | | 4 |
| Maximum Operation Voltage | | | | 6.25 | V | | 4 |
| Voltage on Any Pin with Respect to Ground | | -1 | | | V | max printed as (Vcc+1.0) V | 4 |
| DC Output Current | | | | 5 | mA | | 4 |
| Clock Frequency, SCL | fSCL | | | 400 | kHz | 1.7≤VCC<2.5 | 5 |
| Clock Frequency, SCL | fSCL | | | 1000 | kHz | 2.5≤VCC≤5.5 | 5 |
| Clock Pulse Width Low | tLOW | 1.3 | | | µs | 1.7≤VCC<2.5 | 5 |
| Clock Pulse Width Low | tLOW | 0.4 | | | µs | 2.5≤VCC≤5.5 | 5 |
| Clock Pulse Width High | tHIGH | 0.6 | | | µs | 1.7≤VCC<2.5 | 5 |
| Clock Pulse Width High | tHIGH | 0.4 | | | µs | 2.5≤VCC≤5.5 | 5 |
| Clock Low to Data Out Valid | tAA | 0.05 | | 0.9 | µs | 1.7≤VCC<2.5 | 5 |
| Clock Low to Data Out Valid | tAA | 0.05 | | 0.55 | µs | 2.5≤VCC≤5.5 | 5 |
| Noise Suppression Time | tI | | | 0.1 | µs | 1.7≤VCC<2.5 | 5 |
| Noise Suppression Time | tI | | | 0.05 | µs | 2.5≤VCC≤5.5 | 5 |
| Bus Free Time before new transmission | tBUF | 1.3 | | | µs | 1.7≤VCC<2.5 | 5 |
| Bus Free Time before new transmission | tBUF | 0.5 | | | µs | 2.5≤VCC≤5.5 | 5 |
| Start Hold Time | tHD.STA | 0.6 | | | µs | 1.7≤VCC<2.5 | 5 |
| Start Hold Time | tHD.STA | 0.25 | | | µs | 2.5≤VCC≤5.5 | 5 |
| Start Setup Time | tSU.STA | 0.6 | | | µs | 1.7≤VCC<2.5 | 5 |
| Start Setup Time | tSU.STA | 0.25 | | | µs | 2.5≤VCC≤5.5 | 5 |
| Data In Hold Time | tHD.DAT | 0 | | | µs | 1.7≤VCC≤5.5 | 5 |
| Data In Setup Time | tSU.DAT | 0.1 | | | µs | 1.7≤VCC≤5.5 | 5 |
| Inputs Rise Time | tR | | | 0.3 | µs | 1.7≤VCC≤5.5; ensured by characterization | 5 |
| Inputs Fall Time | tF | | | 0.3 | µs | 1.7≤VCC<2.5; ensured by characterization | 5 |
| Inputs Fall Time | tF | | | 0.1 | µs | 2.5≤VCC≤5.5; ensured by characterization | 5 |
| Stop Setup Time | tSU.STO | 0.6 | | | µs | 1.7≤VCC<2.5 | 5 |
| Stop Setup Time | tSU.STO | 0.25 | | | µs | 2.5≤VCC≤5.5 | 5 |
| Data Out Hold Time | tDH | 0.05 | | | µs | 1.7≤VCC≤5.5 | 5 |
| WCB pin Setup Time | tSU.WCB | 1.2 | | | µs | 1.7≤VCC<2.5 | 5 |
| WCB pin Setup Time | tSU.WCB | 0.6 | | | µs | 2.5≤VCC≤5.5 | 5 |
| WCB pin Hold Time | tHD.WCB | 1.2 | | | µs | 1.7≤VCC<2.5 | 5 |
| WCB pin Hold Time | tHD.WCB | 0.6 | | | µs | 2.5≤VCC≤5.5 | 5 |
| Write Cycle Time | tWR | | | 5 | ms | 1.7≤VCC≤5.5 | 5 |
| Endurance | EDR | 1e+06 | | | Write cycles | 25°C, 3.3V, Page mode | 5 |
| Data retention | DRET | 100 | | | Years | | 5 |
## CAD (KiCad official)
- Symbol: `P24C32C-SSH-MIR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `p24c32c-ssh-mir-etched.step` / `p24c32c-ssh-mir-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `p24c32c-ssh-mir.step` / `p24c32c-ssh-mir.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [PUYA) datasheet](docs/p24c32c-ssh-mir-datasheet.pdf) (22 pp, sha256 `f5219b8dd0dfcb50`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/p24c32c-ssh-mir-datasheet.pdf)