Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

P24C32C-SSH-MIR

PUYA) · EEPROM · SOP-8

P24C32C-SSH-MIR from PUYA), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Slave address setting input (device address bit E0); internally pulled down to GND if left floating.
2 E1 input Slave address setting input (device address bit E1); internally pulled down to GND if left floating.
3 E2 input Slave address setting input (device address bit E2); internally pulled down to GND if left floating.
4 GND power_in Ground.
5 SDA bidirectional Serial data input/output; open-drain driven and may be wire-ORed with other open-drain or open-collector devices.
6 SCL input Serial clock input; positive edge clocks data in and negative edge clocks data out.
7 WCB input Write control input; connected to VCC inhibits all write operations, connected to GND (or floating, internally pulled down) allows normal writes.
8 VCC power_in Power supply, 1.7V to 5.5V for the -MI grade (MPN suffix MI).

Key specifications

Parameter Value
Manufacturer PUYA)
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (P24C32C-MI) VCC 1.7 5.5 V P24C32C-MI 4
Standby Current Isb 1 uA Vcc = 3.3V, TA = 85°C 4
Standby Current Isb 3 uA Vcc = 5.5V, TA = 85°C 4
Supply Current Read ICC1 0.2 0.4 mA Vcc=5.5V, Read at 400Khz 4
Supply Current Write ICC2 0.8 1.6 mA Vcc=5.5V, Write at 400Khz 4
Input Leakage Current ILI 0.1 1 µA VIN = VCC or GND 4
Output Leakage Current ILO 0.05 1 µA VOUT = VCC or GND 4
Input Low Level VIL -0.6 V max printed as 0.3VCC 4
Input High Level VIH 0.7 xVCC min printed as 0.7VCC; max printed as VCC+0.5 V 4
Output Low Level VCC = 1.7V (SDA) VOL1 0.2 V IOL = 1.5 mA 4
Output Low Level VCC = 3.0V (SDA) VOL2 0.4 V IOL = 2.1 mA 4
Input / Output Capacitance (SDA) CI/O 8 pF VI/O=GND; TA = 25°C, F = 1MHz, Vcc = 5.0V 4
Input Capacitance (E0,E1,E2,WCB,SCL) CIN 6 pF VIN=GND; TA = 25°C, F = 1MHz, Vcc = 5.0V 4
Storage Temperature -65 150 °C 4
Operation Temperature -40 125 °C 4
Maximum Operation Voltage 6.25 V 4
Voltage on Any Pin with Respect to Ground -1 V max printed as (Vcc+1.0) V 4
DC Output Current 5 mA 4
Clock Frequency, SCL fSCL 400 kHz 1.7≤VCC<2.5 5
Clock Frequency, SCL fSCL 1000 kHz 2.5≤VCC≤5.5 5
Clock Pulse Width Low tLOW 1.3 µs 1.7≤VCC<2.5 5
Clock Pulse Width Low tLOW 0.4 µs 2.5≤VCC≤5.5 5
Clock Pulse Width High tHIGH 0.6 µs 1.7≤VCC<2.5 5
Clock Pulse Width High tHIGH 0.4 µs 2.5≤VCC≤5.5 5
Clock Low to Data Out Valid tAA 0.05 0.9 µs 1.7≤VCC<2.5 5
Clock Low to Data Out Valid tAA 0.05 0.55 µs 2.5≤VCC≤5.5 5
Noise Suppression Time tI 0.1 µs 1.7≤VCC<2.5 5
Noise Suppression Time tI 0.05 µs 2.5≤VCC≤5.5 5
Bus Free Time before new transmission tBUF 1.3 µs 1.7≤VCC<2.5 5
Bus Free Time before new transmission tBUF 0.5 µs 2.5≤VCC≤5.5 5
Start Hold Time tHD.STA 0.6 µs 1.7≤VCC<2.5 5
Start Hold Time tHD.STA 0.25 µs 2.5≤VCC≤5.5 5
Start Setup Time tSU.STA 0.6 µs 1.7≤VCC<2.5 5
Start Setup Time tSU.STA 0.25 µs 2.5≤VCC≤5.5 5
Data In Hold Time tHD.DAT 0 µs 1.7≤VCC≤5.5 5
Data In Setup Time tSU.DAT 0.1 µs 1.7≤VCC≤5.5 5
Inputs Rise Time tR 0.3 µs 1.7≤VCC≤5.5; ensured by characterization 5
Inputs Fall Time tF 0.3 µs 1.7≤VCC<2.5; ensured by characterization 5
Inputs Fall Time tF 0.1 µs 2.5≤VCC≤5.5; ensured by characterization 5
Stop Setup Time tSU.STO 0.6 µs 1.7≤VCC<2.5 5
Stop Setup Time tSU.STO 0.25 µs 2.5≤VCC≤5.5 5
Data Out Hold Time tDH 0.05 µs 1.7≤VCC≤5.5 5
WCB pin Setup Time tSU.WCB 1.2 µs 1.7≤VCC<2.5 5
WCB pin Setup Time tSU.WCB 0.6 µs 2.5≤VCC≤5.5 5
WCB pin Hold Time tHD.WCB 1.2 µs 1.7≤VCC<2.5 5
WCB pin Hold Time tHD.WCB 0.6 µs 2.5≤VCC≤5.5 5
Write Cycle Time tWR 5 ms 1.7≤VCC≤5.5 5
Endurance EDR 1e+06 Write cycles 25°C, 3.3V, Page mode 5
Data retention DRET 100 Years 5

CAD (KiCad official)

  • Symbol: P24C32C-SSH-MIR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: p24c32c-ssh-mir-etched.step / p24c32c-ssh-mir-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); p24c32c-ssh-mir.step / p24c32c-ssh-mir.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PUYA) datasheet (22 pp, sha256 f5219b8dd0dfcb50, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF