main
Ray Publish 0.1.1 4835e78
{
  "slug": "p24c256b-ssh-mir",
  "version": "0.1.1",
  "type": "component",
  "description": "PUYA EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "p24c256b-ssh-mir"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "p24c256b-ssh-mir.kicad_sym",
    "p24c256b-ssh-mir.kicad_mod",
    "p24c256b-ssh-mir.glb",
    "p24c256b-ssh-mir.step",
    "p24c256b-ssh-mir.lbr",
    "docs/hero.png",
    "docs/p24c256b-ssh-mir-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "p24c256b-ssh-mir-etched.step",
    "p24c256b-ssh-mir-etched.glb"
  ],
  "visibility": "public",
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "P24C256B-SSH-MIR",
    "manufacturer": "PUYA",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "p24c256b-ssh-mir.kicad_sym",
      "footprint": "p24c256b-ssh-mir.kicad_mod",
      "model_3d": "p24c256b-ssh-mir-etched.glb",
      "model_3d_plain": "p24c256b-ssh-mir.glb",
      "model_3d_step": "p24c256b-ssh-mir-etched.step",
      "model_3d_step_plain": "p24c256b-ssh-mir.step",
      "lbr": "p24c256b-ssh-mir.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "E0",
        "type": "input",
        "description": "Device address input bit 0. Hardwired to VCC or VSS to set the chip's I2C slave address (combined with E1/E2 allows up to 8 devices on one bus). Internally pulled down to VSS when left floating."
      },
      {
        "number": "2",
        "name": "E1",
        "type": "input",
        "description": "Device address input bit 1. Hardwired to VCC or VSS to set the chip's I2C slave address (combined with E0/E2 allows up to 8 devices on one bus). Internally pulled down to VSS when left floating."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Device address input bit 2. Hardwired to VCC or VSS to set the chip's I2C slave address (combined with E0/E1 allows up to 8 devices on one bus). Internally pulled down to VSS when left floating."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference (0 V) for the device."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data input/output for the I2C bus. Open-drain output; requires an external pull-up resistor (typical 1.3 kΩ at 2.5-5.5V or 10 kΩ at 1.7V per AC characteristics)."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input for the I2C bus. Data is clocked in on the positive edge and out on the negative edge. Max clock 400 kHz (1.7-2.5V) or 1 MHz (2.5-5.5V)."
      },
      {
        "number": "7",
        "name": "WCB",
        "type": "input",
        "description": "Write Control (active low). Tie to VSS to allow normal write operations; tie to VCC to write-protect the entire memory array. Internally pulled down to VSS when left floating."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input. Operating range 1.7V to 5.5V (M grade); absolute maximum 6.25V. Typical read current 0.2 mA and write current 0.8 mA at 400 kHz."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C5263811",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:13:29Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "p24c256b-ssh-mir.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "p24c256b-ssh-mir-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6b25cf986bb4941955ce091579d8e6896dc8475b584a9c9fa0799a69b22fd8e6",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "org": "adom"
}