← Commit history
package.json+145−4@@ -1,6 +1,6 @@ { "slug": "p24c256b-ssh-mir",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "PUYA EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,147 @@ "docs/hero.png", "docs/p24c256b-ssh-mir-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "p24c256b-ssh-mir-etched.step",+ "p24c256b-ssh-mir-etched.glb"+ ],+ "component": {+ "mpn": "P24C256B-SSH-MIR",+ "manufacturer": "PUYA",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "EEPROM",+ "parts": {+ "symbol": "p24c256b-ssh-mir.kicad_sym",+ "footprint": "p24c256b-ssh-mir.kicad_mod",+ "model_3d": "p24c256b-ssh-mir-etched.glb",+ "model_3d_plain": "p24c256b-ssh-mir.glb",+ "model_3d_step": "p24c256b-ssh-mir-etched.step",+ "model_3d_step_plain": "p24c256b-ssh-mir.step",+ "lbr": "p24c256b-ssh-mir.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "E0",+ "type": "input",+ "description": "Device address input bit 0. Hardwired to VCC or VSS to set the chip's I2C slave address (combined with E1/E2 allows up to 8 devices on one bus). Internally pulled down to VSS when left floating."+ },+ {+ "number": "2",+ "name": "E1",+ "type": "input",+ "description": "Device address input bit 1. Hardwired to VCC or VSS to set the chip's I2C slave address (combined with E0/E2 allows up to 8 devices on one bus). Internally pulled down to VSS when left floating."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Device address input bit 2. Hardwired to VCC or VSS to set the chip's I2C slave address (combined with E0/E1 allows up to 8 devices on one bus). Internally pulled down to VSS when left floating."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data input/output for the I2C bus. Open-drain output; requires an external pull-up resistor (typical 1.3 kΩ at 2.5-5.5V or 10 kΩ at 1.7V per AC characteristics)."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input for the I2C bus. Data is clocked in on the positive edge and out on the negative edge. Max clock 400 kHz (1.7-2.5V) or 1 MHz (2.5-5.5V)."+ },+ {+ "number": "7",+ "name": "WCB",+ "type": "input",+ "description": "Write Control (active low). Tie to VSS to allow normal write operations; tie to VCC to write-protect the entire memory array. Internally pulled down to VSS when left floating."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage input. Operating range 1.7V to 5.5V (M grade); absolute maximum 6.25V. Typical read current 0.2 mA and write current 0.8 mA at 400 kHz."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C5263811",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:13:29Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "p24c256b-ssh-mir.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "p24c256b-ssh-mir-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6b25cf986bb4941955ce091579d8e6896dc8475b584a9c9fa0799a69b22fd8e6",+ "checked": "2026-11-03",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "p24c256b-ssh-mir",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "PUYA EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/p24c256b-ssh-mir-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "p24c256b-ssh-mir-etched.step"+ "p24c256b-ssh-mir-etched.step",+ "p24c256b-ssh-mir-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -170,5 +169,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}