main
Ray Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") a23a771
{
  "schema_version": 1,
  "type": "component",
  "slug": "p24c128d-ssh-mir",
  "title": "P24C128D-SSH-MIR",
  "brief": "PUYA EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "p24c128d-ssh-mir"
  ],
  "component": {
    "mpn": "P24C128D-SSH-MIR",
    "manufacturer": "PUYA",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2203231830_PUYA--P24C128D-SSH-MIR_C2925576.pdf",
    "parts": {
      "symbol": "p24c128d-ssh-mir.kicad_sym",
      "footprint": "p24c128d-ssh-mir.kicad_mod",
      "model_3d": "p24c128d-ssh-mir.glb",
      "model_3d_step": "p24c128d-ssh-mir.step",
      "lbr": "p24c128d-ssh-mir.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "E0",
        "type": "input",
        "description": "Device slave-address setting bit 0. Hardwire to VCC or GND to set A0 of the 7-bit I2C slave address (allows up to 8 devices on one bus). If left floating, an internal pull-down forces this bit to 0."
      },
      {
        "number": "2",
        "name": "E1",
        "type": "input",
        "description": "Device slave-address setting bit 1. Hardwire to VCC or GND to set A1 of the 7-bit I2C slave address. If left floating, an internal pull-down forces this bit to 0."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Device slave-address setting bit 2. Hardwire to VCC or GND to set A2 of the 7-bit I2C slave address. If left floating, an internal pull-down forces this bit to 0."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device (0 V)."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data input/output. Open-drain, requires an external pull-up to VCC; can be wire-OR'd with other open-drain devices. Schmitt-triggered noise-suppressed input; output VOL <= 0.2 V at IOL = 1.5 mA (VCC = 1.7 V)."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input. Data is clocked in on the rising edge and clocked out on the falling edge. Supports up to 400 kHz below VCC = 2.5 V and up to 1 MHz from 2.5 V to 5.5 V."
      },
      {
        "number": "7",
        "name": "WCB",
        "type": "input",
        "description": "Write control (active-low enable). Tie to GND to allow normal writes; tie to VCC to inhibit all writes to the memory array. Internally pulled down (5 M-ohm typ., 30 k-ohm max) so a floating pin defaults to write-enabled."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input. -MI grade: 1.7 V to 5.5 V, -40 C to +85 C. Standby current <= 1.0 uA (VCC = 3.3 V, 85 C); read current <= 400 uA; write current <= 1.6 mA."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2203231830_PUYA--P24C128D-SSH-MIR_C2925576.pdf",
        "pages": 25,
        "sha256": "4e7c982781c7caea",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "PUYA",
      "Package": "SOP-8",
      "Category": "Memory",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "P24C128D-SSH-MIR",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "p24c128d-ssh-mir"
  ],
  "discovery_pitch": "P24C128D-SSH-MIR (PUYA) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "p24c128d-ssh-mir.kicad_sym",
    "p24c128d-ssh-mir.kicad_mod",
    "p24c128d-ssh-mir.glb",
    "p24c128d-ssh-mir.step",
    "p24c128d-ssh-mir.lbr",
    "docs/hero.png",
    "docs/p24c128d-ssh-mir-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T04:02:22.233Z"
}