main
Ray
Publish 0.1.1
a6b2928
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173
{
"slug": "p24c08c-ssh-mir",
"version": "0.1.1",
"type": "component",
"description": "PUYA EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"p24c08c-ssh-mir"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"p24c08c-ssh-mir.kicad_sym",
"p24c08c-ssh-mir.kicad_mod",
"p24c08c-ssh-mir.glb",
"p24c08c-ssh-mir.step",
"p24c08c-ssh-mir.lbr",
"docs/hero.png",
"docs/p24c08c-ssh-mir-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"p24c08c-ssh-mir-etched.step",
"p24c08c-ssh-mir-etched.glb"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "P24C08C-SSH-MIR",
"manufacturer": "PUYA",
"package": "SOP-8",
"pin_count": 8,
"category": "EEPROM",
"parts": {
"symbol": "p24c08c-ssh-mir.kicad_sym",
"footprint": "p24c08c-ssh-mir.kicad_mod",
"model_3d": "p24c08c-ssh-mir-etched.glb",
"model_3d_plain": "p24c08c-ssh-mir.glb",
"model_3d_step": "p24c08c-ssh-mir-etched.step",
"model_3d_step_plain": "p24c08c-ssh-mir.step",
"lbr": "p24c08c-ssh-mir.lbr"
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No connect on P24C08C. Pin 1 is only used for the device address input E0 on the P24C02C variant; on P24C08C it is unbonded/internal-no-connect. Leave floating or tie to GND."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "No connect on P24C08C. Pin 2 is used as slave-address input E1 only on P24C02C and P24C04C; on P24C08C it is unbonded/internal-no-connect. Leave floating or tie to GND."
},
{
"number": "3",
"name": "E2",
"type": "input",
"description": "Device address input bit 2. Hardwired address selector used to distinguish devices on the same I2C bus; must match address bit A10 of the slave address. Internally pulled down to GND, so a floating pin selects address 0. Input capacitance 6 pF max."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground reference (0 V) for the device. Connect to the system ground plane; typically decoupled together with VCC using a 0.1 µF ceramic capacitor placed close to the package."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "I2C bidirectional serial data line. Open-drain output that can be wire-ORed with other open-drain/collector devices on the bus; requires an external pull-up resistor to VCC (typ. 1.3 kΩ at 2.5-5.5 V, 10 kΩ at 1.7 V per Table 3-3). VOL ≤ 0.4 V @ IOL = 2.1 mA (VCC = 3 V). Input capacitance 8 pF max."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "I2C serial clock input. Positive edge clocks data into the device; negative edge clocks data out. Maximum clock frequency 1 MHz (VCC ≥ 2.5 V) or 400 kHz (1.7 V ≤ VCC < 2.5 V). Schmitt-trigger, filtered input; input capacitance 6 pF max."
},
{
"number": "7",
"name": "WCB",
"type": "input",
"description": "Write control (active-low). Tie to GND (or leave floating; internally pulled down to GND) to enable normal write operations. Drive high / tie to VCC to hardware-inhibit all writes to the memory array. Setup/hold times 0.6 µs (VCC ≥ 2.5 V) or 1.2 µs (< 2.5 V)."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Positive supply input. Operating range 1.7 V to 5.5 V for the -MI grade (this MPN). Read supply current 0.4 mA max @ 400 kHz; write supply current 1.6 mA max @ 400 kHz; standby 1 µA typ at 3.3 V/85 °C. Decouple with 0.1 µF close to the pin."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:13:26Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "p24c08c-ssh-mir.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "p24c08c-ssh-mir-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "688661b02fa10f1c652e415d41bc51a63f5c2e53bed91607466b02daa2f6fa7e",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"org": "adom"
}