← Commit history
package.json+144−4@@ -1,6 +1,6 @@ { "slug": "p24c08c-ssh-mir",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "PUYA EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,146 @@ "docs/hero.png", "docs/p24c08c-ssh-mir-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "p24c08c-ssh-mir-etched.step",+ "p24c08c-ssh-mir-etched.glb"+ ],+ "component": {+ "mpn": "P24C08C-SSH-MIR",+ "manufacturer": "PUYA",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "EEPROM",+ "parts": {+ "symbol": "p24c08c-ssh-mir.kicad_sym",+ "footprint": "p24c08c-ssh-mir.kicad_mod",+ "model_3d": "p24c08c-ssh-mir-etched.glb",+ "model_3d_plain": "p24c08c-ssh-mir.glb",+ "model_3d_step": "p24c08c-ssh-mir-etched.step",+ "model_3d_step_plain": "p24c08c-ssh-mir.step",+ "lbr": "p24c08c-ssh-mir.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect on P24C08C. Pin 1 is only used for the device address input E0 on the P24C02C variant; on P24C08C it is unbonded/internal-no-connect. Leave floating or tie to GND."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect on P24C08C. Pin 2 is used as slave-address input E1 only on P24C02C and P24C04C; on P24C08C it is unbonded/internal-no-connect. Leave floating or tie to GND."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Device address input bit 2. Hardwired address selector used to distinguish devices on the same I2C bus; must match address bit A10 of the slave address. Internally pulled down to GND, so a floating pin selects address 0. Input capacitance 6 pF max."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device. Connect to the system ground plane; typically decoupled together with VCC using a 0.1 µF ceramic capacitor placed close to the package."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C bidirectional serial data line. Open-drain output that can be wire-ORed with other open-drain/collector devices on the bus; requires an external pull-up resistor to VCC (typ. 1.3 kΩ at 2.5-5.5 V, 10 kΩ at 1.7 V per Table 3-3). VOL ≤ 0.4 V @ IOL = 2.1 mA (VCC = 3 V). Input capacitance 8 pF max."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input. Positive edge clocks data into the device; negative edge clocks data out. Maximum clock frequency 1 MHz (VCC ≥ 2.5 V) or 400 kHz (1.7 V ≤ VCC < 2.5 V). Schmitt-trigger, filtered input; input capacitance 6 pF max."+ },+ {+ "number": "7",+ "name": "WCB",+ "type": "input",+ "description": "Write control (active-low). Tie to GND (or leave floating; internally pulled down to GND) to enable normal write operations. Drive high / tie to VCC to hardware-inhibit all writes to the memory array. Setup/hold times 0.6 µs (VCC ≥ 2.5 V) or 1.2 µs (< 2.5 V)."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply input. Operating range 1.7 V to 5.5 V for the -MI grade (this MPN). Read supply current 0.4 mA max @ 400 kHz; write supply current 1.6 mA max @ 400 kHz; standby 1 µA typ at 3.3 V/85 °C. Decouple with 0.1 µF close to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:13:26Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "p24c08c-ssh-mir.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "p24c08c-ssh-mir-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "688661b02fa10f1c652e415d41bc51a63f5c2e53bed91607466b02daa2f6fa7e",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "p24c08c-ssh-mir",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "PUYA EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/p24c08c-ssh-mir-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "p24c08c-ssh-mir-etched.step"+ "p24c08c-ssh-mir-etched.step",+ "p24c08c-ssh-mir-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -169,5 +168,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}