main
Ray Publish 0.1.1 a6b2928
{
  "slug": "p24c08c-ssh-mir",
  "version": "0.1.1",
  "type": "component",
  "description": "PUYA EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "p24c08c-ssh-mir"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "p24c08c-ssh-mir.kicad_sym",
    "p24c08c-ssh-mir.kicad_mod",
    "p24c08c-ssh-mir.glb",
    "p24c08c-ssh-mir.step",
    "p24c08c-ssh-mir.lbr",
    "docs/hero.png",
    "docs/p24c08c-ssh-mir-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "p24c08c-ssh-mir-etched.step",
    "p24c08c-ssh-mir-etched.glb"
  ],
  "component": {
    "mpn": "P24C08C-SSH-MIR",
    "manufacturer": "PUYA",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "EEPROM",
    "parts": {
      "symbol": "p24c08c-ssh-mir.kicad_sym",
      "footprint": "p24c08c-ssh-mir.kicad_mod",
      "model_3d": "p24c08c-ssh-mir-etched.glb",
      "model_3d_plain": "p24c08c-ssh-mir.glb",
      "model_3d_step": "p24c08c-ssh-mir-etched.step",
      "model_3d_step_plain": "p24c08c-ssh-mir.step",
      "lbr": "p24c08c-ssh-mir.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect on P24C08C. Pin 1 is only used for the device address input E0 on the P24C02C variant; on P24C08C it is unbonded/internal-no-connect. Leave floating or tie to GND."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect on P24C08C. Pin 2 is used as slave-address input E1 only on P24C02C and P24C04C; on P24C08C it is unbonded/internal-no-connect. Leave floating or tie to GND."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Device address input bit 2. Hardwired address selector used to distinguish devices on the same I2C bus; must match address bit A10 of the slave address. Internally pulled down to GND, so a floating pin selects address 0. Input capacitance 6 pF max."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) for the device. Connect to the system ground plane; typically decoupled together with VCC using a 0.1 µF ceramic capacitor placed close to the package."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C bidirectional serial data line. Open-drain output that can be wire-ORed with other open-drain/collector devices on the bus; requires an external pull-up resistor to VCC (typ. 1.3 kΩ at 2.5-5.5 V, 10 kΩ at 1.7 V per Table 3-3). VOL ≤ 0.4 V @ IOL = 2.1 mA (VCC = 3 V). Input capacitance 8 pF max."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input. Positive edge clocks data into the device; negative edge clocks data out. Maximum clock frequency 1 MHz (VCC ≥ 2.5 V) or 400 kHz (1.7 V ≤ VCC < 2.5 V). Schmitt-trigger, filtered input; input capacitance 6 pF max."
      },
      {
        "number": "7",
        "name": "WCB",
        "type": "input",
        "description": "Write control (active-low). Tie to GND (or leave floating; internally pulled down to GND) to enable normal write operations. Drive high / tie to VCC to hardware-inhibit all writes to the memory array. Setup/hold times 0.6 µs (VCC ≥ 2.5 V) or 1.2 µs (< 2.5 V)."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input. Operating range 1.7 V to 5.5 V for the -MI grade (this MPN). Read supply current 0.4 mA max @ 400 kHz; write supply current 1.6 mA max @ 400 kHz; standby 1 µA typ at 3.3 V/85 °C. Decouple with 0.1 µF close to the pin."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:13:26Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "p24c08c-ssh-mir.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "p24c08c-ssh-mir-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "688661b02fa10f1c652e415d41bc51a63f5c2e53bed91607466b02daa2f6fa7e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}