main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs opa727aidrbt: one-pass backfill (re-etched) · Ray
viewers opa727aidrbt: viewers · Ray
opa727aidrbt-etched.fit.json opa727aidrbt: one-pass backfill (re-etched) · Ray
opa727aidrbt-etched.glb opa727aidrbt: one-pass backfill (re-etched) · Ray
opa727aidrbt-etched.step opa727aidrbt: one-pass backfill (re-etched) · Ray
opa727aidrbt-hero.glb opa727aidrbt: one-pass backfill (re-etched) · Ray
opa727aidrbt-hero.overlay.json opa727aidrbt: one-pass backfill (re-etched) · Ray
opa727aidrbt.glb Publish 0.1.0 · Ray
opa727aidrbt.kicad_mod Publish 0.1.0 · Ray
opa727aidrbt.kicad_sym Publish 0.1.0 · Ray
opa727aidrbt.lbr Publish 0.1.0 · Ray
opa727aidrbt.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md opa727aidrbt: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray

OPA727AIDRBT

Texas Instruments · Precision Op Amps · SON-8-EP(3x3)

OPA727AIDRBT from Texas Instruments, in a SON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection.
2 -IN input Inverting input of the amplifier; input terminals are diode-clamped to the supply rails and signals more than 0.5V beyond the rails should be current limited to 10mA or less.
3 +IN input Non-inverting input of the amplifier; input common-mode range extends from V- to (V+) - 2.5V and signals more than 0.5V beyond the rails should be current limited to 10mA or less.
4 V- power_in Negative supply (or ground in single-supply operation); the exposed thermal die pad must also be connected to V-.
5 NC unconnected No internal connection.
6 OUT output Amplifier output with rail-to-rail swing, within 150mV of the rails for light loads (>100kΩ) and within 250mV with 1kΩ loads.
7 V+ power_in Positive supply, specified for 4V to 12V total supply (absolute maximum 13.2V) and to be bypassed with 1nF ceramic in parallel with 1µF tantalum capacitors.
8 NC unconnected No internal connection.
9 EP power_in Exposed thermal die pad on underside, to be connected to V- and soldered to the PCB thermal pad.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SON-8-EP(3x3)
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (DFN package) VOS 15 150 µV VS = ±5V, VCM = 0V; OPA727 DFN package 4
Offset Voltage Drift 0°C to +85°C dVOS/dT 0.3 1.5 µV/°C 0°C to +85°C 4
Offset Voltage Drift –40°C to +125°C dVOS/dT 0.6 3 µV/°C –40°C to +125°C 4
Power Supply Rejection (offset vs supply) PSRR 30 150 µV/V VS = ±2V to ±6V, VCM = V– 4
Power Supply Rejection over temperature PSRR 150 µV/V Over temperature; VS = ±2V to ±6V, VCM = V– 4
Input Bias Current IB -500 85 500 pA 4
Input Offset Current IOS -100 10 100 pA 4
Common-Mode Rejection Ratio CMRR 86 94 dB (V–) ≤ VCM ≤ (V+) – 2.5V 4
Common-Mode Rejection Ratio over temperature CMRR 84 dB Over temperature; (V–) ≤ VCM ≤ (V+) – 2.5V 4
Common-Mode Rejection Ratio CMRR 94 100 dB (V–) ≤ VCM ≤ (V+) – 3V 4
Open-Loop Voltage Gain AOL 110 120 dB RL = 100kΩ, 0.15V < VO < (V+) – 0.15V 4
Open-Loop Voltage Gain over temperature AOL 100 dB Over temperature; RL = 100kΩ, 0.15V < VO < (V+) – 0.15V 4
Open-Loop Voltage Gain AOL 106 116 dB RL = 1kΩ, 0.25V < VO < (V+) – 0.25V 4
Open-Loop Voltage Gain over temperature (OPA727, OPA728) AOL 96 dB Over temperature; RL = 1kΩ, 0.25V < VO < (V+) – 0.25V 4
Voltage Output Swing from Rail 100 150 mV RL = 100kΩ, AOL > 110dB 5
Voltage Output Swing from Rail over temperature 150 mV Over temperature; RL = 100kΩ, AOL > 100dB 5
Voltage Output Swing from Rail 200 250 mV RL = 1kΩ, AOL > 106dB 5
Voltage Output Swing from Rail over temperature (OPA727, OPA728) 250 mV Over temperature; RL = 1kΩ, AOL > 96dB 5
Short-Circuit Current ISC -55 55 mA 5
Specified Voltage Range VS 4 12 V 5
Operating Voltage Range VS 3.5 13.2 V 5
Quiescent Current (per amplifier) IQ 4.3 6.5 mA 5
Quiescent Current (per amplifier) over temperature IQ 6.5 mA Over temperature 5
Specified Temperature Range -40 125 °C 5
Operating Temperature Range -55 125 °C 5
Storage Temperature Range -55 150 °C 5
Thermal Resistance, junction-to-ambient (DFN-8) θJA 46 °C/W DFN-8 package 5
Supply Voltage 13.2 V 2
Signal Input Terminals Voltage -0.5 V Printed as –0.5 to (V+) + 0.5 V; upper limit is not a fixed number 2
Signal Input Terminals Current -10 10 mA Signal input terminals; ±10 mA 2
Operating Temperature (absolute maximum) -55 125 °C 2
Junction Temperature 150 °C 2
Storage Temperature (absolute maximum) -55 150 °C 2
ESD Rating, Human Body Model 2000 V Human body model 2
ESD Rating, Charged Device Model 1000 V Charged device model 2

CAD (KiCad official)

  • Symbol: OPA727AIDRBT
  • Footprint: Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm
  • 3D model: SON-8-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: opa727aidrbt-etched.step / opa727aidrbt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa727aidrbt.step / opa727aidrbt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 dc46e8679e214df3, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF