main
Ray Publish 0.1.0 cb5add2
{
  "slug": "opa699idr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "operational amplifier-comparator",
    "opa699idr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "opa699idr.kicad_sym",
    "opa699idr.kicad_mod",
    "opa699idr.glb",
    "opa699idr.step",
    "opa699idr.lbr",
    "docs/hero.png",
    "docs/opa699idr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "opa699idr-hero.glb",
    "opa699idr-hero.overlay.json",
    "opa699idr-etched.glb"
  ],
  "component": {
    "mpn": "OPA699IDR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Operational Amplifier/Comparator",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://www.ti.com/lit/ds/symlink/opa699.pdf",
    "parts": {
      "symbol": "opa699idr.kicad_sym",
      "footprint": "opa699idr.kicad_mod",
      "model_3d": "opa699idr-hero.glb",
      "model_3d_plain": "opa699idr-etched.glb",
      "model_3d_step": "opa699idr-etched.step",
      "model_3d_step_plain": "opa699idr.step",
      "lbr": "opa699idr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2059943",
      "digikey": "OPA699IDR-ND",
      "mouser": "595-OPA699IDR"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T08:29:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "OPA699IDR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-OPA699IDR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connection pin; the datasheet marks it as NC = No Connection."
      },
      {
        "number": "2",
        "name": "Inverting Input",
        "type": "input",
        "description": "Inverting input of the voltage-feedback op amp, with a common-mode input range of ±3.3V typ at ±5V supplies (±3.2V min at +25°C)."
      },
      {
        "number": "3",
        "name": "Noninverting Input",
        "type": "input",
        "description": "Noninverting input of the op amp, sharing the same common-mode input range of ±3.3V typ at ±5V supplies, and carrying about 3µA typical input bias current."
      },
      {
        "number": "4",
        "name": "–VS",
        "type": "power_in",
        "description": "Negative power supply; the device is specified for ±5V operation with a maximum total supply of 12V (±6V maximum per the electrical table)."
      },
      {
        "number": "5",
        "name": "VL",
        "type": "input",
        "description": "Lower output limiter input that sets the minimum output voltage; if left open it defaults to -3.5V typ at ±5V, it must stay at least 0.7V above -VS, and it must be at least 400mV below VH."
      },
      {
        "number": "6",
        "name": "Output",
        "type": "output",
        "description": "Op amp output, which swings to ±4.1V min at +25°C for RL ≥ 500Ω at ±5V and sources or sinks ±120mA min at +25°C; the limiters clamp it between VL and VH."
      },
      {
        "number": "7",
        "name": "+VS",
        "type": "power_in",
        "description": "Positive power supply; the device is specified for ±5V or single +5V operation, with a maximum total supply of 12V (+12V max per the electrical table)."
      },
      {
        "number": "8",
        "name": "VH",
        "type": "input",
        "description": "Upper output limiter input that sets the maximum output voltage; if left open it defaults to +3.5V typ at ±5V, it must stay at least 0.7V below +VS, and it must be at least 400mV above VL."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers were mapped from the text-extracted PIN CONFIGURATION listing (names listed in order, nu; Supply-voltage wording in pins 4 and 7 combines the Absolute Maximum Ratings (±6.5V supply) with the; Limiter and output descriptions give electrical limits at ±5V (for example the ±4.1V output swing an"
        ],
        "pages_sent": 33,
        "cost_usd": 0.1609,
        "at": "2026-11-11T08:29:43"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/opa699.pdf",
        "pages": 33,
        "sha256": "809ef2c8504a3229",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "opa699idr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "opa699idr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0038b290b179b712b48e1b6960a7623e0783c6539bb64f7e7f44bb48db689f99",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}