Generated by kicad-footprint-generator · KiCad file format 20260206
OPA699IDR
Texas Instruments · Operational Amplifier · SOIC-8
OPA699IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No-connection pin; the datasheet marks it as NC = No Connection. |
| 2 | Inverting Input | input | Inverting input of the voltage-feedback op amp, with a common-mode input range of ±3.3V typ at ±5V supplies (±3.2V min at +25°C). |
| 3 | Noninverting Input | input | Noninverting input of the op amp, sharing the same common-mode input range of ±3.3V typ at ±5V supplies, and carrying about 3µA typical input bias current. |
| 4 | -VS | power_in | Negative power supply; the device is specified for ±5V operation with a maximum total supply of 12V (±6V maximum per the electrical table). |
| 5 | VL | input | Lower output limiter input that sets the minimum output voltage; if left open it defaults to -3.5V typ at ±5V, it must stay at least 0.7V above -VS, and it must be at least 400mV below VH. |
| 6 | Output | output | Op amp output, which swings to ±4.1V min at +25°C for RL ≥ 500Ω at ±5V and sources or sinks ±120mA min at +25°C; the limiters clamp it between VL and VH. |
| 7 | +VS | power_in | Positive power supply; the device is specified for ±5V or single +5V operation, with a maximum total supply of 12V (+12V max per the electrical table). |
| 8 | VH | input | Upper output limiter input that sets the maximum output voltage; if left open it defaults to +3.5V typ at ±5V, it must stay at least 0.7V below +VS, and it must be at least 400mV above VL. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Small Signal Bandwidth (VO < 0.5VPP), G = +6 | 220 | 260 | MHz | VS = ±5V; G = +6, VO < 0.5VPP | 3 | ||
| Gain Bandwidth Product (G ≥ +20) | 820 | 1000 | MHz | VS = ±5V; G ≥ +20, VO < 0.5VPP, G = +6 | 3 | ||
| Large-Signal Bandwidth | 190 | 290 | MHz | VS = ±5V; VO = 4VPP | 3 | ||
| Slew Rate | 1300 | 1400 | V/µs | VS = ±5V; 4V step | 3 | ||
| Rise-and-Fall Time | 1.6 | 1.65 | ns | VS = ±5V; 0.5V step | 3 | ||
| Spurious-Free Dynamic Range, Even | 64 | 67 | dB | VS = ±5V; f = 5MHz, VO = 2VPP | 3 | ||
| Spurious-Free Dynamic Range, Odd | 85 | 87 | dB | VS = ±5V; f = 5MHz, VO = 2VPP | 3 | ||
| Input Voltage Noise Density | 4.1 | 4.6 | nV/√Hz | VS = ±5V; f ≥ 1MHz | 3 | ||
| Input Current Noise Density | 2 | 2.5 | pA/√Hz | VS = ±5V; f ≥ 1MHz | 3 | ||
| Open-Loop Voltage Gain (AOL) | AOL | 58 | 66 | dB | VS = ±5V; VO = ±0.5V | 3 | |
| Input Offset Voltage | VOS | -5 | 1.5 | 5 | mV | VS = ±5V; VCM = 0V | 3 |
| Input Offset Voltage Average Drift | -15 | 15 | µV/°C | VS = ±5V; printed TYP column blank, first printed value used | 3 | ||
| Input Bias Current | IB | -10 | 3 | 10 | µA | VS = ±5V; VCM = 0V | 3 |
| Input Bias Current Average Drift | -15 | 15 | nA/°C | VS = ±5V; printed TYP column blank, first printed value used | 3 | ||
| Input Offset Current | IOS | -2 | 0.3 | 2 | µA | VS = ±5V; VCM = 0V | 3 |
| Input Offset Current Average Drift | -10 | 10 | nA/°C | VS = ±5V; printed TYP column blank, first printed value used | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 55 | 61 | dB | VS = ±5V; input referred, VCM = ±0.5V | 3 | |
| Common-Mode Input Range | VCM | 3.2 | 3.3 | V | VS = ±5V; CMIR tested at < 3dB CMRR degradation | 3 | |
| Output Voltage Range | VO | 3.9 | 4.1 | V | VS = ±5V; VH = -VL = 4.3V; RL ≥ 500Ω | 3 | |
| Output Current, Sourcing | IO | 90 | 120 | mA | VS = ±5V; VH = -VL = 4.3V | 3 | |
| Output Current, Sinking | IO | -90 | -120 | mA | VS = ±5V; VH = -VL = 4.3V | 3 | |
| Maximum Operating Voltage | VS | 6 | V | VS = ±5V section | 3 | ||
| Quiescent Current, Maximum | IQ | 15.5 | 15.9 | mA | VS = ±5V | 3 | |
| Quiescent Current, Minimum | IQ | 15.2 | 15.5 | mA | VS = ±5V | 3 | |
| Power-Supply Rejection Ratio, +PSRR (Input Referred) | PSRR | 68 | 75 | dB | +VS = 4.5V to 5.5V | 3 | |
| Default Limit Voltage, Upper Limiter | VH | 3.3 | 3.5 | V | VS = ±5V; limiter pins open | 4 | |
| Default Limit Voltage, Lower Limiter | VL | -3.5 | -3.3 | V | VS = ±5V; limiter pins open | 4 | |
| Minimum Limiter Separation (VH, VL) | VH-VL | 400 | 400 | mV | VS = ±5V | 4 | |
| Maximum Limit Voltage | -4.3 | 4.3 | V | VS = ±5V | 4 | ||
| Limiter Input Bias Current Magnitude, Maximum | IVH, IVL | 50 | 60 | µA | VS = ±5V; VO = 0 | 4 | |
| Limiter Input Bias Current Magnitude, Minimum | IVH, IVL | 40 | 50 | µA | VS = ±5V; VO = 0 | 4 | |
| Limiter Input Bias Current Average Drift | 30 | nA/°C | VS = ±5V; printed TYP column blank, first printed value used | 4 | |||
| Limiter Offset Voltage (VO, VH) or (VO, VL) | -30 | 10 | 30 | mV | VS = ±5V; VIN = ±0.7V | 4 | |
| Limited Step Response Recovery Time | 1.9 | 2 | ns | VS = ±5V; VIN = ±0.7V to 0V step | 4 | ||
| Supply Voltage (absolute maximum) | VS | 6.5 | V | Supply voltage ±6.5V | 2 | ||
| Storage Temperature Range, D | TSTG | -65 | 125 | °C | Package D | 2 | |
| Lead Temperature (soldering, 3s) | 260 | °C | SO-8, soldering, 3s | 2 | |||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| ESD Resistance, HBM | 2000 | V | Human body model | 2 | |||
| ESD Resistance, MM | 200 | V | Machine model | 2 | |||
| ESD Resistance, CDM | 1000 | V | Charged device model | 2 | |||
| Temperature Range Specification, I | -40 | 85 | °C | Grade I (OPA699ID) | 4 | ||
| Small Signal Bandwidth (VO < 0.5VPP), G = +6 | 200 | 234 | MHz | VS = +5V; G = +6, VO < 0.5VPP | 5 | ||
| Slew Rate | 850 | 1050 | V/µs | VS = +5V; 2V step | 5 | ||
| Open-Loop Voltage Gain (AOL) | AOL | 56 | 66 | dB | VS = +5V; VO = VCM ± 0.5V | 5 | |
| Input Offset Voltage | VOS | -6 | 2 | 6 | mV | VS = +5V | 5 |
| Input Bias Current | IB | -10 | 3 | 10 | µA | VS = +5V | 5 |
| Input Offset Current | IOS | -2 | 0.4 | 2 | µA | VS = +5V | 5 |
| Common-Mode Rejection Ratio | CMRR | 54 | 58 | dB | VS = +5V; input referred, VCM ±0.5V | 5 | |
| Output Current, Sourcing | IO | 60 | 70 | mA | VS = +5V; VH = VCM + 1.8V, VL = VCM, 1.8V | 5 | |
| Output Current, Sinking | IO | -60 | -70 | mA | VS = +5V; VH = VCM + 1.8V, VL = VCM, 1.8V | 5 | |
| Maximum Operating Voltage | VS | 12 | V | VS = +5V section | 5 | ||
| Quiescent Current, Maximum | IQ | 14.3 | 14.9 | mA | VS = +5V | 5 | |
| Quiescent Current, Minimum | IQ | 13.6 | 14.3 | mA | VS = +5V | 5 | |
| Operating Voltage, Specified | VS | 5 | V | VS = ±5V (typ.; table prints ±5 V) | 3 | ||
| Thermal Resistance Junction-to-Ambient, D SO-8 | θJA | 125 | °C/W | Package D (SO-8) | 4 |
CAD (KiCad official)
- Symbol:
OPA699IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa699idr-etched.step/opa699idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa699idr.step/opa699idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
809ef2c8504a3229, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).