main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers opa692idbvr: viewers rendered from the public page · Ray
opa692idbvr-etched.glb Publish 0.1.0 · Ray
opa692idbvr-etched.step opa692idbvr: factory component page (tier=mfr) · Ray
opa692idbvr-hero.glb opa692idbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
opa692idbvr-hero.overlay.json Publish 0.1.0 · Ray
opa692idbvr.glb Publish 0.1.0 · Ray
opa692idbvr.kicad_mod Publish 0.1.0 · Ray
opa692idbvr.kicad_sym Publish 0.1.0 · Ray
opa692idbvr.lbr Publish 0.1.0 · Ray
opa692idbvr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

OPA692IDBVR

Texas Instruments · Video Amplifiers · SOT-23-6

OPA692IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output output Amplifier output, delivering ±190mA typical (±160mA min at +25°C) with ±4.0V no-load swing on ±5V supplies; goes high-impedance when DIS is pulled LOW.
2 -VS power_in Negative supply pin (ground for single-supply use); absolute maximum total supply ±6.5V, operating range ±2.5V to ±6V dual.
3 +IN input Noninverting input with 100kΩ
4 -IN input Inverting input tied to internal 402Ω RF/RG network; ground for gain +2, leave open for gain +1, or drive with signal (with +IN grounded) for gain -1.
5 DIS input Disable control: leave open or hold HIGH (enable voltage 3.5V min at +25°C) for normal operation, pull LOW (disable voltage 1.7V max) to cut supply current to under 150µA and put I/O pins in high-impedance state.
6 +VS power_in Positive supply pin; operating range +5V to +12V single supply, ±6V max dual, and should be decoupled with 0.1µF capacitor close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Small-Signal Bandwidth 185 225 MHz VS = ±5V; G = +2; VO < 0.5VPP 3
Bandwidth for 0.1dB Gain Flatness 40 120 MHz VS = ±5V; G = +2, VO < 0.5VPP 3
Peaking at a Gain of +1 0.2 1 dB VS = ±5V; VO < 0.5VPP 3
Slew Rate 1400 2000 V/µs VS = ±5V; G = +2, 4V Step 3
Gain Error -1.5 0.3 1.5 % VS = ±5V; G = +2 3
Gain Error -1.5 0.2 1.5 % VS = ±5V; G = -1 3
Internal RF and RG Maximum 402 457 Ω VS = ±5V 3
Internal RF and RG Minimum 347 402 Ω VS = ±5V 3
Internal RF and RG Average Drift 0.13 0.13 %/C° VS = ±5V 3
Input Offset Voltage -2.5 0.5 2.5 mV VS = ±5V; VCM = 0V 3
Noninverting Input Bias Current 15 35 µA VS = ±5V; VCM = 0V 3
Inverting Input Bias Current -25 5 25 µA VS = ±5V; VCM = 0V 3
Common-Mode Input Range -3.4 3.5 V VS = ±5V 3
Voltage Output Swing -3.8 4 V VS = ±5V; No Load 3
Voltage Output Swing -3.7 3.9 V VS = ±5V; 100Ω Load 3
Current Output, Sourcing 160 190 mA VS = ±5V 3
Current Output, Sinking -160 -190 mA VS = ±5V 3
Power-Down Supply Current (+VS) -150 -300 µA VS = ±5V; VDIS = 0 4
Enable Voltage 3.5 3.3 V VS = ±5V 4
Disable Voltage 1.8 1.7 V VS = ±5V 4
Control Pin Input Bias Current 75 130 µA VS = ±5V; VDIS = 0 4
Maximum Operating Voltage Range -6 6 V 4
Maximum Quiescent Current 5.1 5.3 mA VS = ±5V 4
Minimum Quiescent Current 4.9 5.1 mA VS = ±5V 4
Power-Supply Rejection Ratio (-PSRR) 52 58 dB VS = ±5V; Input Referred 4
Small-Signal Bandwidth 168 190 MHz VS = +5V; G = +2, VO < 0.5VPP 5
Bandwidth for 0.1dB Gain Flatness 40 90 MHz VS = +5V; G = +2, VO < 0.5VPP 5
Peaking at a Gain of +1 0.2 1 dB VS = +5V; VO < 0.5VPP 5
Slew Rate 600 830 V/µs VS = +5V; G = +2, 2V Step 5
Gain Error -1.5 0.3 1.5 % VS = +5V; G = +2 5
Gain Error -1.5 0.2 1.5 % VS = +5V; G = -1 5
Internal RF and RG Maximum 402 457 Ω VS = +5V 5
Internal RF and RG Minimum 347 402 Ω VS = +5V 5
Internal RF and RG Average Drift 0.13 0.13 %/C° VS = +5V 5
Input Offset Voltage -3 0.5 3 mV VS = +5V; VCM = 2.5V 5
Noninverting Input Bias Current 20 40 µA VS = +5V; VCM = 2.5V 5
Inverting Input Bias Current -25 5 25 µA VS = +5V; VCM = 2.5V 5
Least Positive Input Voltage 1.5 1.6 V VS = +5V 5
Most Positive Input Voltage 3.4 3.5 V VS = +5V 5
Most Positive Output Voltage 3.8 4 V VS = +5V; No Load 5
Most Positive Output Voltage 3.7 3.9 V VS = +5V; RL = 100Ω 5
Least Positive Output Voltage 1 1.2 V VS = +5V; No Load 5
Least Positive Output Voltage 1.1 1.3 V VS = +5V; RL = 100Ω 5
Current Output, Sourcing 120 160 mA VS = +5V 5
Current Output, Sinking -120 -160 mA VS = +5V 5
Maximum Single-Supply Operating Voltage 12 V 6
Enable Voltage 3.5 3.3 V VS = +5V 6
Disable Voltage 1.8 1.7 V VS = +5V 6
Maximum Quiescent Current 4.5 4.8 mA VS = +5V 6
Minimum Quiescent Current 4.1 4.5 mA VS = +5V 6
Power Supply -6.5 6.5 V VDC 2
Differential Input Voltage -1.2 1.2 V Noninverting input to internal inverting node 2
Storage Temperature Range -65 125 °C D, DVB 2
Lead Temperature 300 °C soldering, 10s 2
Junction Temperature (TJ) TJ 175 °C 2
ESD Resistance HBM 2 kV HBM 2
ESD Resistance MM 200 V MM 2
Specification: D, DBV (Temperature Range) -40 85 °C D, DBV 4
Thermal Resistance, θJA DBV SOT23-6 θJA 150 °C/W DBV SOT23-6 4

CAD (KiCad official)

  • Symbol: OPA692IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa692idbvr-etched.step / opa692idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa692idbvr.step / opa692idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 50af9953896a9604, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF