Generated by kicad-footprint-generator · KiCad file format 20260206
OPA388IDR
Texas Instruments · Operational Amplifier · SOIC-8
OPA388IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Can be left floating; may optionally be tied to any potential within the supply range for layout convenience. |
| 2 | -IN | input | Inverting analog input. True rail-to-rail input (V-)-0.5 V to (V+)+0.5 V absolute max common-mode; typical input bias currents are very low (chopper-stabilized front end). Differential input voltage limited to (V+)-(V-)+0.2 V; series input current must stay within ±10 mA. |
| 3 | +IN | input | Noninverting analog input. True rail-to-rail input with EMI/RFI filtering; common-mode range extends from (V-)-0.5 V to (V+)+0.5 V (absolute max). Same ±10 mA input current limit as -IN. |
| 4 | V- | power_in | Negative (lowest) power-supply rail. Ground in single-supply operation, or the negative rail in dual-supply operation. Total supply (V+)-(V-) must be 2.5 V to 5.5 V (absolute max 6 V single / ±3 V dual). Bypass with a 0.1 µF ceramic capacitor placed close to the pin. |
| 5 | NC | unconnected | No internal connection. Can be left floating. |
| 6 | OUT | output | Amplifier output. True rail-to-rail output stage swings to within a few millivolts of both supplies with a 10 kΩ load; short-circuit-to-ground is continuous. Typical output impedance is low and settles to 0.01% in ~2 µs for a 1 V step. |
| 7 | V+ | power_in | Positive (highest) power-supply rail. 2.5 V to 5.5 V single-supply relative to V-, or up to +2.75 V in dual-supply operation. Bypass with a 0.1 µF ceramic capacitor placed close to the pin. |
| 8 | NC | unconnected | No internal connection. Can be left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
OPA388IDROPA388IDRG4OPA388IDRIDGKROPA388IDRIDGKTOPA388IDRIDBVROPA388IDRIDBVTOPA388IDRIDBVTG4
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -5 | 0.25 | 5 | µV | TA = 25°C (table header conditions) | 7 |
| Input offset voltage over temperature | VOS | -7.5 | 7.5 | µV | TA = –40°C to +125°C | 7 | |
| Input offset voltage drift | dVOS/dT | -0.05 | 0.005 | 0.05 | µV/°C | TA = –40°C to +125°C | 7 |
| Power-supply rejection ratio | PSRR | -1 | 0.1 | 1 | µV/V | TA = –40°C to +125°C | 7 |
| Input bias current | IB | -350 | 30 | 350 | pA | RIN = 100 kΩ | 8 |
| Input bias current | IB | -400 | 400 | pA | RIN = 100 kΩ, TA = 0°C to +85°C | 8 | |
| Input bias current | IB | -700 | 700 | pA | RIN = 100 kΩ, TA = –40°C to +125°C | 8 | |
| Input offset current | IOS | -700 | 700 | pA | RIN = 100 kΩ | 8 | |
| Input offset current | IOS | -800 | 800 | pA | RIN = 100 kΩ, TA = 0°C to +85°C | 8 | |
| Common-mode rejection ratio | CMRR | 124 | 138 | dB | (V–) – 0.1 V < VCM < (V+) + 0.1 V, VS = ±1.25 V | 8 | |
| Common-mode rejection ratio | CMRR | 124 | 140 | dB | (V–) – 0.1 V < VCM < (V+) + 0.1 V, VS = ±2.75 V | 8 | |
| Common-mode rejection ratio | CMRR | 114 | 134 | dB | (V–) < VCM < (V+) + 0.1 V, TA = –40°C to +125°C, VS = ±1.25 V | 8 | |
| Open-loop voltage gain | AOL | 126 | 148 | dB | (V–) + 0.15 V < VO < (V+) – 0.15 V, RLOAD = 10 kΩ | 9 | |
| Open-loop voltage gain | AOL | 120 | 126 | dB | (V–) + 0.15 V < VO < (V+) – 0.15 V, RLOAD = 10 kΩ, TA = –40°C to +125°C | 9 | |
| Open-loop voltage gain | AOL | 120 | 148 | dB | (V–) + 0.30 V < VO < (V+) – 0.30 V, RLOAD = 2 kΩ | 9 | |
| Voltage output swing from positive rail, no load | VO | 1 | 15 | mV | No load | 9 | |
| Voltage output swing from positive rail | VO | 5 | 20 | mV | RLOAD = 10 kΩ | 9 | |
| Voltage output swing from positive rail | VO | 20 | 50 | mV | RLOAD = 2 kΩ | 9 | |
| Voltage output swing from negative rail, no load | VO | 5 | 15 | mV | No load | 9 | |
| Voltage output swing from negative rail | VO | 10 | 20 | mV | RLOAD = 10 kΩ | 9 | |
| Voltage output swing from negative rail | VO | 40 | 60 | mV | RLOAD = 2 kΩ | 9 | |
| Voltage output swing from rail, both rails | VO | 10 | 25 | mV | TA = –40°C to +125°C, both rails, RLOAD = 10 kΩ | 9 | |
| Short-circuit current | ISC | -60 | 60 | mA | VS = 5.5 V | 9 | |
| Short-circuit current | ISC | -30 | 30 | mA | VS = 2.5 V | 9 | |
| Quiescent current per amplifier | IQ | 1.7 | 2.4 | mA | VS = ±1.25 V (VS = 2.5 V), IO = 0 A | 9 | |
| Quiescent current per amplifier over temperature | IQ | 1.7 | 2.4 | mA | VS = ±1.25 V (VS = 2.5 V), TA = –40°C to +125°C, IO = 0 A | 9 | |
| Quiescent current per amplifier | IQ | 1.9 | 2.6 | mA | VS = ±2.75 V (VS = 5.5 V), IO = 0 A | 9 | |
| Quiescent current per amplifier over temperature | IQ | 1.9 | 2.6 | mA | VS = ±2.75 V (VS = 5.5 V), TA = –40°C to +125°C, IO = 0 A | 9 | |
| Supply voltage, single-supply | VS = (V+) – (V–) | 6 | V | 6 | |||
| Supply voltage, dual-supply | VS = (V+) – (V–) | -3 | 3 | V | 6 | ||
| Current at signal input pins | -10 | 10 | mA | 6 | |||
| Operating temperature, TA | TA | -55 | 150 | °C | 6 | ||
| Junction temperature, TJ | TJ | 150 | °C | 6 | |||
| Storage temperature, Tstg | Tstg | -65 | 150 | °C | 6 | ||
| Supply voltage, single-supply (recommended) | VS = (V+) – (V–) | 2.5 | 5.5 | V | 6 | ||
| Supply voltage, dual-supply (recommended) | VS = (V+) – (V–) | 1.25 | 2.75 | V | 6 | ||
| Specified temperature | TA | -40 | 125 | °C | 6 | ||
| Junction-to-ambient thermal resistance (OPA388 D SOIC) | RθJA | 116 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (OPA388 D SOIC) | RθJC(top) | 60 | °C/W | 6 | |||
| Junction-to-board thermal resistance (OPA388 D SOIC) | RθJB | 56 | °C/W | 6 | |||
| Junction-to-top characterization parameter (OPA388 D SOIC) | ΨJT | 12.8 | °C/W | 6 | |||
| Junction-to-board characterization parameter (OPA388 D SOIC) | ΨJB | 55.9 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
OPA388IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
opa388idr-etched.step/opa388idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa388idr.step/opa388idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
bfaa584834295abb, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).