Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

OPA388IDR

Texas Instruments · Operational Amplifier · SOIC-8

OPA388IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection. Can be left floating; may optionally be tied to any potential within the supply range for layout convenience.
2 -IN input Inverting analog input. True rail-to-rail input (V-)-0.5 V to (V+)+0.5 V absolute max common-mode; typical input bias currents are very low (chopper-stabilized front end). Differential input voltage limited to (V+)-(V-)+0.2 V; series input current must stay within ±10 mA.
3 +IN input Noninverting analog input. True rail-to-rail input with EMI/RFI filtering; common-mode range extends from (V-)-0.5 V to (V+)+0.5 V (absolute max). Same ±10 mA input current limit as -IN.
4 V- power_in Negative (lowest) power-supply rail. Ground in single-supply operation, or the negative rail in dual-supply operation. Total supply (V+)-(V-) must be 2.5 V to 5.5 V (absolute max 6 V single / ±3 V dual). Bypass with a 0.1 µF ceramic capacitor placed close to the pin.
5 NC unconnected No internal connection. Can be left floating.
6 OUT output Amplifier output. True rail-to-rail output stage swings to within a few millivolts of both supplies with a 10 kΩ load; short-circuit-to-ground is continuous. Typical output impedance is low and settles to 0.01% in ~2 µs for a 1 V step.
7 V+ power_in Positive (highest) power-supply rail. 2.5 V to 5.5 V single-supply relative to V-, or up to +2.75 V in dual-supply operation. Bypass with a 0.1 µF ceramic capacitor placed close to the pin.
8 NC unconnected No internal connection. Can be left floating.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • OPA388IDR
  • OPA388IDRG4
  • OPA388IDRIDGKR
  • OPA388IDRIDGKT
  • OPA388IDRIDBVR
  • OPA388IDRIDBVT
  • OPA388IDRIDBVTG4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -5 0.25 5 µV TA = 25°C (table header conditions) 7
Input offset voltage over temperature VOS -7.5 7.5 µV TA = –40°C to +125°C 7
Input offset voltage drift dVOS/dT -0.05 0.005 0.05 µV/°C TA = –40°C to +125°C 7
Power-supply rejection ratio PSRR -1 0.1 1 µV/V TA = –40°C to +125°C 7
Input bias current IB -350 30 350 pA RIN = 100 kΩ 8
Input bias current IB -400 400 pA RIN = 100 kΩ, TA = 0°C to +85°C 8
Input bias current IB -700 700 pA RIN = 100 kΩ, TA = –40°C to +125°C 8
Input offset current IOS -700 700 pA RIN = 100 kΩ 8
Input offset current IOS -800 800 pA RIN = 100 kΩ, TA = 0°C to +85°C 8
Common-mode rejection ratio CMRR 124 138 dB (V–) – 0.1 V < VCM < (V+) + 0.1 V, VS = ±1.25 V 8
Common-mode rejection ratio CMRR 124 140 dB (V–) – 0.1 V < VCM < (V+) + 0.1 V, VS = ±2.75 V 8
Common-mode rejection ratio CMRR 114 134 dB (V–) < VCM < (V+) + 0.1 V, TA = –40°C to +125°C, VS = ±1.25 V 8
Open-loop voltage gain AOL 126 148 dB (V–) + 0.15 V < VO < (V+) – 0.15 V, RLOAD = 10 kΩ 9
Open-loop voltage gain AOL 120 126 dB (V–) + 0.15 V < VO < (V+) – 0.15 V, RLOAD = 10 kΩ, TA = –40°C to +125°C 9
Open-loop voltage gain AOL 120 148 dB (V–) + 0.30 V < VO < (V+) – 0.30 V, RLOAD = 2 kΩ 9
Voltage output swing from positive rail, no load VO 1 15 mV No load 9
Voltage output swing from positive rail VO 5 20 mV RLOAD = 10 kΩ 9
Voltage output swing from positive rail VO 20 50 mV RLOAD = 2 kΩ 9
Voltage output swing from negative rail, no load VO 5 15 mV No load 9
Voltage output swing from negative rail VO 10 20 mV RLOAD = 10 kΩ 9
Voltage output swing from negative rail VO 40 60 mV RLOAD = 2 kΩ 9
Voltage output swing from rail, both rails VO 10 25 mV TA = –40°C to +125°C, both rails, RLOAD = 10 kΩ 9
Short-circuit current ISC -60 60 mA VS = 5.5 V 9
Short-circuit current ISC -30 30 mA VS = 2.5 V 9
Quiescent current per amplifier IQ 1.7 2.4 mA VS = ±1.25 V (VS = 2.5 V), IO = 0 A 9
Quiescent current per amplifier over temperature IQ 1.7 2.4 mA VS = ±1.25 V (VS = 2.5 V), TA = –40°C to +125°C, IO = 0 A 9
Quiescent current per amplifier IQ 1.9 2.6 mA VS = ±2.75 V (VS = 5.5 V), IO = 0 A 9
Quiescent current per amplifier over temperature IQ 1.9 2.6 mA VS = ±2.75 V (VS = 5.5 V), TA = –40°C to +125°C, IO = 0 A 9
Supply voltage, single-supply VS = (V+) – (V–) 6 V 6
Supply voltage, dual-supply VS = (V+) – (V–) -3 3 V 6
Current at signal input pins -10 10 mA 6
Operating temperature, TA TA -55 150 °C 6
Junction temperature, TJ TJ 150 °C 6
Storage temperature, Tstg Tstg -65 150 °C 6
Supply voltage, single-supply (recommended) VS = (V+) – (V–) 2.5 5.5 V 6
Supply voltage, dual-supply (recommended) VS = (V+) – (V–) 1.25 2.75 V 6
Specified temperature TA -40 125 °C 6
Junction-to-ambient thermal resistance (OPA388 D SOIC) RθJA 116 °C/W 6
Junction-to-case (top) thermal resistance (OPA388 D SOIC) RθJC(top) 60 °C/W 6
Junction-to-board thermal resistance (OPA388 D SOIC) RθJB 56 °C/W 6
Junction-to-top characterization parameter (OPA388 D SOIC) ΨJT 12.8 °C/W 6
Junction-to-board characterization parameter (OPA388 D SOIC) ΨJB 55.9 °C/W 6

CAD (KiCad official)

  • Symbol: OPA388IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: opa388idr-etched.step / opa388idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa388idr.step / opa388idr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 bfaa584834295abb, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF