← Commit history
opa388idr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+75−1
page.json+75−1@@ -31,5 +31,79 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "OPA388IDR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Operational Amplifier",+ "datasheet": "https://www.ti.com/lit/ds/symlink/opa388.pdf",+ "parts": {+ "symbol": "opa388idr.kicad_sym",+ "footprint": "opa388idr.kicad_mod",+ "model_3d": "opa388idr-etched.glb",+ "model_3d_plain": "opa388idr.glb",+ "model_3d_step": "opa388idr-etched.step",+ "model_3d_step_plain": "opa388idr.step",+ "lbr": "opa388idr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Can be left floating; may optionally be tied to any potential within the supply range for layout convenience."+ },+ {+ "number": "2",+ "name": "-IN",+ "type": "input",+ "description": "Inverting analog input. True rail-to-rail input (V-)-0.5 V to (V+)+0.5 V absolute max common-mode; typical input bias currents are very low (chopper-stabilized front end). Differential input voltage limited to (V+)-(V-)+0.2 V; series input current must stay within ±10 mA."+ },+ {+ "number": "3",+ "name": "+IN",+ "type": "input",+ "description": "Noninverting analog input. True rail-to-rail input with EMI/RFI filtering; common-mode range extends from (V-)-0.5 V to (V+)+0.5 V (absolute max). Same ±10 mA input current limit as -IN."+ },+ {+ "number": "4",+ "name": "V-",+ "type": "power_in",+ "description": "Negative (lowest) power-supply rail. Ground in single-supply operation, or the negative rail in dual-supply operation. Total supply (V+)-(V-) must be 2.5 V to 5.5 V (absolute max 6 V single / ±3 V dual). Bypass with a 0.1 µF ceramic capacitor placed close to the pin."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Can be left floating."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "Amplifier output. True rail-to-rail output stage swings to within a few millivolts of both supplies with a 10 kΩ load; short-circuit-to-ground is continuous. Typical output impedance is low and settles to 0.01% in ~2 µs for a 1 V step."+ },+ {+ "number": "7",+ "name": "V+",+ "type": "power_in",+ "description": "Positive (highest) power-supply rail. 2.5 V to 5.5 V single-supply relative to V-, or up to +2.75 V in dual-supply operation. Bypass with a 0.1 µF ceramic capacitor placed close to the pin."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Can be left floating."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}