Generated by kicad-footprint-generator · KiCad file format 20260206
OPA378AIDBVR
Texas Instruments · Precision Op Amps · SOT-23-5
OPA378AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out | output | Rail-to-rail amplifier output that swings within 10mV of the supplies, with continuous short-circuit to ground protection. |
| 2 | V- | power_in | Negative supply (or ground in single-supply use); total supply VS = (V+) - (V-) is 2.2V to 5.5V, absolute maximum 7V. |
| 3 | +In | input | Non-inverting input with common-mode range 0.05V beyond the supply rails; limit input current to 10mA if the input exceeds the rails by more than 0.3V. |
| 4 | -In | input | Inverting input with common-mode range 0.05V beyond the supply rails; limit input current to 10mA if the input exceeds the rails by more than 0.3V. |
| 5 | V+ | power_in | Positive supply; operating VS of 2.2V to 5.5V, absolute maximum 7V, with a 0.1uF capacitor recommended close across the supply pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Specified Voltage Range | VS | 2.2 | 5.5 | V | 4 | ||
| Quiescent Current (per Amplifier) | IQ | 125 | 150 | µA | IO = 0mA, VS = +5.5V | 4 | |
| Quiescent Current over temperature | IQ | 165 | µA | over temperature | 4 | ||
| Input Offset Voltage, OPA378 | VOS | 20 | 50 | µV | VCM = V– | 3 | |
| Input Offset Voltage vs Temperature, OPA378 | dVOS/dT | 0.1 | 0.25 | µV/°C | 3 | ||
| PSRR vs Power Supply, OPA378 | PSRR | 1.5 | 5 | µV/V | VCM = 0V, VS = +2.2V to +5.5V | 3 | |
| PSRR vs Power Supply over temperature, OPA378 | PSRR | 3 | 8 | µV/V | over temperature, VCM = 0V, VS = +2.2V to +5.5V | 3 | |
| Input Bias Current, OPA378 | IB | -550 | 150 | 550 | pA | 3 | |
| Input Bias Current over temperature, OPA378 and OPA2378 | IB | -2 | 2 | nA | over temperature | 3 | |
| Input Offset Current, OPA378 | IOS | -1.1 | 0.3 | 1.1 | nA | 3 | |
| CMRR, VS = 5.5V | CMRR | 100 | 112 | dB | (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 5.5V | 3 | |
| CMRR, VS = 2.2V | CMRR | 94 | 106 | dB | (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 2.2V | 3 | |
| CMRR over temperature, VS = 5.5V | CMRR | 96 | dB | over temperature, (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 5.5V | 3 | ||
| CMRR over temperature, VS = 2.2V | CMRR | 90 | dB | over temperature, (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 2.2V | 3 | ||
| Open-Loop Voltage Gain, RL = 100kΩ | AOL | 110 | 134 | dB | 50mV < VO < (V+) – 50mV, RL = 100kΩ | 3 | |
| Open-Loop Voltage Gain, RL = 10kΩ | AOL | 110 | 130 | dB | 100mV < VO < (V+) – 100mV, RL = 10kΩ | 3 | |
| Open-Loop Voltage Gain over temperature | AOL | 106 | dB | over temperature, 100mV < VO < (V+) – 100mV, RL = 10kΩ | 3 | ||
| Voltage Output Swing from Rail, OPA378 | VO | 6 | 8 | mV | RL = 10kΩ | 4 | |
| Voltage Output Swing from Rail over temperature, OPA378 | VO | 8 | 13 | mV | over temperature, RL = 10kΩ | 4 | |
| Voltage Output Swing from Rail | VO | 0.7 | 2 | mV | RL = 100kΩ | 4 | |
| Voltage Output Swing from Rail over temperature | VO | 3 | mV | over temperature, RL = 100kΩ | 4 | ||
| Short-Circuit Current | ISC | -30 | 30 | mA | 4 | ||
| Specified Range | -40 | 125 | °C | 4 | |||
| Operating Range | -55 | 150 | °C | 4 | |||
| Thermal Resistance θJA, SOT23-5 | θJA | 200 | °C/W | SOT23-5 package | 4 | ||
| Supply Voltage | VS | 7 | V | 2 | |||
| Signal Input Terminals Current | -10 | 10 | mA | 2 | |||
| Operating Temperature | TA | -55 | 150 | °C | 2 | ||
| Storage Temperature | TA | -65 | 150 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| ESD Rating, Human Body Model | HBM | 4000 | V | 2 | |||
| ESD Rating, Charged Device Model | CDM | 1000 | V | 2 | |||
| ESD Rating, Machine Model | MM | 200 | V | 2 | |||
| Input Voltage Noise, 0.1Hz to 10Hz | en | 0.4 | µVPP | f = 0.1Hz to 10Hz, VS = +5.5V | 3 | ||
| Input Voltage Noise Density | en | 20 | nV/√Hz | f = 1kHz | 3 | ||
| Input Current Noise Density | in | 200 | fA/√Hz | f = 10Hz | 3 | ||
| Gain-Bandwidth Product | GBW | 900 | kHz | 3 | |||
| Slew Rate | SR | 0.4 | V/µs | G = +1 | 3 | ||
| Settling Time 0.1% | tS | 7 | µs | VS = 5.5V, 2V Step, G = +1 | 3 | ||
| Settling Time 0.01% | tS | 9 | µs | VS = 5.5V, 2V Step, G = +1 | 3 | ||
| Overload Recovery Time | 4 | µs | VIN × Gain > VS | 3 | |||
| THD + Noise | THD + N | 0.003 | % | VS = 5V, VO = 3VPP, G = +1, f = 1kHz | 3 | ||
| Differential Input Capacitance | CIN | 4 | pF | 3 | |||
| Common-Mode Input Capacitance | 5 | pF | 3 |
CAD (KiCad official)
- Symbol:
OPA378AIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
opa378aidbvr-etched.step/opa378aidbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa378aidbvr.step/opa378aidbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
1e0d61dcd717667f, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).