Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA378AIDBVR

Texas Instruments · Precision Op Amps · SOT-23-5

OPA378AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out output Rail-to-rail amplifier output that swings within 10mV of the supplies, with continuous short-circuit to ground protection.
2 V- power_in Negative supply (or ground in single-supply use); total supply VS = (V+) - (V-) is 2.2V to 5.5V, absolute maximum 7V.
3 +In input Non-inverting input with common-mode range 0.05V beyond the supply rails; limit input current to 10mA if the input exceeds the rails by more than 0.3V.
4 -In input Inverting input with common-mode range 0.05V beyond the supply rails; limit input current to 10mA if the input exceeds the rails by more than 0.3V.
5 V+ power_in Positive supply; operating VS of 2.2V to 5.5V, absolute maximum 7V, with a 0.1uF capacitor recommended close across the supply pins.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Specified Voltage Range VS 2.2 5.5 V 4
Quiescent Current (per Amplifier) IQ 125 150 µA IO = 0mA, VS = +5.5V 4
Quiescent Current over temperature IQ 165 µA over temperature 4
Input Offset Voltage, OPA378 VOS 20 50 µV VCM = V– 3
Input Offset Voltage vs Temperature, OPA378 dVOS/dT 0.1 0.25 µV/°C 3
PSRR vs Power Supply, OPA378 PSRR 1.5 5 µV/V VCM = 0V, VS = +2.2V to +5.5V 3
PSRR vs Power Supply over temperature, OPA378 PSRR 3 8 µV/V over temperature, VCM = 0V, VS = +2.2V to +5.5V 3
Input Bias Current, OPA378 IB -550 150 550 pA 3
Input Bias Current over temperature, OPA378 and OPA2378 IB -2 2 nA over temperature 3
Input Offset Current, OPA378 IOS -1.1 0.3 1.1 nA 3
CMRR, VS = 5.5V CMRR 100 112 dB (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 5.5V 3
CMRR, VS = 2.2V CMRR 94 106 dB (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 2.2V 3
CMRR over temperature, VS = 5.5V CMRR 96 dB over temperature, (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 5.5V 3
CMRR over temperature, VS = 2.2V CMRR 90 dB over temperature, (V–) – 0.05V < VCM < (V+) + 0.05V, VS = 2.2V 3
Open-Loop Voltage Gain, RL = 100kΩ AOL 110 134 dB 50mV < VO < (V+) – 50mV, RL = 100kΩ 3
Open-Loop Voltage Gain, RL = 10kΩ AOL 110 130 dB 100mV < VO < (V+) – 100mV, RL = 10kΩ 3
Open-Loop Voltage Gain over temperature AOL 106 dB over temperature, 100mV < VO < (V+) – 100mV, RL = 10kΩ 3
Voltage Output Swing from Rail, OPA378 VO 6 8 mV RL = 10kΩ 4
Voltage Output Swing from Rail over temperature, OPA378 VO 8 13 mV over temperature, RL = 10kΩ 4
Voltage Output Swing from Rail VO 0.7 2 mV RL = 100kΩ 4
Voltage Output Swing from Rail over temperature VO 3 mV over temperature, RL = 100kΩ 4
Short-Circuit Current ISC -30 30 mA 4
Specified Range -40 125 °C 4
Operating Range -55 150 °C 4
Thermal Resistance θJA, SOT23-5 θJA 200 °C/W SOT23-5 package 4
Supply Voltage VS 7 V 2
Signal Input Terminals Current -10 10 mA 2
Operating Temperature TA -55 150 °C 2
Storage Temperature TA -65 150 °C 2
Junction Temperature TJ 150 °C 2
ESD Rating, Human Body Model HBM 4000 V 2
ESD Rating, Charged Device Model CDM 1000 V 2
ESD Rating, Machine Model MM 200 V 2
Input Voltage Noise, 0.1Hz to 10Hz en 0.4 µVPP f = 0.1Hz to 10Hz, VS = +5.5V 3
Input Voltage Noise Density en 20 nV/√Hz f = 1kHz 3
Input Current Noise Density in 200 fA/√Hz f = 10Hz 3
Gain-Bandwidth Product GBW 900 kHz 3
Slew Rate SR 0.4 V/µs G = +1 3
Settling Time 0.1% tS 7 µs VS = 5.5V, 2V Step, G = +1 3
Settling Time 0.01% tS 9 µs VS = 5.5V, 2V Step, G = +1 3
Overload Recovery Time 4 µs VIN × Gain > VS 3
THD + Noise THD + N 0.003 % VS = 5V, VO = 3VPP, G = +1, f = 1kHz 3
Differential Input Capacitance CIN 4 pF 3
Common-Mode Input Capacitance 5 pF 3

CAD (KiCad official)

  • Symbol: OPA378AIDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: opa378aidbvr-etched.step / opa378aidbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa378aidbvr.step / opa378aidbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 1e0d61dcd717667f, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF