Generated by kicad-footprint-generator · KiCad file format 20260206
OPA358AIDCKR
Texas Instruments · Operational Amplifier · SC-70-6
OPA358AIDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive power supply; specified range 2.7V to 3.3V (operating range 2.5V to 3.6V); bypass with 100nF ceramic capacitor to ground. |
| 2 | Enable | input | Shutdown enable control input; logic HIGH (≥1.6V) enables amplifier, logic LOW (≤0.8V) disables output; internal pull-up to V+. |
| 3 | Out | output | Output terminal; at +3.3V with AOL > 84dB output swings (V−) + 100mV to (V+) − 200mV with ±50mA output current capability. |
| 4 | −In | input | Inverting input terminal; common-mode range (V−) − 0.1V to (V+) − 1.0V; input diode-clamped to supply rails with external current limiting to 10mA maximum for overdrive protection. |
| 5 | GND | power_in | Power supply ground (negative rail); bypass with 100nF ceramic capacitor to V+. |
| 6 | +In | input | Non-inverting input terminal; common-mode range (V−) − 0.1V to (V+) − 1.0V; input diode-clamped to supply rails with external current limiting to 10mA maximum for overdrive protection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -6 | 2 | 6 | mV | VS = +3.3V | 3 |
| Input Offset Voltage over temperature | -15 | 15 | mV | Specified Temperature Range | 3 | ||
| Power Supply Rejection Ratio (vs. power supply) | PSRR | -350 | 80 | 350 | µV/V | VS = +2.7V to +3.3V | 3 |
| Input Bias Current | IB | -50 | 0.3 | 50 | pA | 3 | |
| Input Offset Current | IOS | -50 | 1 | 50 | pA | 3 | |
| Common-Mode Voltage Range | VCM | -0.1 | -1 | V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 60 | 80 | dB | VS = +3.3V, −0.1V < VCM < 2.3V | 3 | |
| Common-Mode Rejection Ratio over temperature | 60 | dB | Specified Temperature Range | 3 | |||
| Open-Loop Voltage Gain | AOL | 84 | 92 | dB | VS = +3.3V, 0.1V < VO < 3.1V | 3 | |
| Voltage Output Swing from Rail | 100 | -200 | mV | VS = +3.3V, AOL > 84dB | 3 | ||
| Voltage Output Swing from Rail over temperature | 100 | -300 | mV | VS = +3.3V, over temperature | 3 | ||
| Output Current | IO | -50 | 50 | mA | VS = +3.3V, 0.5V from Supplies | 3 | |
| Specified Voltage Range | VS | 2.7 | 3.3 | V | 3 | ||
| Minimum Operating Voltage Range | 2.5 | 3.6 | V | 3 | |||
| Quiescent Current | IQ | 5.2 | 7.5 | mA | VS = +3.3V, Enabled, IO = 0 | 3 | |
| Quiescent Current over temperature | IQ | 8.5 | mA | Specified Temperature Range | 3 | ||
| Enable logic-LOW threshold (Disabled) | 0.8 | V | 3 | ||||
| Enable logic-HIGH threshold (Enabled) | 1.6 | V | 3 | ||||
| Shutdown Current | 2.5 | 5 | µA | VS = +3.3, Disabled | 3 | ||
| Specified Temperature Range | -40 | 85 | °C | 3 | |||
| Operating Temperature Range | -40 | 85 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Thermal Resistance, junction to ambient (SC70) | JA | 250 | °C/W | SC70 package | 3 | ||
| Supply Voltage (V+ to V−) | 3.6 | V | 2 | ||||
| Signal Input Terminals Voltage | -0.5 | 0.5 | V | Relative to (V−) and (V+) as printed | 2 | ||
| Signal Input Terminals Current | -10 | 10 | mA | 2 | |||
| Operating Temperature | -40 | 85 | °C | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 160 | °C | 2 | ||||
| Lead Temperature (soldering) | 300 | °C | Soldering, 10s | 2 | |||
| ESD Rating Human Body Model (HBM) | 4000 | V | Human Body Model (HBM) | 2 | |||
| ESD Rating Charged Device Model (CDM) | 1500 | V | Charged Device Model (CDM) | 2 | |||
| ESD Rating Machine Model (MM) | 400 | V | Machine Model (MM) | 2 |
CAD (KiCad official)
- Symbol:
OPA358AIDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
opa358aidckr-etched.step/opa358aidckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa358aidckr.step/opa358aidckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
16a8785ec75a8a5c, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).