Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA358AIDCKR

Texas Instruments · Operational Amplifier · SC-70-6

OPA358AIDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_in Positive power supply; specified range 2.7V to 3.3V (operating range 2.5V to 3.6V); bypass with 100nF ceramic capacitor to ground.
2 Enable input Shutdown enable control input; logic HIGH (≥1.6V) enables amplifier, logic LOW (≤0.8V) disables output; internal pull-up to V+.
3 Out output Output terminal; at +3.3V with AOL > 84dB output swings (V−) + 100mV to (V+) − 200mV with ±50mA output current capability.
4 −In input Inverting input terminal; common-mode range (V−) − 0.1V to (V+) − 1.0V; input diode-clamped to supply rails with external current limiting to 10mA maximum for overdrive protection.
5 GND power_in Power supply ground (negative rail); bypass with 100nF ceramic capacitor to V+.
6 +In input Non-inverting input terminal; common-mode range (V−) − 0.1V to (V+) − 1.0V; input diode-clamped to supply rails with external current limiting to 10mA maximum for overdrive protection.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -6 2 6 mV VS = +3.3V 3
Input Offset Voltage over temperature -15 15 mV Specified Temperature Range 3
Power Supply Rejection Ratio (vs. power supply) PSRR -350 80 350 µV/V VS = +2.7V to +3.3V 3
Input Bias Current IB -50 0.3 50 pA 3
Input Offset Current IOS -50 1 50 pA 3
Common-Mode Voltage Range VCM -0.1 -1 V 3
Common-Mode Rejection Ratio CMRR 60 80 dB VS = +3.3V, −0.1V < VCM < 2.3V 3
Common-Mode Rejection Ratio over temperature 60 dB Specified Temperature Range 3
Open-Loop Voltage Gain AOL 84 92 dB VS = +3.3V, 0.1V < VO < 3.1V 3
Voltage Output Swing from Rail 100 -200 mV VS = +3.3V, AOL > 84dB 3
Voltage Output Swing from Rail over temperature 100 -300 mV VS = +3.3V, over temperature 3
Output Current IO -50 50 mA VS = +3.3V, 0.5V from Supplies 3
Specified Voltage Range VS 2.7 3.3 V 3
Minimum Operating Voltage Range 2.5 3.6 V 3
Quiescent Current IQ 5.2 7.5 mA VS = +3.3V, Enabled, IO = 0 3
Quiescent Current over temperature IQ 8.5 mA Specified Temperature Range 3
Enable logic-LOW threshold (Disabled) 0.8 V 3
Enable logic-HIGH threshold (Enabled) 1.6 V 3
Shutdown Current 2.5 5 µA VS = +3.3, Disabled 3
Specified Temperature Range -40 85 °C 3
Operating Temperature Range -40 85 °C 3
Storage Temperature Range -65 150 °C 3
Thermal Resistance, junction to ambient (SC70) JA 250 °C/W SC70 package 3
Supply Voltage (V+ to V−) 3.6 V 2
Signal Input Terminals Voltage -0.5 0.5 V Relative to (V−) and (V+) as printed 2
Signal Input Terminals Current -10 10 mA 2
Operating Temperature -40 85 °C 2
Storage Temperature -65 150 °C 2
Junction Temperature 160 °C 2
Lead Temperature (soldering) 300 °C Soldering, 10s 2
ESD Rating Human Body Model (HBM) 4000 V Human Body Model (HBM) 2
ESD Rating Charged Device Model (CDM) 1500 V Charged Device Model (CDM) 2
ESD Rating Machine Model (MM) 400 V Machine Model (MM) 2

CAD (KiCad official)

  • Symbol: OPA358AIDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: opa358aidckr-etched.step / opa358aidckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa358aidckr.step / opa358aidckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 16a8785ec75a8a5c, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF