main
History Download
Ray Publish 0.1.0 af6de65

OPA349NA

Texas Instruments · Operational Amplifier · SOT-23-5

OPA349NA from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, which swings to within 350mV of the rails at a 10kΩ load and supplies up to 8mA drive current.
2 V- power_in Negative power supply (ground in single-supply use); supply span is 1.8V to 5.5V between V+ and V-.
3 +IN input Non-inverting input whose common-mode range extends 200mV beyond both supply rails; input current is limited to 10mA if the signal swings more than 0.5V beyond the rails.
4 -In input Inverting input whose common-mode range extends 200mV beyond both supply rails; input current is limited to 10mA if the signal swings more than 0.5V beyond the rails.
5 V+ power_in Positive power supply, specified from 1.8V to 5.5V (absolute maximum V+ to V- is 5.5V), to be bypassed with a 0.01µF ceramic capacitor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -10 2 10 mV VS = 5V, VCM = 2.5V 3
Input Offset Voltage over temperature VOS -13 2 13 mV Over Temperature 3
Power-Supply Rejection Ratio PSRR 350 1000 µV/V VS = 1.8V to 5.5V, VCM = (V-) + 0.3V 3
Power-Supply Rejection Ratio over temperature PSRR 3000 µV/V Over Temperature 3
Common-Mode Rejection Ratio CMRR 48 60 dB VS = +5V, -0.2V < VCM < 5.2V 3
Common-Mode Rejection Ratio over temperature CMRR 46 dB Over Temperature 3
Common-Mode Rejection Ratio CMRR 52 72 dB VS = +5V, -0.2V < VCM < 3.5V 3
Common-Mode Rejection Ratio over temperature CMRR 50 dB Over Temperature 3
Input Bias Current IB -10 0.5 10 pA 3
Input Offset Current IOS -10 1 10 pA 3
Open-Loop Voltage Gain AOL 74 90 dB RL = 1MΩ, VS = +5.5V, +0.3V < VO < +5.2V 3
Open-Loop Voltage Gain over temperature AOL 72 dB Over Temperature 3
Open-Loop Voltage Gain over temperature AOL 60 dB Over Temperature 3
Voltage Output Swing from Rail 300 mV RL = 1MΩ, VS = +5.5V, AOL > 74dB 3
Voltage Output Swing from Rail over temperature 300 mV Over Temperature 3
Voltage Output Swing from Rail 350 mV RL = 10kΩ, VS = +5.5V, AOL > 74dB 3
Voltage Output Swing from Rail over temperature 350 mV Over Temperature 3
Output Current -8 8 mA 3
Short-Circuit Current ISC -10 10 mA 3
Specified Voltage Range VS 1.8 5.5 V 3
Quiescent Current (per amplifier) IQ 1 2 µA IO = 0 3
Quiescent Current (per amplifier) over temperature IQ 10 µA Over Temperature 3
Specified Range 0 70 °C 3
Operating Range 0 85 °C 3
Thermal Resistance, junction to ambient θJA 200 °C/W SOT23-5 Surface-Mount 3
Supply Voltage (V+ to V-) 5.5 V 2
Signal Input Terminals Current 10 mA Signal input terminals 2
Operating Temperature, OPA349 0 85 °C OPA349 2
Storage Temperature -65 150 °C 2
Junction Temperature 150 °C 2
Lead Temperature 300 °C soldering, 3s 2

CAD (KiCad official)

  • Symbol: OPA349NA
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa349na-3k-etched.step / opa349na-3k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa349na-3k.step / opa349na-3k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 2ad4d2616ad20ca5, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF