Generated by kicad-footprint-generator · KiCad file format 20260206
OPA349NA
Texas Instruments · Operational Amplifier · SOT-23-5
OPA349NA from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which swings to within 350mV of the rails at a 10kΩ load and supplies up to 8mA drive current. |
| 2 | V- | power_in | Negative power supply (ground in single-supply use); supply span is 1.8V to 5.5V between V+ and V-. |
| 3 | +IN | input | Non-inverting input whose common-mode range extends 200mV beyond both supply rails; input current is limited to 10mA if the signal swings more than 0.5V beyond the rails. |
| 4 | -In | input | Inverting input whose common-mode range extends 200mV beyond both supply rails; input current is limited to 10mA if the signal swings more than 0.5V beyond the rails. |
| 5 | V+ | power_in | Positive power supply, specified from 1.8V to 5.5V (absolute maximum V+ to V- is 5.5V), to be bypassed with a 0.01µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -10 | 2 | 10 | mV | VS = 5V, VCM = 2.5V | 3 |
| Input Offset Voltage over temperature | VOS | -13 | 2 | 13 | mV | Over Temperature | 3 |
| Power-Supply Rejection Ratio | PSRR | 350 | 1000 | µV/V | VS = 1.8V to 5.5V, VCM = (V-) + 0.3V | 3 | |
| Power-Supply Rejection Ratio over temperature | PSRR | 3000 | µV/V | Over Temperature | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 48 | 60 | dB | VS = +5V, -0.2V < VCM < 5.2V | 3 | |
| Common-Mode Rejection Ratio over temperature | CMRR | 46 | dB | Over Temperature | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 52 | 72 | dB | VS = +5V, -0.2V < VCM < 3.5V | 3 | |
| Common-Mode Rejection Ratio over temperature | CMRR | 50 | dB | Over Temperature | 3 | ||
| Input Bias Current | IB | -10 | 0.5 | 10 | pA | 3 | |
| Input Offset Current | IOS | -10 | 1 | 10 | pA | 3 | |
| Open-Loop Voltage Gain | AOL | 74 | 90 | dB | RL = 1MΩ, VS = +5.5V, +0.3V < VO < +5.2V | 3 | |
| Open-Loop Voltage Gain over temperature | AOL | 72 | dB | Over Temperature | 3 | ||
| Open-Loop Voltage Gain over temperature | AOL | 60 | dB | Over Temperature | 3 | ||
| Voltage Output Swing from Rail | 300 | mV | RL = 1MΩ, VS = +5.5V, AOL > 74dB | 3 | |||
| Voltage Output Swing from Rail over temperature | 300 | mV | Over Temperature | 3 | |||
| Voltage Output Swing from Rail | 350 | mV | RL = 10kΩ, VS = +5.5V, AOL > 74dB | 3 | |||
| Voltage Output Swing from Rail over temperature | 350 | mV | Over Temperature | 3 | |||
| Output Current | -8 | 8 | mA | 3 | |||
| Short-Circuit Current | ISC | -10 | 10 | mA | 3 | ||
| Specified Voltage Range | VS | 1.8 | 5.5 | V | 3 | ||
| Quiescent Current (per amplifier) | IQ | 1 | 2 | µA | IO = 0 | 3 | |
| Quiescent Current (per amplifier) over temperature | IQ | 10 | µA | Over Temperature | 3 | ||
| Specified Range | 0 | 70 | °C | 3 | |||
| Operating Range | 0 | 85 | °C | 3 | |||
| Thermal Resistance, junction to ambient | θJA | 200 | °C/W | SOT23-5 Surface-Mount | 3 | ||
| Supply Voltage (V+ to V-) | 5.5 | V | 2 | ||||
| Signal Input Terminals Current | 10 | mA | Signal input terminals | 2 | |||
| Operating Temperature, OPA349 | 0 | 85 | °C | OPA349 | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature | 300 | °C | soldering, 3s | 2 |
CAD (KiCad official)
- Symbol:
OPA349NA - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa349na-3k-etched.step/opa349na-3k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa349na-3k.step/opa349na-3k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
2ad4d2616ad20ca5, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).