main
History Download
Ray Publish 0.1.0 bc7ae48

OPA322AIDBVT

Texas Instruments · Operational Amplifier · SOT-23-5

OPA322AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output; with a 10-kΩ load it swings to within 20 mV of either rail at 25°C and within 30 mV over −40°C to 125°C.
2 V- power_in Negative (lowest) power supply; the device is specified from 1.8 V to 5.5 V total supply (±0.9 V to ±2.75 V split supply), with local ceramic bypass of 0.001 µF to 0.1 µF recommended at the supply pins.
3 +IN input Noninverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and input signals beyond the supply rails by more than 0.5 V must be limited to 10 mA.
4 -IN input Inverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and input signals beyond the supply rails by more than 0.5 V must be limited to 10 mA.
5 V+ power_in Positive (highest) power supply; the supply voltage must not exceed 6 V (absolute maximum), with 1.8 V to 5.5 V as the specified operating range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS 0.5 2 mV 9
Input offset voltage drift vs temperature dVOS/dT 1.8 6 μV/°C VS = 5.5 V 9
Power supply rejection PSR 10 50 μV/V VS = 1.8 V to 5.5 V, TA = 25°C 9
Power supply rejection PSR 20 65 μV/V VS = 1.8 V to 5.5 V, TA = -40°C to 125°C 9
Common-mode rejection ratio CMRR 90 100 dB (V-), 0.1 V < VCM < (V+) + 0.1 V, TA = 25°C 9
Common-mode rejection ratio CMRR 90 dB (V-), 0.1 V < VCM < (V+) + 0.1 V, TA = -40°C to 125°C 9
Input bias current IB -10 0.2 10 pA TA = 25°C 9
Input bias current IB -50 50 pA TA = -40°C to 85°C 9
Input bias current IB -800 800 pA OPA322 and OPA322S, TA = -40°C to 125°C 9
Input offset current IOS -10 0.2 10 pA TA = 25°C 9
Input offset current IOS -50 50 pA TA = -40°C to 85°C 9
Input offset current IOS -400 400 pA TA = -40°C to 125°C 9
Open-loop voltage gain AOL 100 130 dB 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ 9
Open-loop voltage gain AOL 94 dB 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ 9
Voltage output swing from rails VO 10 20 mV RL = 10 kΩ, TA = 25°C 10
Voltage output swing from rails VO 30 mV RL = 10 kΩ, TA = -40°C to 125°C 10
Short-circuit current ISC -65 65 mA VS = 5.5 V 10
Specified voltage range VS 1.8 5.5 V 10
Quiescent current per amplifier (OPA322) IQ 1.6 1.9 mA IO = 0 mA, VS = 5.5 V, TA = 25°C 10
Quiescent current per amplifier (OPA322) IQ 2 mA IO = 0 mA, VS = 5.5 V, TA = -40°C to 125°C 10
Quiescent current per amplifier in shutdown IQSD 0.1 0.5 µA VS = 1.8 V to 5.5 V, all amplifiers disabled, SHDN = VS- 10
Supply voltage VS 6 V VS = (V+), (V-) 7
Signal input pins current -10 10 mA Input terminals diode-clamped to supply rails 7
Operating temperature TA -40 150 °C Operating free-air temperature 7
Junction temperature TJ 150 °C 7
Storage temperature Tstg -65 150 °C 7
Specified voltage VS 1.8 5.5 V 7
Specified temperature TA -40 125 °C 7
Junction-to-ambient thermal resistance (DBV 5-pin) RθJA 219.3 °C/W DBV (SOT-23), 5 pins 8
Junction-to-case (top) thermal resistance (DBV 5-pin) RθJC(top) 107.5 °C/W DBV (SOT-23), 5 pins 8
Junction-to-board thermal resistance (DBV 5-pin) RθJB 57.5 °C/W DBV (SOT-23), 5 pins 8
Junction-to-top characterization parameter (DBV 5-pin) ψJT 7.4 °C/W DBV (SOT-23), 5 pins 8
Junction-to-board characterization parameter (DBV 5-pin) ψJB 56.9 °C/W DBV (SOT-23), 5 pins 8

CAD (KiCad official)

  • Symbol: OPA322AIDBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa322aidbvt-etched.step / opa322aidbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa322aidbvt.step / opa322aidbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (61 pp, sha256 c39f7a65d63151cf, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF