Generated by kicad-footprint-generator · KiCad file format 20260206
OPA322AIDBVT
Texas Instruments · Operational Amplifier · SOT-23-5
OPA322AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; with a 10-kΩ load it swings to within 20 mV of either rail at 25°C and within 30 mV over −40°C to 125°C. |
| 2 | V- | power_in | Negative (lowest) power supply; the device is specified from 1.8 V to 5.5 V total supply (±0.9 V to ±2.75 V split supply), with local ceramic bypass of 0.001 µF to 0.1 µF recommended at the supply pins. |
| 3 | +IN | input | Noninverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and input signals beyond the supply rails by more than 0.5 V must be limited to 10 mA. |
| 4 | -IN | input | Inverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and input signals beyond the supply rails by more than 0.5 V must be limited to 10 mA. |
| 5 | V+ | power_in | Positive (highest) power supply; the supply voltage must not exceed 6 V (absolute maximum), with 1.8 V to 5.5 V as the specified operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 0.5 | 2 | mV | 9 | ||
| Input offset voltage drift vs temperature | dVOS/dT | 1.8 | 6 | μV/°C | VS = 5.5 V | 9 | |
| Power supply rejection | PSR | 10 | 50 | μV/V | VS = 1.8 V to 5.5 V, TA = 25°C | 9 | |
| Power supply rejection | PSR | 20 | 65 | μV/V | VS = 1.8 V to 5.5 V, TA = -40°C to 125°C | 9 | |
| Common-mode rejection ratio | CMRR | 90 | 100 | dB | (V-), 0.1 V < VCM < (V+) + 0.1 V, TA = 25°C | 9 | |
| Common-mode rejection ratio | CMRR | 90 | dB | (V-), 0.1 V < VCM < (V+) + 0.1 V, TA = -40°C to 125°C | 9 | ||
| Input bias current | IB | -10 | 0.2 | 10 | pA | TA = 25°C | 9 |
| Input bias current | IB | -50 | 50 | pA | TA = -40°C to 85°C | 9 | |
| Input bias current | IB | -800 | 800 | pA | OPA322 and OPA322S, TA = -40°C to 125°C | 9 | |
| Input offset current | IOS | -10 | 0.2 | 10 | pA | TA = 25°C | 9 |
| Input offset current | IOS | -50 | 50 | pA | TA = -40°C to 85°C | 9 | |
| Input offset current | IOS | -400 | 400 | pA | TA = -40°C to 125°C | 9 | |
| Open-loop voltage gain | AOL | 100 | 130 | dB | 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ | 9 | |
| Open-loop voltage gain | AOL | 94 | dB | 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ | 9 | ||
| Voltage output swing from rails | VO | 10 | 20 | mV | RL = 10 kΩ, TA = 25°C | 10 | |
| Voltage output swing from rails | VO | 30 | mV | RL = 10 kΩ, TA = -40°C to 125°C | 10 | ||
| Short-circuit current | ISC | -65 | 65 | mA | VS = 5.5 V | 10 | |
| Specified voltage range | VS | 1.8 | 5.5 | V | 10 | ||
| Quiescent current per amplifier (OPA322) | IQ | 1.6 | 1.9 | mA | IO = 0 mA, VS = 5.5 V, TA = 25°C | 10 | |
| Quiescent current per amplifier (OPA322) | IQ | 2 | mA | IO = 0 mA, VS = 5.5 V, TA = -40°C to 125°C | 10 | ||
| Quiescent current per amplifier in shutdown | IQSD | 0.1 | 0.5 | µA | VS = 1.8 V to 5.5 V, all amplifiers disabled, SHDN = VS- | 10 | |
| Supply voltage | VS | 6 | V | VS = (V+), (V-) | 7 | ||
| Signal input pins current | -10 | 10 | mA | Input terminals diode-clamped to supply rails | 7 | ||
| Operating temperature | TA | -40 | 150 | °C | Operating free-air temperature | 7 | |
| Junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Specified voltage | VS | 1.8 | 5.5 | V | 7 | ||
| Specified temperature | TA | -40 | 125 | °C | 7 | ||
| Junction-to-ambient thermal resistance (DBV 5-pin) | RθJA | 219.3 | °C/W | DBV (SOT-23), 5 pins | 8 | ||
| Junction-to-case (top) thermal resistance (DBV 5-pin) | RθJC(top) | 107.5 | °C/W | DBV (SOT-23), 5 pins | 8 | ||
| Junction-to-board thermal resistance (DBV 5-pin) | RθJB | 57.5 | °C/W | DBV (SOT-23), 5 pins | 8 | ||
| Junction-to-top characterization parameter (DBV 5-pin) | ψJT | 7.4 | °C/W | DBV (SOT-23), 5 pins | 8 | ||
| Junction-to-board characterization parameter (DBV 5-pin) | ψJB | 56.9 | °C/W | DBV (SOT-23), 5 pins | 8 |
CAD (KiCad official)
- Symbol:
OPA322AIDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa322aidbvt-etched.step/opa322aidbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa322aidbvt.step/opa322aidbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (61 pp, sha256
c39f7a65d63151cf, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).