Generated by kicad-footprint-generator · KiCad file format 20260206
OPA2810IDGKT
Texas Instruments · Operational Amplifier · VSSOP-8
OPA2810IDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VO1 | output | Amplifier 1 output pin. |
| 2 | VIN1- | input | Amplifier 1 inverting input pin. |
| 3 | VIN1+ | input | Amplifier 1 noninverting input pin. |
| 4 | VS- | power_in | Negative power supply pin; total supply VS = VS+ - VS- is 4.75 V to 27 V per the Recommended Operating Conditions. |
| 5 | VIN2+ | input | Amplifier 2 noninverting input pin. |
| 6 | VIN2- | input | Amplifier 2 inverting input pin. |
| 7 | VO2 | output | Amplifier 2 output pin. |
| 8 | VS+ | power_in | Positive power supply pin; total supply VS = VS+ - VS- is 4.75 V to 27 V per the Recommended Operating Conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Open-loop voltage gain | AOL | 104 | 118 | dB | f = DC, Vo = 1.25 V to 3.25 V | 11 | |
| Input offset voltage | VOS | 0.1 | 1.5 | mV | TA = 25°C, no-load | 11 | |
| Input bias current | IB | 2 | 20 | pA | TA = 25°C | 12 | |
| Input bias current | IB | 20 | 50 | pA | TA = -40°C to +85°C | 12 | |
| Input bias current | IB | 100 | 340 | pA | TA = -40°C to +125°C | 12 | |
| Input offset current | IOS | 1 | 20 | pA | TA = 25°C | 12 | |
| Common-mode rejection ratio | CMRR | 78 | 92 | dB | f = DC, TA = 25°C, VCM = 0.75 V to 1.75 V | 12 | |
| Allowable input differential voltage | -5 | 5 | V | See Figure 57 | 12 | ||
| Open-loop voltage gain (auxiliary CMOS input stage) | 80 | 100 | dB | VCM = VS+, 1 V, f = DC, Vo = 1.5 V to 2.5 V | 13 | ||
| Input bias current (auxiliary CMOS input stage) | IB | 2 | 20 | pA | VCM = VS+, 1.5 V | 13 | |
| Input bias current (auxiliary CMOS input stage) | IB | 0.15 | 0.5 | nA | VCM = VS+, 1.5 V, TA = -40°C to +125°C | 13 | |
| Input offset voltage mismatch | 0.1 | 2.5 | mV | TA = 25°C | 13 | ||
| Linear output drive (sourcing and sinking) | IO(max) | 50 | 64 | mA | TA = 25°C, VO = 1.4 V, RL = 27.5 Ω, VOS < 2 mV, VS+ = 3 V and VS- = -2 V | 12 | |
| Operating voltage | VS | 4.75 | 27 | V | TA = 25°C | 12 | |
| Quiescent current per channel | IQ | 3.05 | 3.6 | 4 | mA | TA = 25°C | 12 |
| Quiescent current per channel | IQ | 2.8 | 4.4 | mA | TA = -40°C to +125°C | 12 | |
| Power supply rejection ratio | PSRR | 80 | 100 | dB | ΔVS = 0.5 V, VCM = 0.5 V | 12 | |
| Total supply voltage (total bipolar supplies) | VS | -14 | 14 | V | 4 | ||
| Differential input voltage | VIN,Diff | -7 | 7 | V | 4 | ||
| Continuous input current | II | -10 | 10 | mA | 4 | ||
| Continuous output current | IO | -40 | 40 | mA | TA = -40°C to +85°C | 4 | |
| Continuous output current | IO | -12 | 12 | mA | TA = 125°C | 4 | |
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 125 | °C | 4 | ||
| Total supply voltage | VS | 4.75 | 27 | V | 4 | ||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 4 | |
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | 177.2 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | 64.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | 99 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DGK, VSSOP) | ψJT | 9.7 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DGK, VSSOP) | ψJB | 97.3 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OPA2810IDGKT - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2810idgkt-etched.step/opa2810idgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2810idgkt.step/opa2810idgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
6ee8a464a8f0bd03, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).