Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2810IDGKT

Texas Instruments · Operational Amplifier · VSSOP-8

OPA2810IDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VO1 output Amplifier 1 output pin.
2 VIN1- input Amplifier 1 inverting input pin.
3 VIN1+ input Amplifier 1 noninverting input pin.
4 VS- power_in Negative power supply pin; total supply VS = VS+ - VS- is 4.75 V to 27 V per the Recommended Operating Conditions.
5 VIN2+ input Amplifier 2 noninverting input pin.
6 VIN2- input Amplifier 2 inverting input pin.
7 VO2 output Amplifier 2 output pin.
8 VS+ power_in Positive power supply pin; total supply VS = VS+ - VS- is 4.75 V to 27 V per the Recommended Operating Conditions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Open-loop voltage gain AOL 104 118 dB f = DC, Vo = 1.25 V to 3.25 V 11
Input offset voltage VOS 0.1 1.5 mV TA = 25°C, no-load 11
Input bias current IB 2 20 pA TA = 25°C 12
Input bias current IB 20 50 pA TA = -40°C to +85°C 12
Input bias current IB 100 340 pA TA = -40°C to +125°C 12
Input offset current IOS 1 20 pA TA = 25°C 12
Common-mode rejection ratio CMRR 78 92 dB f = DC, TA = 25°C, VCM = 0.75 V to 1.75 V 12
Allowable input differential voltage -5 5 V See Figure 57 12
Open-loop voltage gain (auxiliary CMOS input stage) 80 100 dB VCM = VS+, 1 V, f = DC, Vo = 1.5 V to 2.5 V 13
Input bias current (auxiliary CMOS input stage) IB 2 20 pA VCM = VS+, 1.5 V 13
Input bias current (auxiliary CMOS input stage) IB 0.15 0.5 nA VCM = VS+, 1.5 V, TA = -40°C to +125°C 13
Input offset voltage mismatch 0.1 2.5 mV TA = 25°C 13
Linear output drive (sourcing and sinking) IO(max) 50 64 mA TA = 25°C, VO = 1.4 V, RL = 27.5 Ω, VOS < 2 mV, VS+ = 3 V and VS- = -2 V 12
Operating voltage VS 4.75 27 V TA = 25°C 12
Quiescent current per channel IQ 3.05 3.6 4 mA TA = 25°C 12
Quiescent current per channel IQ 2.8 4.4 mA TA = -40°C to +125°C 12
Power supply rejection ratio PSRR 80 100 dB ΔVS = 0.5 V, VCM = 0.5 V 12
Total supply voltage (total bipolar supplies) VS -14 14 V 4
Differential input voltage VIN,Diff -7 7 V 4
Continuous input current II -10 10 mA 4
Continuous output current IO -40 40 mA TA = -40°C to +85°C 4
Continuous output current IO -12 12 mA TA = 125°C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 125 °C 4
Total supply voltage VS 4.75 27 V 4
Ambient temperature TA -40 25 125 °C 4
Junction-to-ambient thermal resistance (DGK, VSSOP) RθJA 177.2 °C/W 4
Junction-to-case (top) thermal resistance (DGK, VSSOP) RθJC(top) 64.6 °C/W 4
Junction-to-board thermal resistance (DGK, VSSOP) RθJB 99 °C/W 4
Junction-to-top characterization parameter (DGK, VSSOP) ψJT 9.7 °C/W 4
Junction-to-board characterization parameter (DGK, VSSOP) ψJB 97.3 °C/W 4

CAD (KiCad official)

  • Symbol: OPA2810IDGKT
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa2810idgkt-etched.step / opa2810idgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2810idgkt.step / opa2810idgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 6ee8a464a8f0bd03, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF