main
Ray Publish 0.1.0 deaf07c

OPA2607QDGKRQ1

Texas Instruments · Operational Amplifier · VSSOP-8

OPA2607QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Channel 1 output, which swings rail-to-rail to within 8 mV (typical) and 12 mV (maximum) of the supply rails per the output voltage swing specification.
2 IN1- input Channel 1 inverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V.
3 IN1+ input Channel 1 noninverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V.
4 VS- power_in Negative (lowest) supply or ground; used as ground for single-supply operation, with total supply (VS+) - (VS-) of 2.2 V to 5.5 V.
5 IN2+ input Channel 2 noninverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V.
6 IN2- input Channel 2 inverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V.
7 OUT2 output Channel 2 output, which swings rail-to-rail to within 8 mV (typical) and 12 mV (maximum) of the supply rails per the output voltage swing specification.
8 VS+ power_in Positive (highest) supply; total supply (VS+) - (VS-) must be between 2.2 V and 5.5 V, and the absolute maximum supply voltage is 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VS+), (VS-) Vs 6 V 5
Differential input voltage VID -5 5 V 5
Continuous input current II -10 10 mA 5
Continuous output current IO -20 20 mA Short-circuit to ground, one amplifier per package 5
Maximum junction temperature TJ 150 °C 5
Operating free-air temperature TA -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
Human-body model (HBM) ESD V(ESD) -2000 2000 V Per AEC Q100-002 5
Charged-device model (CDM) ESD V(ESD) -1000 1000 V Per AEC Q100-011 5
Supply voltage (VS+), (VS-) VS 2.2 5.5 V 5
Supply voltage, split supply (±VS) VS 1.1 2.75 V Split supply, printed as ±1.1 V to ±2.75 V 5
Ambient operating temperature TA -40 25 125 °C 5
Input offset voltage VOS -0.6 0.1 0.6 mV 6
Input offset voltage VOS -0.7 0.1 0.7 mV TA = -40°C to +125°C 6
Input offset voltage drift dVOS/dT -1.5 0.3 1.5 µV/°C TA = -40°C to +125°C 6
Power-supply rejection ratio PSRR 95 110 dB VS = 2.2 V to 5.5 V 6
Power-supply rejection ratio PSRR 95 dB TA = -40°C to +125°C 6
Common-mode rejection ratio CMRR 90 100 dB (VS-) < VCM < (VS+), 1.1 V 6
Common-mode rejection ratio CMRR 86 dB TA = -40°C to +125°C 6
Input bias current IB -10 3 10 pA 6
Input offset current IOS -10 3 10 pA 6
Open-loop voltage gain AOL 110 130 dB (VS-)+400 mV<VOUT<(VS+)-400 mV 6
Open-loop voltage gain AOL 100 dB TA = -40°C to +125°C 6
Output voltage swing from supply rails 8 12 mV 7
Output voltage swing from supply rails 12 mV TA = -40°C to +125°C 7
Quiescent current per amplifier IQ 900 1100 µA IO = 0 mA 7
Quiescent current per amplifier IQ 1200 µA TA = -40°C to +125°C 7
Junction-to-ambient thermal resistance (DGK, 8 pins) RθJA 179 °C/W 5
Junction-to-case (top) thermal resistance (DGK, 8 pins) RθJC(top) 71 °C/W 5
Junction-to-board thermal resistance (DGK, 8 pins) RθJB 101 °C/W 5
Junction-to-top characterization parameter (DGK, 8 pins) ψJT 13.7 °C/W 5
Junction-to-board characterization parameter (DGK, 8 pins) ψJB 100 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PA6 PART NUMBER PACKAGE BODY SIZE (NOM) OPA607-Q1 SOT23 (5) 2.90 mm × 1.60 mm 1

CAD (KiCad official)

  • Symbol: OPA2607QDGKRQ1
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa2607qdgkrq1-etched.step / opa2607qdgkrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2607qdgkrq1.step / opa2607qdgkrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 e22be5868b44206b, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF