Generated by kicad-footprint-generator · KiCad file format 20260206
OPA2607QDGKRQ1
Texas Instruments · Operational Amplifier · VSSOP-8
OPA2607QDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Channel 1 output, which swings rail-to-rail to within 8 mV (typical) and 12 mV (maximum) of the supply rails per the output voltage swing specification. |
| 2 | IN1- | input | Channel 1 inverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V. |
| 3 | IN1+ | input | Channel 1 noninverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V. |
| 4 | VS- | power_in | Negative (lowest) supply or ground; used as ground for single-supply operation, with total supply (VS+) - (VS-) of 2.2 V to 5.5 V. |
| 5 | IN2+ | input | Channel 2 noninverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V. |
| 6 | IN2- | input | Channel 2 inverting input; input voltage must stay within the absolute maximum range of (VS-) - 0.5 V to (VS+) + 0.5 V, and the common-mode range is (VS-) to (VS+) - 1.1 V. |
| 7 | OUT2 | output | Channel 2 output, which swings rail-to-rail to within 8 mV (typical) and 12 mV (maximum) of the supply rails per the output voltage swing specification. |
| 8 | VS+ | power_in | Positive (highest) supply; total supply (VS+) - (VS-) must be between 2.2 V and 5.5 V, and the absolute maximum supply voltage is 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VS+), (VS-) | Vs | 6 | V | 5 | |||
| Differential input voltage | VID | -5 | 5 | V | 5 | ||
| Continuous input current | II | -10 | 10 | mA | 5 | ||
| Continuous output current | IO | -20 | 20 | mA | Short-circuit to ground, one amplifier per package | 5 | |
| Maximum junction temperature | TJ | 150 | °C | 5 | |||
| Operating free-air temperature | TA | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Human-body model (HBM) ESD | V(ESD) | -2000 | 2000 | V | Per AEC Q100-002 | 5 | |
| Charged-device model (CDM) ESD | V(ESD) | -1000 | 1000 | V | Per AEC Q100-011 | 5 | |
| Supply voltage (VS+), (VS-) | VS | 2.2 | 5.5 | V | 5 | ||
| Supply voltage, split supply (±VS) | VS | 1.1 | 2.75 | V | Split supply, printed as ±1.1 V to ±2.75 V | 5 | |
| Ambient operating temperature | TA | -40 | 25 | 125 | °C | 5 | |
| Input offset voltage | VOS | -0.6 | 0.1 | 0.6 | mV | 6 | |
| Input offset voltage | VOS | -0.7 | 0.1 | 0.7 | mV | TA = -40°C to +125°C | 6 |
| Input offset voltage drift | dVOS/dT | -1.5 | 0.3 | 1.5 | µV/°C | TA = -40°C to +125°C | 6 |
| Power-supply rejection ratio | PSRR | 95 | 110 | dB | VS = 2.2 V to 5.5 V | 6 | |
| Power-supply rejection ratio | PSRR | 95 | dB | TA = -40°C to +125°C | 6 | ||
| Common-mode rejection ratio | CMRR | 90 | 100 | dB | (VS-) < VCM < (VS+), 1.1 V | 6 | |
| Common-mode rejection ratio | CMRR | 86 | dB | TA = -40°C to +125°C | 6 | ||
| Input bias current | IB | -10 | 3 | 10 | pA | 6 | |
| Input offset current | IOS | -10 | 3 | 10 | pA | 6 | |
| Open-loop voltage gain | AOL | 110 | 130 | dB | (VS-)+400 mV<VOUT<(VS+)-400 mV | 6 | |
| Open-loop voltage gain | AOL | 100 | dB | TA = -40°C to +125°C | 6 | ||
| Output voltage swing from supply rails | 8 | 12 | mV | 7 | |||
| Output voltage swing from supply rails | 12 | mV | TA = -40°C to +125°C | 7 | |||
| Quiescent current per amplifier | IQ | 900 | 1100 | µA | IO = 0 mA | 7 | |
| Quiescent current per amplifier | IQ | 1200 | µA | TA = -40°C to +125°C | 7 | ||
| Junction-to-ambient thermal resistance (DGK, 8 pins) | RθJA | 179 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DGK, 8 pins) | RθJC(top) | 71 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DGK, 8 pins) | RθJB | 101 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DGK, 8 pins) | ψJT | 13.7 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DGK, 8 pins) | ψJB | 100 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PA6 | PART NUMBER PACKAGE BODY SIZE (NOM) OPA607-Q1 SOT23 (5) 2.90 mm × 1.60 mm | 1 |
CAD (KiCad official)
- Symbol:
OPA2607QDGKRQ1 - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2607qdgkrq1-etched.step/opa2607qdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2607qdgkrq1.step/opa2607qdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
e22be5868b44206b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).