main
Ray
Publish 0.1.0
7bb1655
OPA2137EA
The maker sells this part only as OPA2137EA/2K5 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.17; /250 Obsolete)). The DigiKey and Mouser numbers on this page are for OPA2137EA/2K5.
Texas Instruments · FET Input Amplifiers · VSSOP-8
OPA2137EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of amplifier A, which swings from (V-) + 1.2 V to (V+) - 1.1 V into 10 kΩ at VS = ±15 V. |
| 2 | -In A | input | Inverting input of amplifier A, diode-clamped to the supply rails with input current limited to 2 mA. |
| 3 | +In A | input | Non-inverting input of amplifier A, with a common-mode range from (V-) + 3 V to (V+). |
| 4 | V- | power_in | Negative supply, with total supply (V+) - (V-) of ±2.25 V to ±18 V dual (4.5 V to 36 V single), or ground in single-supply use. |
| 5 | +In B | input | Non-inverting input of amplifier B, with a common-mode range from (V-) + 3 V to (V+). |
| 6 | -In B | input | Inverting input of amplifier B, diode-clamped to the supply rails with input current limited to 2 mA. |
| 7 | Out B | output | Output of amplifier B, which swings from (V-) + 1.2 V to (V+) - 1.1 V into 10 kΩ at VS = ±15 V. |
| 8 | V+ | power_in | Positive supply, with total supply of ±2.25 V to ±18 V dual (4.5 V to 36 V single), bypassed with a 10 nF or larger ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -10 | 0.3 | 10 | mV | 5 | |
| Input offset voltage over temperature | VOS | -15 | 15 | mV | TA = -40°C 至 +85°C | 5 | |
| Power supply rejection ratio | PSRR | -250 | 0.1 | 250 | µV/V | VS = ±3V 至 ±18V | 5 |
| Power supply rejection ratio over temperature | PSRR | -250 | 250 | µV/V | TA = -40°C 至 +85°C | 5 | |
| Common-mode rejection ratio | CMRR | 70 | dB | VCM = -12V 至 13V | 5 | ||
| Common-mode rejection ratio over temperature | CMRR | 70 | dB | TA = -40°C 至 +85°C | 5 | ||
| Open-loop voltage gain | AOL | 86 | 94 | dB | VO = -13.8V 至 13.9V | 5 | |
| Open-loop voltage gain over temperature | AOL | 86 | dB | TA = -40°C 至 +85°C | 5 | ||
| Dual supply voltage range | VS | 2.25 | 18 | V | 双电源 | 6 | |
| Single supply voltage range | VS | 4.5 | 36 | V | 单电源 | 6 | |
| Quiescent current | IQ | 120 | 270 | µA | IO = 0 | 6 | |
| Quiescent current over temperature | IQ | 375 | µA | TA= -40°C 至 +85°C | 6 | ||
| Short-circuit current | ISC | -25 | 60 | mA | 6 | ||
| Input offset voltage drift | dVOS/dT | 0.6 | µV/°C | TA = -40°C 至 +85°C | 5 | ||
| Channel separation (dual, quad) | 5 | µV/V | 直流 | 5 | |||
| Input bias current | IB | 10 | pA | VCM = 0V | 5 | ||
| Input offset current | IOS | 5 | pA | 5 | |||
| Input voltage noise, 0.1 Hz to 10 Hz | en | 6 | µVp-p | f = 0.1Hz 至 10Hz | 5 | ||
| Input voltage noise density | en | 30 | nV/√Hz | f = 1kHz | 5 | ||
| Current noise density | in | 2 | fA/√Hz | f = 1kHz | 5 | ||
| Gain-bandwidth product | GBW | 1.1 | MHz | 6 | |||
| Slew rate | SR | 4.5 | V/µs | G = 1,10V 阶跃,CL = 100pF | 6 | ||
| Settling time to 0.1% | 4 | µs | 6 | ||||
| Settling time to 0.01% | 5 | µs | 6 | ||||
| Overload recovery time | 1 | µs | VIN • G = VS | 6 | |||
| Total harmonic distortion + noise | THD+N | 0.02 | % | G = 1,f = 1kHz,3.5Vrms | 6 | ||
| Capacitive load drive | CLOAD | 330 | pF | 6 | |||
| Open-loop output impedance | ZO | 575 | Ω | f = 1MHz,IO = 0A | 6 | ||
| Supply voltage (dual) absolute maximum | V+ to V- | 36 | V | 4 | |||
| Input voltage | -0.7 | 0.7 | V | 4 | |||
| Input current | 2 | mA | 4 | ||||
| Operating temperature (absolute maximum) | -55 | 125 | °C | 4 | |||
| Storage temperature | -55 | 125 | °C | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Lead temperature (soldering) | 300 | °C | 焊接,10s | 4 | |||
| ESD human body model | V(ESD) | -2000 | 2000 | V | HBM,ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD charged device model | V(ESD) | -1000 | 1000 | V | CDM,JEDEC JESD22-C101 | 4 | |
| Supply voltage (recommended) | VS | 2.25 | 36 | V | (V+), (V-) | 5 | |
| Input voltage range (recommended) | VI | -3 | 3 | V | 5 | ||
| Rated ambient temperature | TA | -40 | 85 | °C | 5 |
CAD (KiCad official)
- Symbol:
OPA2137EA - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa2137ea-etched.step/opa2137ea-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2137ea.step/opa2137ea.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
8b2fe6bd5f1aedcd, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA2137EA
> The maker sells this part only as OPA2137EA/2K5 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.17; /250 Obsolete)). The DigiKey and Mouser numbers on this page are for OPA2137EA/2K5.
**Texas Instruments** · FET Input Amplifiers · VSSOP-8
OPA2137EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out A | output | Output of amplifier A, which swings from (V-) + 1.2 V to (V+) - 1.1 V into 10 kΩ at VS = ±15 V. |
| 2 | -In A | input | Inverting input of amplifier A, diode-clamped to the supply rails with input current limited to 2 mA. |
| 3 | +In A | input | Non-inverting input of amplifier A, with a common-mode range from (V-) + 3 V to (V+). |
| 4 | V- | power_in | Negative supply, with total supply (V+) - (V-) of ±2.25 V to ±18 V dual (4.5 V to 36 V single), or ground in single-supply use. |
| 5 | +In B | input | Non-inverting input of amplifier B, with a common-mode range from (V-) + 3 V to (V+). |
| 6 | -In B | input | Inverting input of amplifier B, diode-clamped to the supply rails with input current limited to 2 mA. |
| 7 | Out B | output | Output of amplifier B, which swings from (V-) + 1.2 V to (V+) - 1.1 V into 10 kΩ at VS = ±15 V. |
| 8 | V+ | power_in | Positive supply, with total supply of ±2.25 V to ±18 V dual (4.5 V to 36 V single), bypassed with a 10 nF or larger ceramic capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -10 | 0.3 | 10 | mV | | 5 |
| Input offset voltage over temperature | VOS | -15 | | 15 | mV | TA = -40°C 至 +85°C | 5 |
| Power supply rejection ratio | PSRR | -250 | 0.1 | 250 | µV/V | VS = ±3V 至 ±18V | 5 |
| Power supply rejection ratio over temperature | PSRR | -250 | | 250 | µV/V | TA = -40°C 至 +85°C | 5 |
| Common-mode rejection ratio | CMRR | 70 | | | dB | VCM = -12V 至 13V | 5 |
| Common-mode rejection ratio over temperature | CMRR | 70 | | | dB | TA = -40°C 至 +85°C | 5 |
| Open-loop voltage gain | AOL | 86 | 94 | | dB | VO = -13.8V 至 13.9V | 5 |
| Open-loop voltage gain over temperature | AOL | 86 | | | dB | TA = -40°C 至 +85°C | 5 |
| Dual supply voltage range | VS | 2.25 | | 18 | V | 双电源 | 6 |
| Single supply voltage range | VS | 4.5 | | 36 | V | 单电源 | 6 |
| Quiescent current | IQ | | 120 | 270 | µA | IO = 0 | 6 |
| Quiescent current over temperature | IQ | | | 375 | µA | TA= -40°C 至 +85°C | 6 |
| Short-circuit current | ISC | -25 | | 60 | mA | | 6 |
| Input offset voltage drift | dVOS/dT | | 0.6 | | µV/°C | TA = -40°C 至 +85°C | 5 |
| Channel separation (dual, quad) | | | 5 | | µV/V | 直流 | 5 |
| Input bias current | IB | | 10 | | pA | VCM = 0V | 5 |
| Input offset current | IOS | | 5 | | pA | | 5 |
| Input voltage noise, 0.1 Hz to 10 Hz | en | | 6 | | µVp-p | f = 0.1Hz 至 10Hz | 5 |
| Input voltage noise density | en | | 30 | | nV/√Hz | f = 1kHz | 5 |
| Current noise density | in | | 2 | | fA/√Hz | f = 1kHz | 5 |
| Gain-bandwidth product | GBW | | 1.1 | | MHz | | 6 |
| Slew rate | SR | | 4.5 | | V/µs | G = 1,10V 阶跃,CL = 100pF | 6 |
| Settling time to 0.1% | | | 4 | | µs | | 6 |
| Settling time to 0.01% | | | 5 | | µs | | 6 |
| Overload recovery time | | | 1 | | µs | VIN • G = VS | 6 |
| Total harmonic distortion + noise | THD+N | | 0.02 | | % | G = 1,f = 1kHz,3.5Vrms | 6 |
| Capacitive load drive | CLOAD | | 330 | | pF | | 6 |
| Open-loop output impedance | ZO | | 575 | | Ω | f = 1MHz,IO = 0A | 6 |
| Supply voltage (dual) absolute maximum | V+ to V- | | | 36 | V | | 4 |
| Input voltage | | -0.7 | | 0.7 | V | | 4 |
| Input current | | | | 2 | mA | | 4 |
| Operating temperature (absolute maximum) | | -55 | | 125 | °C | | 4 |
| Storage temperature | | -55 | | 125 | °C | | 4 |
| Junction temperature | | | | 150 | °C | | 4 |
| Lead temperature (soldering) | | | | 300 | °C | 焊接,10s | 4 |
| ESD human body model | V(ESD) | -2000 | | 2000 | V | HBM,ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD charged device model | V(ESD) | -1000 | | 1000 | V | CDM,JEDEC JESD22-C101 | 4 |
| Supply voltage (recommended) | VS | 2.25 | | 36 | V | (V+), (V-) | 5 |
| Input voltage range (recommended) | VI | -3 | | 3 | V | | 5 |
| Rated ambient temperature | TA | -40 | | 85 | °C | | 5 |
## CAD (KiCad official)
- Symbol: `OPA2137EA`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `opa2137ea-etched.step` / `opa2137ea-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa2137ea.step` / `opa2137ea.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa2137) (23 pp, sha256 `8b2fe6bd5f1aedcd`, retrieved 2026-11-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa2137ea-datasheet.pdf)