Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2137EA

The maker sells this part only as OPA2137EA/2K5 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.17; /250 Obsolete)). The DigiKey and Mouser numbers on this page are for OPA2137EA/2K5.

Texas Instruments · FET Input Amplifiers · VSSOP-8

OPA2137EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Out A output Output of amplifier A, which swings from (V-) + 1.2 V to (V+) - 1.1 V into 10 kΩ at VS = ±15 V.
2 -In A input Inverting input of amplifier A, diode-clamped to the supply rails with input current limited to 2 mA.
3 +In A input Non-inverting input of amplifier A, with a common-mode range from (V-) + 3 V to (V+).
4 V- power_in Negative supply, with total supply (V+) - (V-) of ±2.25 V to ±18 V dual (4.5 V to 36 V single), or ground in single-supply use.
5 +In B input Non-inverting input of amplifier B, with a common-mode range from (V-) + 3 V to (V+).
6 -In B input Inverting input of amplifier B, diode-clamped to the supply rails with input current limited to 2 mA.
7 Out B output Output of amplifier B, which swings from (V-) + 1.2 V to (V+) - 1.1 V into 10 kΩ at VS = ±15 V.
8 V+ power_in Positive supply, with total supply of ±2.25 V to ±18 V dual (4.5 V to 36 V single), bypassed with a 10 nF or larger ceramic capacitor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -10 0.3 10 mV 5
Input offset voltage over temperature VOS -15 15 mV TA = -40°C 至 +85°C 5
Power supply rejection ratio PSRR -250 0.1 250 µV/V VS = ±3V 至 ±18V 5
Power supply rejection ratio over temperature PSRR -250 250 µV/V TA = -40°C 至 +85°C 5
Common-mode rejection ratio CMRR 70 dB VCM = -12V 至 13V 5
Common-mode rejection ratio over temperature CMRR 70 dB TA = -40°C 至 +85°C 5
Open-loop voltage gain AOL 86 94 dB VO = -13.8V 至 13.9V 5
Open-loop voltage gain over temperature AOL 86 dB TA = -40°C 至 +85°C 5
Dual supply voltage range VS 2.25 18 V 双电源 6
Single supply voltage range VS 4.5 36 V 单电源 6
Quiescent current IQ 120 270 µA IO = 0 6
Quiescent current over temperature IQ 375 µA TA= -40°C 至 +85°C 6
Short-circuit current ISC -25 60 mA 6
Input offset voltage drift dVOS/dT 0.6 µV/°C TA = -40°C 至 +85°C 5
Channel separation (dual, quad) 5 µV/V 直流 5
Input bias current IB 10 pA VCM = 0V 5
Input offset current IOS 5 pA 5
Input voltage noise, 0.1 Hz to 10 Hz en 6 µVp-p f = 0.1Hz 至 10Hz 5
Input voltage noise density en 30 nV/√Hz f = 1kHz 5
Current noise density in 2 fA/√Hz f = 1kHz 5
Gain-bandwidth product GBW 1.1 MHz 6
Slew rate SR 4.5 V/µs G = 1,10V 阶跃,CL = 100pF 6
Settling time to 0.1% 4 µs 6
Settling time to 0.01% 5 µs 6
Overload recovery time 1 µs VIN • G = VS 6
Total harmonic distortion + noise THD+N 0.02 % G = 1,f = 1kHz,3.5Vrms 6
Capacitive load drive CLOAD 330 pF 6
Open-loop output impedance ZO 575 Ω f = 1MHz,IO = 0A 6
Supply voltage (dual) absolute maximum V+ to V- 36 V 4
Input voltage -0.7 0.7 V 4
Input current 2 mA 4
Operating temperature (absolute maximum) -55 125 °C 4
Storage temperature -55 125 °C 4
Junction temperature 150 °C 4
Lead temperature (soldering) 300 °C 焊接,10s 4
ESD human body model V(ESD) -2000 2000 V HBM,ANSI/ESDA/JEDEC JS-001 4
ESD charged device model V(ESD) -1000 1000 V CDM,JEDEC JESD22-C101 4
Supply voltage (recommended) VS 2.25 36 V (V+), (V-) 5
Input voltage range (recommended) VI -3 3 V 5
Rated ambient temperature TA -40 85 °C 5

CAD (KiCad official)

  • Symbol: OPA2137EA
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa2137ea-etched.step / opa2137ea-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2137ea.step / opa2137ea.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 8b2fe6bd5f1aedcd, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF