Generated by kicad-footprint-generator · KiCad file format 20260206
OPA211IDGKT
Texas Instruments · Precision OpAmps · VSSOP-8
OPA211IDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; this pin can be left floating or connected to any voltage between (V-) and (V+). |
| 2 | -IN | input | Inverting input of the amplifier. |
| 3 | +IN | input | Noninverting input of the amplifier. |
| 4 | V- | power_in | Negative power supply; the datasheet specifies supply voltage VS = (V+) - (V-) of 4.5 V (±2.25 V) minimum to 36 V (±18 V) maximum. |
| 5 | NC | unconnected | No internal connection; this pin can be left floating or connected to any voltage between (V-) and (V+). |
| 6 | OUT | output | Amplifier output, which swings rail-to-rail and enters a high-impedance state when the device is disabled. |
| 7 | V+ | power_in | Positive power supply; the datasheet specifies supply voltage VS = (V+) - (V-) of 4.5 V (±2.25 V) minimum to 36 V (±18 V) maximum. |
| 8 | Shutdown | input | Active-high shutdown: the device is enabled when (V-) ≤ VSHUTDOWN ≤ (V+) - 3 V and disabled when VSHUTDOWN ≥ (V+) - 0.35 V, and the pin must be driven to a valid level and not left open. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -50 | 20 | 50 | μV | VS = ±15 V | 10 |
| Input offset drift | dVOS/dT | -0.85 | 0.15 | 0.85 | μV/°C | VS = ±15 V, TA = -40°C to +125°C | 10 |
| Input offset voltage vs power supply | PSRR | 0.1 | 0.5 | μV/V | TA = 25°C | 10 | |
| Input offset voltage vs power supply | PSRR | 3 | μV/V | TA = -40°C to +125°C | 10 | ||
| Input bias current | IB | -125 | 50 | 125 | nA | VCM = 0 V | 10 |
| Input bias current | IB | -200 | 200 | nA | VCM = 0 V, TA = -40°C to +125°C | 10 | |
| Input offset current | IOS | -75 | 20 | 75 | nA | VCM = 0 V | 10 |
| Input offset current | IOS | -150 | 150 | nA | TA = -40°C to +125°C | 10 | |
| Common-mode rejection ratio | CMRR | 114 | 120 | dB | VS ≥ ±5 V, (V-) + 2 V ≤ VCM ≤ (V+), 2 V, TA = -40°C to +125°C | 10 | |
| Common-mode rejection ratio | CMRR | 110 | 120 | dB | VS < ±5 V, (V-) + 2 V ≤ VCM ≤ (V+), 2 V, TA = -40°C to +125°C | 10 | |
| Open-loop voltage gain | AOL | 114 | 130 | dB | (V-) + 0.2 V ≤ VO ≤ (V+), 0.2 V, RL = 10 kΩ, TA = -40°C to +125°C | 10 | |
| Open-loop voltage gain | AOL | 110 | 114 | dB | (V-) + 0.6 V ≤ VO ≤ (V+), 0.6 V, RL = 600 Ω | 10 | |
| Open-loop voltage gain | AOL | 110 | dB | OPA211: (V-) + 0.6 V ≤ VO ≤ (V+), 0.6 V, IO ≤ 15 mA, TA = -40°C to +125°C | 10 | ||
| Open-loop voltage gain | AOL | 103 | dB | OPA211: (V-) + 0.6 V ≤ VO ≤ (V+), 0.6 V, 15 mA < IO ≤ 30 mA, TA = -40°C to +125°C | 10 | ||
| Short-circuit current | ISC | -45 | 30 | mA | 11 | ||
| Shutdown current | 1 | 20 | μA | Shutdown (disabled) | 11 | ||
| Quiescent current (per channel) | IQ | 3.6 | 4.5 | mA | IOUT = 0 A | 11 | |
| Quiescent current (per channel) | IQ | 6 | mA | IOUT = 0 A, TA = -40°C to +125°C | 11 | ||
| Supply voltage (VS = (V+), (V-)) | VS | 4.5 | 36 | V | 6 | ||
| Specified temperature | TA | -40 | 25 | 125 | °C | 6 | |
| Supply voltage (VS = (V+), (V-)) | VS | 40 | V | 6 | |||
| Input current (any pin except power-supply pins) | -10 | 10 | mA | 6 | |||
| Operating temperature | TA | -55 | 150 | °C | 6 | ||
| Junction temperature | TJ | 200 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | 184.9 | °C/W | High-K board | 7 | ||
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | 71.2 | °C/W | 7 | |||
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | 104.9 | °C/W | 7 | |||
| Junction-to-top characterization parameter (DGK, VSSOP) | ψJT | 11.5 | °C/W | 7 | |||
| Junction-to-board characterization parameter (DGK, VSSOP) | ψJB | 103.4 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
OPA211IDGKT - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa211idgkt-etched.step/opa211idgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa211idgkt.step/opa211idgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
2415597a36a2108b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).