Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA211IDGKT

Texas Instruments · Precision OpAmps · VSSOP-8

OPA211IDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; this pin can be left floating or connected to any voltage between (V-) and (V+).
2 -IN input Inverting input of the amplifier.
3 +IN input Noninverting input of the amplifier.
4 V- power_in Negative power supply; the datasheet specifies supply voltage VS = (V+) - (V-) of 4.5 V (±2.25 V) minimum to 36 V (±18 V) maximum.
5 NC unconnected No internal connection; this pin can be left floating or connected to any voltage between (V-) and (V+).
6 OUT output Amplifier output, which swings rail-to-rail and enters a high-impedance state when the device is disabled.
7 V+ power_in Positive power supply; the datasheet specifies supply voltage VS = (V+) - (V-) of 4.5 V (±2.25 V) minimum to 36 V (±18 V) maximum.
8 Shutdown input Active-high shutdown: the device is enabled when (V-) ≤ VSHUTDOWN ≤ (V+) - 3 V and disabled when VSHUTDOWN ≥ (V+) - 0.35 V, and the pin must be driven to a valid level and not left open.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -50 20 50 μV VS = ±15 V 10
Input offset drift dVOS/dT -0.85 0.15 0.85 μV/°C VS = ±15 V, TA = -40°C to +125°C 10
Input offset voltage vs power supply PSRR 0.1 0.5 μV/V TA = 25°C 10
Input offset voltage vs power supply PSRR 3 μV/V TA = -40°C to +125°C 10
Input bias current IB -125 50 125 nA VCM = 0 V 10
Input bias current IB -200 200 nA VCM = 0 V, TA = -40°C to +125°C 10
Input offset current IOS -75 20 75 nA VCM = 0 V 10
Input offset current IOS -150 150 nA TA = -40°C to +125°C 10
Common-mode rejection ratio CMRR 114 120 dB VS ≥ ±5 V, (V-) + 2 V ≤ VCM ≤ (V+), 2 V, TA = -40°C to +125°C 10
Common-mode rejection ratio CMRR 110 120 dB VS < ±5 V, (V-) + 2 V ≤ VCM ≤ (V+), 2 V, TA = -40°C to +125°C 10
Open-loop voltage gain AOL 114 130 dB (V-) + 0.2 V ≤ VO ≤ (V+), 0.2 V, RL = 10 kΩ, TA = -40°C to +125°C 10
Open-loop voltage gain AOL 110 114 dB (V-) + 0.6 V ≤ VO ≤ (V+), 0.6 V, RL = 600 Ω 10
Open-loop voltage gain AOL 110 dB OPA211: (V-) + 0.6 V ≤ VO ≤ (V+), 0.6 V, IO ≤ 15 mA, TA = -40°C to +125°C 10
Open-loop voltage gain AOL 103 dB OPA211: (V-) + 0.6 V ≤ VO ≤ (V+), 0.6 V, 15 mA < IO ≤ 30 mA, TA = -40°C to +125°C 10
Short-circuit current ISC -45 30 mA 11
Shutdown current 1 20 μA Shutdown (disabled) 11
Quiescent current (per channel) IQ 3.6 4.5 mA IOUT = 0 A 11
Quiescent current (per channel) IQ 6 mA IOUT = 0 A, TA = -40°C to +125°C 11
Supply voltage (VS = (V+), (V-)) VS 4.5 36 V 6
Specified temperature TA -40 25 125 °C 6
Supply voltage (VS = (V+), (V-)) VS 40 V 6
Input current (any pin except power-supply pins) -10 10 mA 6
Operating temperature TA -55 150 °C 6
Junction temperature TJ 200 °C 6
Storage temperature Tstg -65 150 °C 6
Junction-to-ambient thermal resistance (DGK, VSSOP) RθJA 184.9 °C/W High-K board 7
Junction-to-case (top) thermal resistance (DGK, VSSOP) RθJC(top) 71.2 °C/W 7
Junction-to-board thermal resistance (DGK, VSSOP) RθJB 104.9 °C/W 7
Junction-to-top characterization parameter (DGK, VSSOP) ψJT 11.5 °C/W 7
Junction-to-board characterization parameter (DGK, VSSOP) ψJB 103.4 °C/W 7

CAD (KiCad official)

  • Symbol: OPA211IDGKT
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa211idgkt-etched.step / opa211idgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa211idgkt.step / opa211idgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 2415597a36a2108b, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF