main
Ray
opa177gs: laser-etched CAD + chip hero (factory 2.0.0 backfill)
b840db2
OPA177GS
Texas Instruments · Precision OpAmps · SOP-8-150mil
OPA177GS from Texas Instruments, in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset Trim | passive | Offset voltage trim terminal. Connect a 14 kΩ potentiometer between pins 1 and 8 with the wiper to V+ to null residual input offset voltage. Leave open if trimming is not required (laser-trimmed factory offset is 25 µV max). |
| 2 | -In | input | Inverting analog input of the op amp. High-impedance input (differential mode 45 MΩ typ, common-mode 200 GΩ typ); common-mode input range ±13 V min at ±15 V supplies. |
| 3 | +In | input | Non-inverting analog input of the op amp. High-impedance input (differential mode 45 MΩ typ, common-mode 200 GΩ typ); common-mode input range ±13 V min at ±15 V supplies. |
| 4 | V- | power_in | Negative supply rail. Typically -15 V; absolute maximum supply voltage is ±22 V. Bypass to ground with a local ceramic capacitor. |
| 5 | NC | unconnected | No internal connection. Leave floating or optionally tie to ground; not connected to any internal circuitry. |
| 6 | Vo | output | Op amp output. Output voltage swing typically ±14 V with RL ≥ 10 kΩ at ±15 V supplies; open-loop output resistance ~60 Ω. Short-circuit protected (continuous). |
| 7 | V+ | power_in | Positive supply rail. Typically +15 V; absolute maximum supply voltage is ±22 V. Bypass to ground with a local ceramic capacitor. |
| 8 | Offset Trim | passive | Offset voltage trim terminal. Connect a 14 kΩ potentiometer between pins 1 and 8 with the wiper to V+ to null residual input offset voltage. Leave open if trimming is not required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOP-8-150mil |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
OPA177GSOPA177GSFPOPA177GSGP
CAD (KiCad official)
- Symbol:
OPA177GS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8-150mil (KiCad packages3D, STEP)
- 3D model files:
opa177gs-etched.step/opa177gs-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa177gs.step/opa177gs.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (11 pp, sha256
3b66b8aecb3faa33, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA177GS
**Texas Instruments** · Precision OpAmps · SOP-8-150mil
OPA177GS from Texas Instruments, in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset Trim | passive | Offset voltage trim terminal. Connect a 14 kΩ potentiometer between pins 1 and 8 with the wiper to V+ to null residual input offset voltage. Leave open if trimming is not required (laser-trimmed factory offset is 25 µV max). |
| 2 | -In | input | Inverting analog input of the op amp. High-impedance input (differential mode 45 MΩ typ, common-mode 200 GΩ typ); common-mode input range ±13 V min at ±15 V supplies. |
| 3 | +In | input | Non-inverting analog input of the op amp. High-impedance input (differential mode 45 MΩ typ, common-mode 200 GΩ typ); common-mode input range ±13 V min at ±15 V supplies. |
| 4 | V- | power_in | Negative supply rail. Typically -15 V; absolute maximum supply voltage is ±22 V. Bypass to ground with a local ceramic capacitor. |
| 5 | NC | unconnected | No internal connection. Leave floating or optionally tie to ground; not connected to any internal circuitry. |
| 6 | Vo | output | Op amp output. Output voltage swing typically ±14 V with RL ≥ 10 kΩ at ±15 V supplies; open-loop output resistance ~60 Ω. Short-circuit protected (continuous). |
| 7 | V+ | power_in | Positive supply rail. Typically +15 V; absolute maximum supply voltage is ±22 V. Bypass to ground with a local ceramic capacitor. |
| 8 | Offset Trim | passive | Offset voltage trim terminal. Connect a 14 kΩ potentiometer between pins 1 and 8 with the wiper to V+ to null residual input offset voltage. Leave open if trimming is not required. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOP-8-150mil |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `OPA177GS`
- `OPA177GSFP`
- `OPA177GSGP`
## CAD (KiCad official)
- Symbol: `OPA177GS`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8-150mil (KiCad packages3D, STEP)
- 3D model files: `opa177gs-etched.step` / `opa177gs-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa177gs.step` / `opa177gs.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](docs/opa177gs-datasheet.pdf) (11 pp, sha256 `3b66b8aecb3faa33`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa177gs-datasheet.pdf)