main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs opa177gs: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers opa177gs: viewers · Ray
opa177gs-etched.fit.json opa177gs: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
opa177gs-etched.glb opa177gs: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
opa177gs-etched.step opa177gs: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
opa177gs.glb Publish 0.1.0 · Ray
opa177gs.kicad_mod Publish 0.1.0 · Ray
opa177gs.kicad_sym Publish 0.1.0 · Ray
opa177gs.lbr Publish 0.1.0 · Ray
opa177gs.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray
README.md opa177gs: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

OPA177GS

Texas Instruments · Precision OpAmps · SOP-8-150mil

OPA177GS from Texas Instruments, in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Offset Trim passive Offset voltage trim terminal. Connect a 14 kΩ potentiometer between pins 1 and 8 with the wiper to V+ to null residual input offset voltage. Leave open if trimming is not required (laser-trimmed factory offset is 25 µV max).
2 -In input Inverting analog input of the op amp. High-impedance input (differential mode 45 MΩ typ, common-mode 200 GΩ typ); common-mode input range ±13 V min at ±15 V supplies.
3 +In input Non-inverting analog input of the op amp. High-impedance input (differential mode 45 MΩ typ, common-mode 200 GΩ typ); common-mode input range ±13 V min at ±15 V supplies.
4 V- power_in Negative supply rail. Typically -15 V; absolute maximum supply voltage is ±22 V. Bypass to ground with a local ceramic capacitor.
5 NC unconnected No internal connection. Leave floating or optionally tie to ground; not connected to any internal circuitry.
6 Vo output Op amp output. Output voltage swing typically ±14 V with RL ≥ 10 kΩ at ±15 V supplies; open-loop output resistance ~60 Ω. Short-circuit protected (continuous).
7 V+ power_in Positive supply rail. Typically +15 V; absolute maximum supply voltage is ±22 V. Bypass to ground with a local ceramic capacitor.
8 Offset Trim passive Offset voltage trim terminal. Connect a 14 kΩ potentiometer between pins 1 and 8 with the wiper to V+ to null residual input offset voltage. Leave open if trimming is not required.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOP-8-150mil
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • OPA177GS
  • OPA177GSFP
  • OPA177GSGP

CAD (KiCad official)

  • Symbol: OPA177GS
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8-150mil (KiCad packages3D, STEP)
  • 3D model files: opa177gs-etched.step / opa177gs-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa177gs.step / opa177gs.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (11 pp, sha256 3b66b8aecb3faa33, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF