Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
OPA1652AIDRGR
Texas Instruments · Audio Amplifiers · WSON-8-EP(3x3)
OPA1652AIDRGR from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output, which swings rail-to-rail to within 800 mV of the supply rails with a 2-kΩ load and has a high output drive capability of ±30 mA. |
| 2 | -IN A | input | Channel A inverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven. |
| 3 | +IN A | input | Channel A noninverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven. |
| 4 | V- | power_in | Negative (lowest) power supply, with a specified range of ±2.25 V to ±18 V (4.5 V to 36 V total); the exposed thermal pad must be connected to V-. |
| 5 | +IN B | input | Channel B noninverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven. |
| 6 | -IN B | input | Channel B inverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven. |
| 7 | OUT B | output | Channel B output, which swings rail-to-rail to within 800 mV of the supply rails with a 2-kΩ load and has a high output drive capability of ±30 mA. |
| 8 | V+ | power_in | Positive (highest) power supply, with a specified range of ±2.25 V to ±18 V (4.5 V to 36 V total); 0.1-µF bypass capacitors to ground are recommended close to the pin. |
| 9 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 4.5 | 36 | V | Dual supply ±2.25 V to ±18 V | 5 | ||
| Operating temperature | TA | -40 | 85 | °C | 5 | ||
| Supply voltage, VS = (V+), (V-) | VS | 40 | V | 5 | |||
| Input current (all pins except power-supply pins) | -10 | 10 | mA | 5 | |||
| Operating temperature, TA | TA | -55 | 125 | °C | 5 | ||
| Junction temperature, TJ | TJ | 200 | °C | 5 | |||
| Storage temperature, Tstg | Tstg | -65 | 150 | °C | 5 | ||
| Specified supply voltage | VS | 2.25 | 18 | V | Printed as ±2.25 ±18 V | 7 | |
| Input offset voltage | VOS | -1.5 | 0.5 | 1.5 | mV | VS = ±2.25 V to ±18 V | 7 |
| Input offset voltage drift (footnote 2) | 2 | 8 | µV/°C | VS = ±2.25 V to ±18 V, TA = -40°C to 85°C | 7 | ||
| Power-supply rejection ratio | PSRR | 3 | 8 | µV/V | VS = ±2..25 V to ±18 V | 7 | |
| Input bias current | IB | -100 | 10 | 100 | pA | VCM = 0 V | 7 |
| Input offset current | IOS | -100 | 10 | 100 | pA | VCM = 0 V | 7 |
| Common-mode rejection ratio | CMRR | 100 | 110 | dB | 7 | ||
| Open-loop voltage gain | AOL | 106 | 114 | dB | (V-) + 0.8 V ≤ VO ≤ (V+), 0.8 V, RL = 2 kΩ | 7 | |
| Quiescent current (per channel) | IQ | 2 | 2.5 | mA | IOUT = 0 A | 7 | |
| Quiescent current (per channel) | IQ | 2.8 | mA | IOUT = 0 A, TA = -40°C to 85°C | 7 | ||
| Short-circuit current | ISC | -50 | 50 | mA | One channel at a time (footnote 3) | 7 | |
| Specified temperature range | -40 | 85 | °C | 7 | |||
| Operating temperature range | -55 | 125 | °C | 7 | |||
| Thermal resistance, junction-to-ambient (DRG WSON) | RθJA | 66.9 | °C/W | 6 | |||
| Thermal resistance, junction-to-case (top) (DRG WSON) | RθJC(top) | 54.5 | °C/W | 6 | |||
| Thermal resistance, junction-to-board (DRG WSON) | RθJB | 40.4 | °C/W | 6 | |||
| Junction-to-top characterization parameter (DRG WSON) | ψJT | 1.9 | °C/W | 6 | |||
| Junction-to-board characterization parameter (DRG WSON) | ψJB | 40.4 | °C/W | 6 | |||
| Thermal resistance, junction-to-case (bottom) (DRG WSON) | RθJC(bot) | 10.8 | °C/W | 6 | |||
| Gain-bandwidth product | GBW | 18 | MHz | G = 1 | 7 | ||
| Slew rate | SR | 10 | V/µs | G = -1 | 7 | ||
| Full power bandwidth | 1.6 | MHz | VO = 1 VP | 7 | |||
| Overload recovery time | 1 | µs | G = -10 | 7 | |||
| Channel separation (dual and quad) | -120 | dB | f = 1 kHz | 7 | |||
| Input voltage noise | en | 4 | µVPP | f = 20 Hz to 20 kHz | 7 | ||
| Input voltage noise density | en | 4.5 | nV/√Hz | f = 1 kHz | 7 | ||
| Input voltage noise density | en | 3.8 | nV/√Hz | f = 10 kHz | 7 | ||
| Input current noise density | In | 3 | fA/√Hz | f = 1 kHz | 7 | ||
| Total harmonic distortion + noise | THD+N | 5e-05 | % | G = 1, f = 1 kHz, VO = 3 VRMS | 7 | ||
| Total harmonic distortion + noise | THD+N | -126 | dB | G = 1, f = 1 kHz, VO = 3 VRMS | 7 | ||
| Output load capacitance (capacitive load drive) | CLOAD | 100 | pF | 7 |
CAD (KiCad official)
- Symbol:
OPA1652AIDRGR - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
opa1652aidrgr-etched.step/opa1652aidrgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1652aidrgr.step/opa1652aidrgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
819ae541297cdcbd, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).