Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA1652AIDRGR

Texas Instruments · Audio Amplifiers · WSON-8-EP(3x3)

OPA1652AIDRGR from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Channel A output, which swings rail-to-rail to within 800 mV of the supply rails with a 2-kΩ load and has a high output drive capability of ±30 mA.
2 -IN A input Channel A inverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven.
3 +IN A input Channel A noninverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven.
4 V- power_in Negative (lowest) power supply, with a specified range of ±2.25 V to ±18 V (4.5 V to 36 V total); the exposed thermal pad must be connected to V-.
5 +IN B input Channel B noninverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven.
6 -IN B input Channel B inverting input; the common-mode voltage must stay within (V-) + 0.5 V to (V+) - 2 V, and input signal current must be limited to 10 mA or less when the input is overdriven.
7 OUT B output Channel B output, which swings rail-to-rail to within 800 mV of the supply rails with a 2-kΩ load and has a high output drive capability of ±30 mA.
8 V+ power_in Positive (highest) power supply, with a specified range of ±2.25 V to ±18 V (4.5 V to 36 V total); 0.1-µF bypass capacitors to ground are recommended close to the pin.
9 Thermal pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(3x3)
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage 4.5 36 V Dual supply ±2.25 V to ±18 V 5
Operating temperature TA -40 85 °C 5
Supply voltage, VS = (V+), (V-) VS 40 V 5
Input current (all pins except power-supply pins) -10 10 mA 5
Operating temperature, TA TA -55 125 °C 5
Junction temperature, TJ TJ 200 °C 5
Storage temperature, Tstg Tstg -65 150 °C 5
Specified supply voltage VS 2.25 18 V Printed as ±2.25 ±18 V 7
Input offset voltage VOS -1.5 0.5 1.5 mV VS = ±2.25 V to ±18 V 7
Input offset voltage drift (footnote 2) 2 8 µV/°C VS = ±2.25 V to ±18 V, TA = -40°C to 85°C 7
Power-supply rejection ratio PSRR 3 8 µV/V VS = ±2..25 V to ±18 V 7
Input bias current IB -100 10 100 pA VCM = 0 V 7
Input offset current IOS -100 10 100 pA VCM = 0 V 7
Common-mode rejection ratio CMRR 100 110 dB 7
Open-loop voltage gain AOL 106 114 dB (V-) + 0.8 V ≤ VO ≤ (V+), 0.8 V, RL = 2 kΩ 7
Quiescent current (per channel) IQ 2 2.5 mA IOUT = 0 A 7
Quiescent current (per channel) IQ 2.8 mA IOUT = 0 A, TA = -40°C to 85°C 7
Short-circuit current ISC -50 50 mA One channel at a time (footnote 3) 7
Specified temperature range -40 85 °C 7
Operating temperature range -55 125 °C 7
Thermal resistance, junction-to-ambient (DRG WSON) RθJA 66.9 °C/W 6
Thermal resistance, junction-to-case (top) (DRG WSON) RθJC(top) 54.5 °C/W 6
Thermal resistance, junction-to-board (DRG WSON) RθJB 40.4 °C/W 6
Junction-to-top characterization parameter (DRG WSON) ψJT 1.9 °C/W 6
Junction-to-board characterization parameter (DRG WSON) ψJB 40.4 °C/W 6
Thermal resistance, junction-to-case (bottom) (DRG WSON) RθJC(bot) 10.8 °C/W 6
Gain-bandwidth product GBW 18 MHz G = 1 7
Slew rate SR 10 V/µs G = -1 7
Full power bandwidth 1.6 MHz VO = 1 VP 7
Overload recovery time 1 µs G = -10 7
Channel separation (dual and quad) -120 dB f = 1 kHz 7
Input voltage noise en 4 µVPP f = 20 Hz to 20 kHz 7
Input voltage noise density en 4.5 nV/√Hz f = 1 kHz 7
Input voltage noise density en 3.8 nV/√Hz f = 10 kHz 7
Input current noise density In 3 fA/√Hz f = 1 kHz 7
Total harmonic distortion + noise THD+N 5e-05 % G = 1, f = 1 kHz, VO = 3 VRMS 7
Total harmonic distortion + noise THD+N -126 dB G = 1, f = 1 kHz, VO = 3 VRMS 7
Output load capacitance (capacitive load drive) CLOAD 100 pF 7

CAD (KiCad official)

  • Symbol: OPA1652AIDRGR
  • Footprint: Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm
  • 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: opa1652aidrgr-etched.step / opa1652aidrgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa1652aidrgr.step / opa1652aidrgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 819ae541297cdcbd, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF