main
Ray
Publish 0.1.0
ed27259
OPA1641AQDGKRQ1
Texas Instruments · Audio Power OpAmps · VSSOP-8
OPA1641AQDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection (NC); the datasheet lists this pin as having no connection. |
| 2 | -IN | input | Inverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) - 3.5 V, and the input pins are diode-clamped to the power-supply rails. |
| 3 | +IN | input | Noninverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) - 3.5 V, and input current must be limited to 10 mA or less if the signal swings more than 0.5 V beyond the supply rails. |
| 4 | V- | power_in | Negative (lowest) power supply; the device operates from ±2.25 V to ±18 V (4.5 V to 36 V single supply). |
| 5 | NC | unconnected | No internal connection (NC); the datasheet lists this pin as having no connection. |
| 6 | OUT | output | Output; rail-to-rail swing with output current limited internally to 36 mA sourcing and -30 mA sinking. |
| 7 | V+ | power_in | Positive (highest) power supply; the device operates from ±2.25 V to ±18 V (4.5 V to 36 V single supply). |
| 8 | NC | unconnected | No internal connection (NC); the datasheet lists this pin as having no connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VS | 40 | V | 4 | |||
| Input current (absolute maximum) | IIN | -10 | 10 | mA | 4 | ||
| Operating temperature (absolute maximum) | TA | -55 | 125 | °C | 4 | ||
| Junction temperature (absolute maximum) | TJ | -65 | 150 | °C | 4 | ||
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage, single supply (recommended) | VS | 4.5 | 36 | V | Single supply | 4 | |
| Supply voltage, dual supply (recommended) | VS | 2.25 | 18 | V | Dual supply, ±VS | 4 | |
| Specified temperature (recommended) | -40 | 125 | °C | 4 | |||
| Input offset voltage | VOS | 1 | 3.5 | mV | VS = ±18 V | 5 | |
| VOS vs power supply (PSRR) | PSRR | 0.14 | 2 | μV/V | VS = ±2.25 V to ±18 V | 5 | |
| Input bias current | IB | -20 | 2 | 20 | pA | VCM = 0 V | 5 |
| Input offset current | IOS | -20 | 2 | 20 | pA | VCM = 0 V | 5 |
| Common-mode rejection ratio | CMRR | 120 | 126 | dB | VCM = (V-), 0.1 V to (V+), 3.5 V, VS = ±18 V | 5 | |
| Open-loop voltage gain | AOL | 120 | 134 | dB | (V-) + 0.2 V ≤ VO ≤ (V+), 0.2 V, RL = 10 kΩ | 6 | |
| Open-loop voltage gain | AOL | 114 | 126 | dB | (V-) + 0.35 V ≤ VO ≤ (V+), 0.35 V, RL = 2 kΩ | 6 | |
| Specified supply voltage | VS | 2.25 | 18 | V | 6 | ||
| Quiescent current (per amplifier) | IQ | 1.8 | 2.3 | mA | IOUT = 0 A | 6 | |
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -55 | 125 | °C | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 180 | °C/W | DGK (VSSOP), 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 55 | °C/W | DGK (VSSOP), 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 130 | °C/W | DGK (VSSOP), 8 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 120 | °C/W | DGK (VSSOP), 8 pins | 4 |
CAD (KiCad official)
- Symbol:
OPA1641AQDGKRQ1 - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa1641aqdgkrq1-etched.step/opa1641aqdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1641aqdgkrq1.step/opa1641aqdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
08e829ae6dee4de4, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OPA1641AQDGKRQ1
**Texas Instruments** · Audio Power OpAmps · VSSOP-8
OPA1641AQDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection (NC); the datasheet lists this pin as having no connection. |
| 2 | -IN | input | Inverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) - 3.5 V, and the input pins are diode-clamped to the power-supply rails. |
| 3 | +IN | input | Noninverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) - 3.5 V, and input current must be limited to 10 mA or less if the signal swings more than 0.5 V beyond the supply rails. |
| 4 | V- | power_in | Negative (lowest) power supply; the device operates from ±2.25 V to ±18 V (4.5 V to 36 V single supply). |
| 5 | NC | unconnected | No internal connection (NC); the datasheet lists this pin as having no connection. |
| 6 | OUT | output | Output; rail-to-rail swing with output current limited internally to 36 mA sourcing and -30 mA sinking. |
| 7 | V+ | power_in | Positive (highest) power supply; the device operates from ±2.25 V to ±18 V (4.5 V to 36 V single supply). |
| 8 | NC | unconnected | No internal connection (NC); the datasheet lists this pin as having no connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VS | | | 40 | V | | 4 |
| Input current (absolute maximum) | IIN | -10 | | 10 | mA | | 4 |
| Operating temperature (absolute maximum) | TA | -55 | | 125 | °C | | 4 |
| Junction temperature (absolute maximum) | TJ | -65 | | 150 | °C | | 4 |
| Storage temperature (absolute maximum) | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage, single supply (recommended) | VS | 4.5 | | 36 | V | Single supply | 4 |
| Supply voltage, dual supply (recommended) | VS | 2.25 | | 18 | V | Dual supply, ±VS | 4 |
| Specified temperature (recommended) | | -40 | | 125 | °C | | 4 |
| Input offset voltage | VOS | | 1 | 3.5 | mV | VS = ±18 V | 5 |
| VOS vs power supply (PSRR) | PSRR | | 0.14 | 2 | μV/V | VS = ±2.25 V to ±18 V | 5 |
| Input bias current | IB | -20 | 2 | 20 | pA | VCM = 0 V | 5 |
| Input offset current | IOS | -20 | 2 | 20 | pA | VCM = 0 V | 5 |
| Common-mode rejection ratio | CMRR | 120 | 126 | | dB | VCM = (V-), 0.1 V to (V+), 3.5 V, VS = ±18 V | 5 |
| Open-loop voltage gain | AOL | 120 | 134 | | dB | (V-) + 0.2 V ≤ VO ≤ (V+), 0.2 V, RL = 10 kΩ | 6 |
| Open-loop voltage gain | AOL | 114 | 126 | | dB | (V-) + 0.35 V ≤ VO ≤ (V+), 0.35 V, RL = 2 kΩ | 6 |
| Specified supply voltage | VS | 2.25 | | 18 | V | | 6 |
| Quiescent current (per amplifier) | IQ | | 1.8 | 2.3 | mA | IOUT = 0 A | 6 |
| Specified temperature range | | -40 | | 125 | °C | | 6 |
| Operating temperature range | | -55 | | 125 | °C | | 6 |
| Junction-to-ambient thermal resistance | RθJA | | 180 | | °C/W | DGK (VSSOP), 8 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 55 | | °C/W | DGK (VSSOP), 8 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 130 | | °C/W | DGK (VSSOP), 8 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 120 | | °C/W | DGK (VSSOP), 8 pins | 4 |
## CAD (KiCad official)
- Symbol: `OPA1641AQDGKRQ1`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `opa1641aqdgkrq1-etched.step` / `opa1641aqdgkrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa1641aqdgkrq1.step` / `opa1641aqdgkrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/opa1641-q1.pdf) (34 pp, sha256 `08e829ae6dee4de4`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/opa1641aqdgkrq1-datasheet.pdf)