main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers opa1641aqdgkrq1: viewers rendered from the public page · Ray
opa1641aqdgkrq1-etched.glb Publish 0.1.0 · Ray
opa1641aqdgkrq1-etched.step opa1641aqdgkrq1: factory component page (tier=mfr) · Ray
opa1641aqdgkrq1-hero.glb opa1641aqdgkrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
opa1641aqdgkrq1-hero.overlay.json Publish 0.1.0 · Ray
opa1641aqdgkrq1.glb Publish 0.1.0 · Ray
opa1641aqdgkrq1.kicad_mod Publish 0.1.0 · Ray
opa1641aqdgkrq1.kicad_sym Publish 0.1.0 · Ray
opa1641aqdgkrq1.lbr Publish 0.1.0 · Ray
opa1641aqdgkrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

OPA1641AQDGKRQ1

Texas Instruments · Audio Power OpAmps · VSSOP-8

OPA1641AQDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection (NC); the datasheet lists this pin as having no connection.
2 -IN input Inverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) - 3.5 V, and the input pins are diode-clamped to the power-supply rails.
3 +IN input Noninverting input; the common-mode voltage range is (V-) - 0.1 V to (V+) - 3.5 V, and input current must be limited to 10 mA or less if the signal swings more than 0.5 V beyond the supply rails.
4 V- power_in Negative (lowest) power supply; the device operates from ±2.25 V to ±18 V (4.5 V to 36 V single supply).
5 NC unconnected No internal connection (NC); the datasheet lists this pin as having no connection.
6 OUT output Output; rail-to-rail swing with output current limited internally to 36 mA sourcing and -30 mA sinking.
7 V+ power_in Positive (highest) power supply; the device operates from ±2.25 V to ±18 V (4.5 V to 36 V single supply).
8 NC unconnected No internal connection (NC); the datasheet lists this pin as having no connection.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VS 40 V 4
Input current (absolute maximum) IIN -10 10 mA 4
Operating temperature (absolute maximum) TA -55 125 °C 4
Junction temperature (absolute maximum) TJ -65 150 °C 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Supply voltage, single supply (recommended) VS 4.5 36 V Single supply 4
Supply voltage, dual supply (recommended) VS 2.25 18 V Dual supply, ±VS 4
Specified temperature (recommended) -40 125 °C 4
Input offset voltage VOS 1 3.5 mV VS = ±18 V 5
VOS vs power supply (PSRR) PSRR 0.14 2 μV/V VS = ±2.25 V to ±18 V 5
Input bias current IB -20 2 20 pA VCM = 0 V 5
Input offset current IOS -20 2 20 pA VCM = 0 V 5
Common-mode rejection ratio CMRR 120 126 dB VCM = (V-), 0.1 V to (V+), 3.5 V, VS = ±18 V 5
Open-loop voltage gain AOL 120 134 dB (V-) + 0.2 V ≤ VO ≤ (V+), 0.2 V, RL = 10 kΩ 6
Open-loop voltage gain AOL 114 126 dB (V-) + 0.35 V ≤ VO ≤ (V+), 0.35 V, RL = 2 kΩ 6
Specified supply voltage VS 2.25 18 V 6
Quiescent current (per amplifier) IQ 1.8 2.3 mA IOUT = 0 A 6
Specified temperature range -40 125 °C 6
Operating temperature range -55 125 °C 6
Junction-to-ambient thermal resistance RθJA 180 °C/W DGK (VSSOP), 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 55 °C/W DGK (VSSOP), 8 pins 4
Junction-to-board thermal resistance RθJB 130 °C/W DGK (VSSOP), 8 pins 4
Junction-to-board characterization parameter ψJB 120 °C/W DGK (VSSOP), 8 pins 4

CAD (KiCad official)

  • Symbol: OPA1641AQDGKRQ1
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa1641aqdgkrq1-etched.step / opa1641aqdgkrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa1641aqdgkrq1.step / opa1641aqdgkrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 08e829ae6dee4de4, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF