main
Ray
Publish 0.1.0
bcd9593
OP162GSZ
Analog Devices · Precision OpAmps · SOIC-8
OP162GSZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset null terminal; a potentiometer (recommended 20 kΩ) connected between Pins 1 and 8 with its wiper to VCC adjusts offset voltage, and the wiper must not be connected to VEE. |
| 2 | -IN A | input | Inverting input of amplifier A; the input voltage should be limited to ±6 V to avoid device damage, and the input current to less than 5 mA. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the common-mode input range extends from ground to within 1 V of the positive supply. |
| 4 | V- | power_in | Negative power supply (VEE); the part operates from single supplies as low as 2.7 V or dual supplies up to ±6 V. |
| 5 | NC | unconnected | No connect; the pin is not connected internally. |
| 6 | OUT A | output | Amplifier A output with rail-to-rail swing and 30 mA typical source and sink drive; the output is not short-circuit protected and must not be forced beyond ±30 mA. |
| 7 | V+ | power_in | Positive power supply (VCC); the part operates from single supplies up to 12 V. |
| 8 | NULL | passive | Offset null terminal; the other end of the offset adjustment potentiometer connection between Pins 1 and 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | 45 | 325 | µV | OP162G, OP262G, OP462G | 3 | |
| Offset Voltage | VOS | 800 | µV | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Bias Current | IB | 360 | 600 | nA | 3 | ||
| Input Bias Current | IB | 650 | nA | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Offset Current | IOS | 2.5 | 25 | nA | 3 | ||
| Input Offset Current | IOS | 40 | nA | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Voltage Range | VCM | 0 | 4 | V | 3 | ||
| Common-Mode Rejection | CMRR | 70 | 110 | dB | 0 V ≤ VCM ≤ 4.0 V, -40°C ≤ TA ≤ +125°C | 3 | |
| Large Signal Voltage Gain | AVO | 30 | V/mV | RL = 2 kΩ, 0.5 ≤ VOUT ≤ 4.5 V | 3 | ||
| Large Signal Voltage Gain | AVO | 65 | 88 | V/mV | RL = 10 kΩ, 0.5 ≤ VOUT ≤ 4.5 V | 3 | |
| Large Signal Voltage Gain | AVO | 40 | V/mV | RL = 10 kΩ, -40°C ≤ TA ≤ +125°C | 3 | ||
| Long-Term Offset Voltage | VOS | 600 | µV | G grade | 3 | ||
| Offset Voltage Drift | ∆VOS/∆T | 1 | µV/°C | 3 | |||
| Bias Current Drift | ∆IB/∆T | 250 | pA/°C | 3 | |||
| Output Voltage Swing High | VOH | 4.95 | 4.99 | V | IL = 250 µA, -40°C ≤ TA ≤ +125°C | 3 | |
| Output Voltage Swing High | VOH | 4.85 | 4.94 | V | IL = 5 mA | 3 | |
| Output Voltage Swing Low | VOL | 14 | 50 | mV | IL = 250 µA, -40°C ≤ TA ≤ +125°C | 3 | |
| Output Voltage Swing Low | VOL | 65 | 150 | mV | IL = 5 mA | 3 | |
| Short-Circuit Current | ISC | -80 | 80 | mA | Short to ground | 3 | |
| Maximum Output Current | IOUT | -30 | 30 | mA | 3 | ||
| Power Supply Rejection Ratio | PSRR | 120 | dB | VS = 2.7 V to 7 V | 3 | ||
| Power Supply Rejection Ratio | PSRR | 90 | dB | -40°C ≤ TA ≤ +125°C | 3 | ||
| Supply Current/Amplifier | ISY | 600 | 750 | µA | OP162, VOUT = 2.5 V | 3 | |
| Supply Current/Amplifier | ISY | 1 | mA | OP162, -40°C ≤ TA ≤ +125°C | 3 | ||
| Slew Rate | SR | 10 | V/µs | 1 V < VOUT < 4 V, RL = 10 kΩ | 3 | ||
| Settling Time | tS | 540 | ns | To 0.1%, AV = -1, VO = 2 V step | 3 | ||
| Gain Bandwidth Product | GBP | 15 | MHz | 3 | |||
| Phase Margin | φm | 61 | Degrees | 3 | |||
| Voltage Noise | en p-p | 0.5 | µV p-p | 0.1 Hz to 10 Hz | 3 | ||
| Voltage Noise Density | en | 9.5 | nV/√Hz | f = 1 kHz | 3 | ||
| Current Noise Density | in | 0.4 | pA/√Hz | f = 1 kHz | 3 | ||
| Supply Voltage Range | VS | 3 | 12 | V | 5 | ||
| Supply Voltage | VS | 6 | V | Absolute maximum, ±6 V | 6 | ||
| Input Voltage | VIN | 6 | V | Absolute maximum, ±6 V; limited to supply voltage above 6 V supplies | 6 | ||
| Differential Input Voltage | VID | 0.6 | V | Absolute maximum, ±0.6 V; input current limited to 5 mA above 0.6 V | 6 | ||
| Storage Temperature Range | TSTORE | -65 | 150 | °C | 6 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Junction Temperature Range | TJ | -65 | 150 | °C | 6 | ||
| Lead Temperature Range | 300 | °C | Soldering, 10 sec | 6 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 157 | °C/W | 8-Lead SOIC (S) | 6 | ||
| Thermal Resistance Junction-to-Case | θJC | 56 | °C/W | 8-Lead SOIC (S) | 6 |
CAD (KiCad official)
- Symbol:
OP162GSZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
op162gsz-etched.step/op162gsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op162gsz.step/op162gsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
07ec7633d2004ae1, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OP162GSZ
**Analog Devices** · Precision OpAmps · SOIC-8
OP162GSZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset null terminal; a potentiometer (recommended 20 kΩ) connected between Pins 1 and 8 with its wiper to VCC adjusts offset voltage, and the wiper must not be connected to VEE. |
| 2 | -IN A | input | Inverting input of amplifier A; the input voltage should be limited to ±6 V to avoid device damage, and the input current to less than 5 mA. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the common-mode input range extends from ground to within 1 V of the positive supply. |
| 4 | V- | power_in | Negative power supply (VEE); the part operates from single supplies as low as 2.7 V or dual supplies up to ±6 V. |
| 5 | NC | unconnected | No connect; the pin is not connected internally. |
| 6 | OUT A | output | Amplifier A output with rail-to-rail swing and 30 mA typical source and sink drive; the output is not short-circuit protected and must not be forced beyond ±30 mA. |
| 7 | V+ | power_in | Positive power supply (VCC); the part operates from single supplies up to 12 V. |
| 8 | NULL | passive | Offset null terminal; the other end of the offset adjustment potentiometer connection between Pins 1 and 8. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | | 45 | 325 | µV | OP162G, OP262G, OP462G | 3 |
| Offset Voltage | VOS | | | 800 | µV | -40°C ≤ TA ≤ +125°C | 3 |
| Input Bias Current | IB | | 360 | 600 | nA | | 3 |
| Input Bias Current | IB | | | 650 | nA | -40°C ≤ TA ≤ +125°C | 3 |
| Input Offset Current | IOS | | 2.5 | 25 | nA | | 3 |
| Input Offset Current | IOS | | | 40 | nA | -40°C ≤ TA ≤ +125°C | 3 |
| Input Voltage Range | VCM | 0 | | 4 | V | | 3 |
| Common-Mode Rejection | CMRR | 70 | 110 | | dB | 0 V ≤ VCM ≤ 4.0 V, -40°C ≤ TA ≤ +125°C | 3 |
| Large Signal Voltage Gain | AVO | 30 | | | V/mV | RL = 2 kΩ, 0.5 ≤ VOUT ≤ 4.5 V | 3 |
| Large Signal Voltage Gain | AVO | 65 | 88 | | V/mV | RL = 10 kΩ, 0.5 ≤ VOUT ≤ 4.5 V | 3 |
| Large Signal Voltage Gain | AVO | 40 | | | V/mV | RL = 10 kΩ, -40°C ≤ TA ≤ +125°C | 3 |
| Long-Term Offset Voltage | VOS | | | 600 | µV | G grade | 3 |
| Offset Voltage Drift | ∆VOS/∆T | | 1 | | µV/°C | | 3 |
| Bias Current Drift | ∆IB/∆T | | 250 | | pA/°C | | 3 |
| Output Voltage Swing High | VOH | 4.95 | 4.99 | | V | IL = 250 µA, -40°C ≤ TA ≤ +125°C | 3 |
| Output Voltage Swing High | VOH | 4.85 | 4.94 | | V | IL = 5 mA | 3 |
| Output Voltage Swing Low | VOL | | 14 | 50 | mV | IL = 250 µA, -40°C ≤ TA ≤ +125°C | 3 |
| Output Voltage Swing Low | VOL | | 65 | 150 | mV | IL = 5 mA | 3 |
| Short-Circuit Current | ISC | -80 | | 80 | mA | Short to ground | 3 |
| Maximum Output Current | IOUT | -30 | | 30 | mA | | 3 |
| Power Supply Rejection Ratio | PSRR | | 120 | | dB | VS = 2.7 V to 7 V | 3 |
| Power Supply Rejection Ratio | PSRR | 90 | | | dB | -40°C ≤ TA ≤ +125°C | 3 |
| Supply Current/Amplifier | ISY | | 600 | 750 | µA | OP162, VOUT = 2.5 V | 3 |
| Supply Current/Amplifier | ISY | | | 1 | mA | OP162, -40°C ≤ TA ≤ +125°C | 3 |
| Slew Rate | SR | 10 | | | V/µs | 1 V < VOUT < 4 V, RL = 10 kΩ | 3 |
| Settling Time | tS | | 540 | | ns | To 0.1%, AV = -1, VO = 2 V step | 3 |
| Gain Bandwidth Product | GBP | | 15 | | MHz | | 3 |
| Phase Margin | φm | | 61 | | Degrees | | 3 |
| Voltage Noise | en p-p | | 0.5 | | µV p-p | 0.1 Hz to 10 Hz | 3 |
| Voltage Noise Density | en | | 9.5 | | nV/√Hz | f = 1 kHz | 3 |
| Current Noise Density | in | | 0.4 | | pA/√Hz | f = 1 kHz | 3 |
| Supply Voltage Range | VS | 3 | | 12 | V | | 5 |
| Supply Voltage | VS | | | 6 | V | Absolute maximum, ±6 V | 6 |
| Input Voltage | VIN | | | 6 | V | Absolute maximum, ±6 V; limited to supply voltage above 6 V supplies | 6 |
| Differential Input Voltage | VID | | | 0.6 | V | Absolute maximum, ±0.6 V; input current limited to 5 mA above 0.6 V | 6 |
| Storage Temperature Range | TSTORE | -65 | | 150 | °C | | 6 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 6 |
| Junction Temperature Range | TJ | -65 | | 150 | °C | | 6 |
| Lead Temperature Range | | | | 300 | °C | Soldering, 10 sec | 6 |
| Thermal Resistance Junction-to-Ambient | θJA | | 157 | | °C/W | 8-Lead SOIC (S) | 6 |
| Thermal Resistance Junction-to-Case | θJC | | 56 | | °C/W | 8-Lead SOIC (S) | 6 |
## CAD (KiCad official)
- Symbol: `OP162GSZ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `op162gsz-etched.step` / `op162gsz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `op162gsz.step` / `op162gsz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/OP162_262_462.pdf) (20 pp, sha256 `07ec7633d2004ae1`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/op162gsz-datasheet.pdf)